News CNCnetPDM About us Support  
         
  

CNC_HPCCACTFINE | NCDATA

Description

Reads fine level for high-speed and high-precision machining.

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h"

FWLIBAPI short WINAPI cnc_hpccactfine(unsigned short FlibHndl, short *fine);

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

fine   [ out ]

Current fine level is returned.

0 : fine
1 : medium
2 : rough

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_FUNC
(1)
Unavailable
This function cannot be used at T Series.
EW_NOOPT
(6)
No option
The extended driver/library function is necessary.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

    The extended driver/library function is necessary.

For Ethernet connection,

    The Ethernet function and the extended driver/library function are necessary.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X X H O X X X X X X X X X X X
T (Turning) X X X X X - X X X X X X X X X X X
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X X X - X
L (Laser) - - X - - X
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

cnc_hpccatset   cnc_hpccattune   cnc_hpccselfine  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/ncdata/cnc_hpccactfine

Fanuc Focas Library | Ncdata | cnc_getmactype

Gets the type of custom macro variable which is used by... [read more]
cnc_getmactype

Fanuc Focas Library | Ncdata | cnc_getpmactype

Gets the type of P code macro variable which is used by... [read more]
cnc_getpmactype

Fanuc Focas Library | Ncdata | cnc_hpccatset

Commands CNC to set the setting data for high-speed and high-precision machining automatically.... [read more]
cnc_hpccatset

Fanuc Focas Library | Ncdata | cnc_hpccattune

Commands CNC to tune up the tuning data for high-speed and high-precision machining automatically.... [read more]
cnc_hpccattune

Fanuc Focas Library | Ncdata | cnc_hpccselfine

Selects fine level for high-speed and high-precision machining.... [read more]
cnc_hpccselfine

Fanuc Focas Library | Ncdata | cnc_rdactfixofs

Reads the active fixture offset number and the active fixture offset value specified by axis. The offset number is stored in type of IODBZOFS with binary... [read more]
cnc_rdactfixofs

Fanuc Focas Library | Ncdata | cnc_rdbaxis

Reads the command data for B axis(current command, next command). The unit of command data is as follows. Series 16/18/21, 16i/18i/21i... [read more]
cnc_rdbaxis

Fanuc Focas Library | Ncdata | cnc_rdbtofsinfo

Reads the memory type of tool offset for B axis, the available number and the auxiliary function number which means offset cancel.... [read more]
cnc_rdbtofsinfo

Fanuc Focas Library | Ncdata | cnc_rdbtofsr

Reads the tool offset value for B axis specified by s_number, e_number, type. The offset value is stored in IODBBTO with signed binary format.... [read more]
cnc_rdbtofsr

Fanuc Focas Library | Ncdata | cnc_rdexecmcode

Reads specified number of executing or executed M codes, starting from the M code group with specified number.... [read more]
cnc_rdexecmcode

Fanuc Focas Library | Ncdata | cnc_rdfixofs

Reads the fixture offset value specified by s_number, e_number, axis. The offset value is stored in data array of IODBZOR with signed binary format.... [read more]
cnc_rdfixofs

Fanuc Focas Library | Ncdata | cnc_rdhpccset

Reads setting data for High-speed and high-precision machining. The data is stored in each member of IODBHPST. This function is not... [read more]
cnc_rdhpccset

Fanuc Focas Library | Ncdata | cnc_rdhpcctuac

Reads tuning data(acc./dec. input) for high-speed and high-precision machining. The data is stored in each member of IODBHPAC. This... [read more]
cnc_rdhpcctuac

Fanuc Focas Library | Ncdata | cnc_rdhpcctupr

Reads tuning data(parameter input) for high-speed and high-precision machining. The data is stored in each member of IODBHPPR. This function is not... [read more]
cnc_rdhpcctupr

Fanuc Focas Library | Ncdata | cnc_rdhsparam

The CNC parameter shown by parameter information is read at high speed. The parameter can be read according to parameter information acquired... [read more]
cnc_rdhsparam

Fanuc Focas Library | Ncdata | cnc_rdhsprminfo

Get information for high-speed read of parameter. Got parameter information is effective until the reboot of CNC. Moreover, got... [read more]
cnc_rdhsprminfo

Fanuc Focas Library | Ncdata | cnc_rdintchk

Reads the coordinate value of interference check area specified by s_number, e_number, type. The coordinate value is stored in data... [read more]
cnc_rdintchk

Fanuc Focas Library | Ncdata | cnc_rdintinfo

Reads the available number of interference check data. It is stored in (*intinf) with binary format.... [read more]
cnc_rdintinfo

Fanuc Focas Library | Ncdata | cnc_rdmacro

Reads the custom macro variable specified by number. The data is stored in ODBM with signed binary format. The kinds of custom macro variable are as... [read more]
cnc_rdmacro

Fanuc Focas Library | Ncdata | cnc_rdmacroinfo

Reads the available number of the local macro variable and the common macro variable. Those are stored in use_no1, use_no2 of ODBMVINF with signed binary... [read more]
cnc_rdmacroinfo

Fanuc Focas Library | Ncdata | cnc_rdmacror

Reads the custom macro variable specified by datano_s, datano_e. The data is stored in IODBMR with signed binary format. The kinds of custom macro... [read more]
cnc_rdmacror

Fanuc Focas Library | Ncdata | cnc_rdmacror2

Reads the custom macro variables specified by the starting number, s_no, and number of variables, *num. The data is stored in data with double format. It... [read more]
cnc_rdmacror2

Fanuc Focas Library | Ncdata | cnc_rdmacror3

Reads the custom macro variables specified by the starting number, s_no, and number of variables, *num. In this function, when you read the... [read more]
cnc_rdmacror3

Fanuc Focas Library | Ncdata | cnc_rdmgrpdata

Reads specified number of M code group data starting from the specified number.... [read more]
cnc_rdmgrpdata

Fanuc Focas Library | Ncdata | cnc_rdparainfo

Reads the CNC parameter information specified by s_number and read_no. The CNC parameter is basically non-continuous, and the attribute like the... [read more]
cnc_rdparainfo

Fanuc Focas Library | Ncdata | cnc_rdparainfo3

Reads the CNC parameter information specified by s_number and *read_no. The CNC parameter is basically non-continuous, and the attribute like the... [read more]
cnc_rdparainfo3

Fanuc Focas Library | Ncdata | cnc_rdparam

Reads the parameter specified by number,axis(only for the parameter with axis). The data format depends on each parameter. The format of... [read more]
cnc_rdparam

Fanuc Focas Library | Ncdata | cnc_rdparam3

Reads the parameter specified by number,axis(only for the parameter with axis). In this function, the acquired... [read more]
cnc_rdparam3

Fanuc Focas Library | Ncdata | cnc_rdparam_ext

Reads the random number parameters. The parameter numbers are specified by the array of long type (prm_no[]). And the number of the array is specified by... [read more]
cnc_rdparam_ext

Fanuc Focas Library | Ncdata | cnc_rdparanum

Reads minimum, maximum, total number of the CNC parameter. The distribution of the parameter is different in each CNC model, and the new parameter may be... [read more]
cnc_rdparanum

Fanuc Focas Library | Ncdata | cnc_rdparar

Reads the parameter specified by *s_number,*e_number,axis(only for the parameter with axis). The data format depends on each parameter. The format of... [read more]
cnc_rdparar

Fanuc Focas Library | Ncdata | cnc_rdpitchinfo

Reads the available number of pitch error compensation data. It is stored in *use_no with signed binary format. In case of Series 16i/18i-W, the data... [read more]
cnc_rdpitchinfo

Fanuc Focas Library | Ncdata | cnc_rdpitchr

Reads the pitch error compensation data specified by s_number, e_number. The data is stored in data array of IODBPI with signed binary format.... [read more]
cnc_rdpitchr

Fanuc Focas Library | Ncdata | cnc_rdpmacro

Reads the P code macro variable (variable for the macro-executor) specified by number. The data is stored in ODBPM with signed binary format. It is... [read more]
cnc_rdpmacro

Fanuc Focas Library | Ncdata | cnc_rdpmacroinfo

Reads the available number of the P code macro variables (variable for the macro-executor) and the type of it. Those are stored in ODBPMINF with signed binary... [read more]
cnc_rdpmacroinfo

Fanuc Focas Library | Ncdata | cnc_rdpmacroinfo2

Reads the available number of the P code macro variables (variable for the macro-executor) and the type of it. Those are stored in ODBPMINF2 with signed binary... [read more]
cnc_rdpmacroinfo2

Fanuc Focas Library | Ncdata | cnc_rdpmacror

Reads the P code macro variables(variable for the macro-executor) specified by s_number, e_number. The data is stored in IODBPR... [read more]
cnc_rdpmacror

Fanuc Focas Library | Ncdata | cnc_rdpmacror2

Reads the P code macro variables(variables for the macro-executor) specified by the starting number, stnum, and number of variables, *num. The data is... [read more]
cnc_rdpmacror2

Fanuc Focas Library | Ncdata | cnc_rdrotvolc

Read the 3-dimensional rotary error compensation data by specified range.... [read more]
cnc_rdrotvolc

Fanuc Focas Library | Ncdata | cnc_rdrstrmcode

Reads specified number of executing or executed M codes, starting from the M code group with specified number.... [read more]
cnc_rdrstrmcode

Fanuc Focas Library | Ncdata | cnc_rdset

Reads the setting data specified by number,axis(only for the setting data with axis). The data format depends on each setting data. The format of... [read more]
cnc_rdset

Fanuc Focas Library | Ncdata | cnc_rdsetinfo

Reads the CNC setting data information specified by s_number and read_no. The CNC setting data is basically non-continuous, and the attribute like... [read more]
cnc_rdsetinfo

Fanuc Focas Library | Ncdata | cnc_rdsetnum

Reads minimum, maximum, total number of the CNC setting data. The distribution of the setting data is different in each CNC model, and the new setting... [read more]
cnc_rdsetnum

Fanuc Focas Library | Ncdata | cnc_rdsetr

Reads the setting data specified by s_number,e_number,axis(only for the setting data with axis). The data format depends on each... [read more]
cnc_rdsetr

Fanuc Focas Library | Ncdata | cnc_rdtofs

Reads the tool offset value specified by number, type. The offset value is stored in data of ODBTOFS with signed binary format.... [read more]
cnc_rdtofs

Fanuc Focas Library | Ncdata | cnc_rdtofsinfo

Reads the memory type of tool offset, and the available number of it. Those are stored in ofs_type and use_no of ODBTLINF with signed binary format.... [read more]
cnc_rdtofsinfo

Fanuc Focas Library | Ncdata | cnc_rdtofsinfo2

Reads the memory type of tool offset, the available number of it and available type of tool offset. Those are stored in ofs_type, use_no and... [read more]
cnc_rdtofsinfo2

Fanuc Focas Library | Ncdata | cnc_rdtofsr

Reads the tool offset value specified by s_number,e_number,type. The offset value is stored in IODBTO with signed binary format.... [read more]
cnc_rdtofsr

Fanuc Focas Library | Ncdata | cnc_rdvolc

Reads the 3-dimensional error compensation data by specified range.... [read more]
cnc_rdvolc

Fanuc Focas Library | Ncdata | cnc_rdvolccomp

The compensation amount at the current position of 3-dimensional error compensation axis is acquired.... [read more]
cnc_rdvolccomp

Fanuc Focas Library | Ncdata | cnc_rdwkcdsfms

Reads the work coordinate shift measured value specified by axis. The work coordinate shift measured value are stored in data array of IODBWCSF with signed... [read more]
cnc_rdwkcdsfms

Fanuc Focas Library | Ncdata | cnc_rdwkcdshft

Reads the work coordinate shift value specified by axis. The work coordinate shift value are stored in data array of IODBWCSF with signed binary format.... [read more]
cnc_rdwkcdshft

Fanuc Focas Library | Ncdata | cnc_rdzofs

Reads the work zero offset value specified by number, axis. The offset value is stored in data[0] of IODBZOFS with signed binary... [read more]
cnc_rdzofs

Fanuc Focas Library | Ncdata | cnc_rdzofsinfo

Reads the available number of work zero offset. It is stored in *use_no with signed binary format.... [read more]
cnc_rdzofsinfo

Fanuc Focas Library | Ncdata | cnc_rdzofsr

Reads the work zero offset value specified by s_number, e_number, axis. The offset value is stored in data array of IODBZOR with signed binary... [read more]
cnc_rdzofsr

Fanuc Focas Library | Ncdata | cnc_setmactype

Changes the type of custom macro variable which is used by... [read more]
cnc_setmactype

Fanuc Focas Library | Ncdata | cnc_setpmactype

Changes the type of P code macro variable which is used by... [read more]
cnc_setpmactype

Fanuc Focas Library | Ncdata | cnc_tofs_rnge

Reads the effective setting range of tool offset value specified by number, type. The effective setting range is stored in... [read more]
cnc_tofs_rnge

Fanuc Focas Library | Ncdata | cnc_wksft_rnge

Reads the effective setting range of work coordinate shift value specified by axis. The effective setting range is stored in data_min, data_max... [read more]
cnc_wksft_rnge

Fanuc Focas Library | Ncdata | cnc_wrbtofsr

Writes the tool offset value for B axis specified by datano_s, datano_e,type. The offset value must be stored in IODBBTO with signed binary format.... [read more]
cnc_wrbtofsr

Fanuc Focas Library | Ncdata | cnc_wrfixofs

Writes the fixture offset value specified by datano_s, datano_e, type. The offset value must be stored in data array of IODBZOR... [read more]
cnc_wrfixofs

Fanuc Focas Library | Ncdata | cnc_wrhpccset

Writes setting data for high-speed and high-precision machining. This function is not supported on Series 15i. The function which writes CNC... [read more]
cnc_wrhpccset

Fanuc Focas Library | Ncdata | cnc_wrhpcctuac

Writes tuning data(acc./dec. input) for high-speed and high-precision machining. This function is not supported on Series 15i. The function which writes... [read more]
cnc_wrhpcctuac

Fanuc Focas Library | Ncdata | cnc_wrhpcctupr

Writes tuning data(parameter input) for high-speed and high-precision machining. This function is not supported on Series 15i. The function... [read more]
cnc_wrhpcctupr

Fanuc Focas Library | Ncdata | cnc_wrintchk

Writes the coordinate value of interference check area specified by datano_s,datano_e,type. The coordinate value... [read more]
cnc_wrintchk

Fanuc Focas Library | Ncdata | cnc_wrmacro

Writes the custom macro variable specified by number. The data must be stored in mcr_val, dec_val with signed binary format. The kind of custom... [read more]
cnc_wrmacro

Fanuc Focas Library | Ncdata | cnc_wrmacror

Writes the custom macro variable specified by datano_s, datano_e. The data must be stored in IODBMR with signed binary format. The kind of custom... [read more]
cnc_wrmacror

Fanuc Focas Library | Ncdata | cnc_wrmacror2

Writes the custom macro variables specified by the starting number, s_no, and number of variables, *num. The data is stored in data with double format. It... [read more]
cnc_wrmacror2

Fanuc Focas Library | Ncdata | cnc_wrmgrpdata

Writes specified number of M code group data starting from the specified number.... [read more]
cnc_wrmgrpdata

Fanuc Focas Library | Ncdata | cnc_wrparam

Writes the parameter specified by datano,type(only for the parameter with axis). The data format depends on each parameter. The format of Byte/Word/2-Word... [read more]
cnc_wrparam

Fanuc Focas Library | Ncdata | cnc_wrparas

Writes all parameters stored in param. The data format depends on each parameter. The format of Byte/Word/2-Word parameter is generally signed binary.... [read more]
cnc_wrparas

Fanuc Focas Library | Ncdata | cnc_wrpitchr

Writes the pitch error compensation data specified by datano_s, datano_e. The data must be stored in data array of IODBPI with signed binary format.... [read more]
cnc_wrpitchr

Fanuc Focas Library | Ncdata | cnc_wrpmacro

Writes the P code macro variable (variable for the macro-executor) specified by number. The data must be stored in mcr_val,dec_val with signed binary... [read more]
cnc_wrpmacro

Fanuc Focas Library | Ncdata | cnc_wrpmacror

Writes the P code macro variable (variable for the macro-executor) specified by datano_s, datano_e. The data must be stored in IODBPR with signed binary... [read more]
cnc_wrpmacror

Fanuc Focas Library | Ncdata | cnc_wrpmacror2

Writes the P code macro variables(variables for the macro-executor) specified by the starting number, stnum, and number of variables, *num. The data is... [read more]
cnc_wrpmacror2

Fanuc Focas Library | Ncdata | cnc_wrrotvolc

Write the 3-dimensional rotary error compensation data by specified range.... [read more]
cnc_wrrotvolc

Fanuc Focas Library | Ncdata | cnc_wrset

Writes the setting data specified by datano,type(only for the setting data with axis). The data format depends on each setting data. The format of... [read more]
cnc_wrset

Fanuc Focas Library | Ncdata | cnc_wrsets

Writes all setting data stored in set. The data format depends on each setting data. The format of Byte/Word/2-Word setting data is generally signed binary.... [read more]
cnc_wrsets

Fanuc Focas Library | Ncdata | cnc_wrtofs

Writes the tool offset value specified by number, type. The offset value must be stored in data with signed binary format. The unit of offset... [read more]
cnc_wrtofs

Fanuc Focas Library | Ncdata | cnc_wrtofsr

Writes the tool offset value specified by datano_s,datano_e,type. The offset value must be stored in IODBTO with signed binary format.... [read more]
cnc_wrtofsr

Fanuc Focas Library | Ncdata | cnc_wrvolc

Writes the 3-dimensional error compensation data by specified range.... [read more]
cnc_wrvolc

Fanuc Focas Library | Ncdata | cnc_wrwkcdsfms

Writes the work coordinate shift measured value specified by type. The work coordinate shift measured value must be stored in data... [read more]
cnc_wrwkcdsfms

Fanuc Focas Library | Ncdata | cnc_wrwkcdshft

Writes the work coordinate shift value specified by type. The work coordinate shift value must be stored in data array of... [read more]
cnc_wrwkcdshft

Fanuc Focas Library | Ncdata | cnc_wrzofs

Writes the work zero offset value specified by datano, type. The offset value must be stored in data[0] of IODBZOFS with signed binary format.... [read more]
cnc_wrzofs

Fanuc Focas Library | Ncdata | cnc_wrzofsr

Writes the work zero offset value specified by datano_s, datano_e, type. The offset value must be stored in data array of IODBZOR... [read more]
cnc_wrzofsr

Fanuc Focas Library | Ncdata | cnc_zofs_rnge

Reads the effective setting range of work zero offset value specified by number, axis. The effective setting range is stored in... [read more]
cnc_zofs_rnge

Fanuc Focas Library | Ncdata | flist_Ncdata

CNC: Function related to CNC file data... [read more]
flist_Ncdata
Modified: 2018-06-11