News CNCnetPDM About us Support  
         
  

SYMBOL SUB-SECTION | MITSUBISHI M70 COMMANDS

Alarm history 3 (Time) Alarm history 4 (Time) Alarm history 5 (Time) Alarm history 6 (Time) Alarm history 7 (Time) Alarm history 8 (Time) Alarm history 1 (Alarm No.) Alarm history 2 (Alarm No.) Alarm

See: Device Driver for Mitsubishi controllers

CommandDefault Data TypeDescriptionPartAxisR/WData Range
M_SSEC_MSP_ALM_HIST_TM3T_LONGAlarm history 3 (Time)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_TM4T_LONGAlarm history 4 (Time)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_TM5T_LONGAlarm history 5 (Time)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_TM6T_LONGAlarm history 6 (Time)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_TM7T_LONGAlarm history 7 (Time)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_TM8T_LONGAlarm history 8 (Time)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO1T_CHARAlarm history 1 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO2T_CHARAlarm history 2 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO3T_CHARAlarm history 3 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO4T_CHARAlarm history 4 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO5T_CHARAlarm history 5 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO6T_CHARAlarm history 6 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO7T_CHARAlarm history 7 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_ALM_HIST_NO8T_CHARAlarm history 8 (Alarm No.)--ORW0x00 to 0xFF
M_SSEC_MSP_MNT1T_STRMaintenance history (MNT1)--OR
M_SSEC_MSP_MNT2T_STRMaintenance history (MNT2)--OR
M_SSEC_MSP_MNT3T_STRMaintenance history (MNT3)--OR
M_SSEC_MSP_MNT4T_STRMaintenance history (MNT4)--OR
M_SSEC_MSP_SYST_STR/SYS--OR
M_SSEC_MSP_CMD1T_STR / T_LONGControl input 1--OR
M_SSEC_MSP_CMD2T_STR / T_LONGControl input 2--OR
M_SSEC_MSP_CMD3T_STR / T_LONGControl input 3--OR
M_SSEC_MSP_CMD4T_STR / T_LONGControl input 4--OR
M_SSEC_MSP_STS1T_STR / T_LONGControl output 1--OR
M_SSEC_MSP_STS2T_STR / T_LONGControl output 2--OR
M_SSEC_MSP_STS3T_STR / T_LONGControl output 3--OR
M_SSEC_MSP_STS4T_STR / T_LONGControl output 4--OR
M_SSEC_MSP_SPNDL_ANGLT_DOUBLESpindle angle--OR
M_SSEC_MSP_CMD5LT_LONGControl input 5L--OR-32768 to 32767
M_SSEC_MSP_CMD5HT_LONGControl input 5H--OR-32768 to 32767
M_SSEC_MSP_CMD6LT_LONGControl input 6L--OR-32768 to 32767
M_SSEC_MSP_CMD6HT_LONGControl input 6H--OR-32768 to 32767
M_SSEC_MSP_STS5LT_LONGControl output 5L--OR-32768 to 32767
M_SSEC_MSP_STS5HT_LONGControl output 5H--OR-32768 to 32767
M_SSEC_MSP_STS6LT_LONGControl output 6L--OR-32768 to 32767
M_SSEC_MSP_STS6HT_LONGControl output 6H--OR-32768 to 32767
M_SSEC_MSP_CMD5T_STR / T_LONGControl input 5--OR-32768 to 32767
M_SSEC_MSP_CMD6T_STR / T_LONGControl input 6--OR-32768 to 32767
M_SSEC_MSP_STS5T_STR / T_LONGControl output 5--OR-32768 to 32767
M_SSEC_MSP_STS6T_STR / T_LONGControl output 6--OR-32768 to 32767
M_SSEC_MSP_ALM_CLRT_CHARAlarm history clear--OW0
M_SSEC_MSP_FEEDT_LONGFeedrate--OR
M_SSEC_MSP_MAX_CUR1T_SHORTMAX current 1--OR
M_SSEC_MSP_MAX_CUR2T_SHORTMAX current 2--OR
M_SSEC_MSP_MAX_CUR3T_SHORTMAX current 3--OR
M_SSEC_MSP_OVER_LOADT_SHORTOverload--OR
M_SSEC_MSP_OVER_REGT_SHORTRegenerative load--OR
M_SSEC_MSP_EST_DTORQT_SHORTEstimated disturbance torque--OR
M_SSEC_MSP_MAX_DTORQT_SHORTMAX disturbance torque--OR
M_SSEC_MSP_LOAD_INERT_SHORTLoad inertia ratio--OR
M_SSEC_MSP_AFLT_FREQT_SHORTAFLT frequency--OR
M_SSEC_MSP_AFLT_GAINT_SHORTAFLT gain--OR
M_SSEC_MSP_GRDSPT_FLOATBIN/T_LONGGrind interval--OR
M_SSEC_MSP_GRIDT_FLOATBIN/T_LONGGrid amount--OR
M_SSEC_MSP_MAC_POST_FLOATBIN/T_LONGMachine position--OR
M_SSEC_MSP_MOT_POST_FLOATBIN/T_LONGMotor end FB--OR
M_SSEC_MSP_FB_ERRORT_LONGFB error--OR
M_SSEC_MSP_DFB_COMPT_LONGDFB compensation amount--OR
M_SSEC_MSP_MOT_DT_NOT_STRSerial No. of motor end encoder--OR
M_SSEC_MSP_MAC_DT_NOT_STRSerial No. of machine end encoder--OR
M_SSEC_MSP_TAPERR_WIDET_FLOATBIN/T_LONGSynchronous tapping width error (Max value)--OR99999.999
M_SSEC_MSP_TAPERR_ANGLET_FLOATBIN/T_LONGSynchronous tapping angle error (Max value)--OR99999.999
M_SSEC_MSP_SP_TEMPERATURET_SHORTSpindle thermister temperature--OR
M_SSEC_MSP_ALM_NO(x)T_CHARAlarm No. (x=1 to 32)--OW0
M_SSEC_MSP_ALM_TIMES(x)T_LONGThe number of times of alarm (x=1 to 32)--ORW(Setting is only 0)
M_SSEC_MSP_DA_ADDRESS1T_LONGDA address 1--OR0000 to FFFF
M_SSEC_MSP_DA_OUTPUT1T_LONGDA output 1--OR
M_SSEC_MSP_DA_ADDRESS2T_LONGDA address 2--OR0000 to FFFF
M_SSEC_MSP_DA_OUTPUT2T_LONGDA output 2--OR
M_SSEC_MSP_ALM_TIMES_CLRT_CHARClear all the number of times of alarms--OW0
M_SSEC_HWCFG_RAS_BATTERY_USEDT_LONGUsed years of battery----R/W Other than T_STR (Ten-fold value is returned) 25--> 2.5 years T_STR "2.5"-->2.5 years *Setting is only 0
M_SSEC_HWCFG_RAS_MAIN_UNIT_TEMPT_STR/T_LONGControl unit temperature----R Other than T_STR 1000-fold value of temperature (deg) -12500-->-12.5 deg T_STR -12.5 --> -12.5 deg
M_SSEC_HWCFG_RAS_MAIN_UNIT_FAN_REVT_LONGThe number of revolutions of control unit fan----RT_STR: 1 digit below decimal point Other than T_STR: 1000-fold data
M_SSEC_HWCFG_RAS_MAIN_UNIT_TEMP2T_STR/T_LONGControl unit temperature 2----R Other than T_STR 1000-fold value of temperature (deg) -12500-->-12.5 deg T_STR -12.5 --> -12.5 deg
M_SSEC_HWCFG_RAS_SV_COMERR_NOST_LONGServo communication error 1 the number of times----R0 to 2147483647
M_SSEC_HWCFG_RAS_SV_COMERR_ACCT_LONGServo communication error 1 the accumulated number of times----R/W0 to 2147483647 *Setting is only 0
M_SSEC_HWCFG_RAS_RIO_COMERR_NOST_LONGRIO communication error the number of times----R0 to 2147483647
M_SSEC_HWCFG_RAS_RIO_COMERR_ACCT_LONGRIO communication error the accumulated number of times----R/W0 to 2147483647 *Setting is only 0
M_SSEC_HWCFG_RAS_RIO_CHNODE1T_STRRIO channel No./Station No. 1----R
M_SSEC_HWCFG_RAS_RIO_CHNODE2T_STRRIO channel No./Station No. 2----R/W0: Clear
M_SSEC_HWCFG_RAS_ETHER_COMERR_NOST_LONGEthernet communication error the number of times----R0 to 2147483647
M_SSEC_HWCFG_RAS_ETHER_COMERR_ACCT_LONGEthernet communication error the accumulated number of times----R/W0 to 2147483647 *Setting is only 0
M_SSEC_HWCFG_RAS_SV_ERR_NOS(x)T_LONGServo communication error the number of times (x=1 to 8)----R0 to 2147483647
M_SSEC_HWCFG_RAS_SV_ERR_ACC(x)T_LONGServo communication error the accumulated number of times (x=1 to 8)----R/W0 to 2147483647 *Setting is only 0
M_SSEC_HWCFG_CREDIT_STAUTST_CHARCredit system status----R0: Disabled, 1: Enabled
M_SSEC_HWCFG_CREDIT_TIMELIMITT_STRTime limit of credit system----R
M_SSEC_HWCFG_CCLINK_STATUST_CHARCC-Link status----R0: Disabled, 1: Enabled
M_SSEC_SMP_PRM_AT_SMP_AXNOT_LONGTarget axis No. (For auto tuning)----RW0 to Max number of enable d axes
M_SSEC_SMP_PRM_AT_MSIG_RATET_SHORTM sys vibration sampling frequency (For auto tuning)--R/W0 to 4
M_SSEC_SMP_PRM_STOP_DELAYT_LONGStop delay time----RW0 to 1000000
M_SSEC_SMP_PRM_SAMPLING_NOST_LONGThe number of pieces of sampling data----R--
M_SSEC_SMP_PRM_SMP_STST_SHORTSampling status----R0: Stopping sampling 1: Waiting for trigger 2: Executing sampling 3: Preparing to stop (during sampling)
M_SSEC_BASEPRM_HANACDCT_CHARTime constant 0 for handle feedO--RW0 to 9
M_SSEC_BASEPRM_MMACSETT_CHARMacro call for M commandO--RW0,1
M_SSEC_BASEPRM_SMACSETT_CHARMacro call for S commandO--RW0,1
M_SSEC_BASEPRM_TMACSETT_CHARMacro call for T commandO--RW0,1
M_SSEC_BASEPRM_BMACSETT_CHARMacro call with 2nd miscellaneous codeO--RW0,1
M_SSEC_BASEPRM_SSELECT_CHARSelect initial spindle controlO--RW0,1
M_SSEC_BASEPRM_G0ACCT_CHARValidate acceleration and deceleration with inclination angle constant G0O--RW0,1
M_SSEC_BASEPRM_G1ACCT_CHARValidate acceleration and deceleration with inclination angle constant G1O--RW0,1
M_SSEC_BASEPRM_MIROFST_LONGDistance between facing turretsO--RW0 to 99999.999
M_SSEC_BASEPRM_TMIRS1T_LONGSelect turrets as facing turrets with T command 1O--RW0x00000000 to 0xFFFFFFFF
M_SSEC_BASEPRM_TMIRS2T_LONGSelect turrets as facing turrets with T command 2O--RW0x00000000 to 0xFFFFFFFF
M_SSEC_BASEPRM_G0BDCCT_CHARBefore G0 interpolationO--RW0,1
M_SSEC_BASEPRM_G1BFT_LONGMaximum speedO--RW1 to 1000000
M_SSEC_BASEPRM_G1BTLT_SHORTTime constantO--RW1 to 5000
M_SSEC_BASEPRM_MRCKT_DOUBLEArc radius error compensation factorO--RW-60.0 to 20.0
M_SSEC_BASEPRM_CIRDECT_LONGArc deceleration speedO--RW1 to 1000000
M_SSEC_BASEPRM_RSTGMDT_LONGModal G code resetO--RW0x00000000 to 0x7FFFFFFF
M_SSEC_BASEPRM_FHTYPT_CHARFeed hold stop typeO--RW0 to 2
M_SSEC_BASEPRM_FHNOT_LONGFeed hold external signal deviceO--RW0x000 to 0x13F
M_SSEC_BASEPRM_PROAXYT_FLOATBIN/T_LONGSide 1 of inclination angleO--RW9999.999
M_SSEC_BASEPRM_MACAXYT_FLOATBIN/T_LONGSide 2 of inclination angleO--RW9999.999
M_SSEC_BASEPRM_MACAXXT_FLOATBIN/T_LONGSide 3 of inclination angleO--RW9999.999
M_SSEC_BASEPRM_EXTDCCT_LONGExternal deceleration levelO--RW1 to 1000000
M_SSEC_BASEPRM_AUX01T_STR/T_LONGaux01 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX02T_STR/T_LONGaux02----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX03T_STR/T_LONGaux03----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX04T_STR/T_LONGaux04----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX05T_STR/T_LONGaux05 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX06T_STR/T_LONGaux06----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX07T_STR/T_LONGaux07----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX08T_STR/T_LONGaux08 (Do not use)----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX09T_STR/T_LONGaux09----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX10T_STR/T_LONGaux10----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX11T_STR/T_LONGaux11----RW0x00 to 0xFF
M_SSEC_BASEPRM_AUX12T_STR/T_LONGaux12----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET01T_STR/T_LONGset01----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET02T_STR/T_LONGset02 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET03T_STR/T_LONGset03 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET04T_STR/T_LONGset04 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET05T_STR/T_LONGset05 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET06T_STR/T_LONGset06----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET07T_STR/T_LONGset07 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET08T_STR/T_LONGset08----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET09T_STR/T_LONGset09----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET10T_STR/T_LONGset10 (Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET11T_STR/T_LONGset11----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET12T_STR/T_LONGset12----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET13T_STR/T_LONGset13(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET14T_STR/T_LONGset14(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET15T_STR/T_LONGset15(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET16T_STR/T_LONGset16(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET17T_STR/T_LONGset17(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET18T_STR/T_LONGset18----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET19T_STR/T_LONGset19(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET20T_STR/T_LONGset20(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET21T_STR/T_LONGset21(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET22T_STR/T_LONGset22(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET23T_STR/T_LONGset23(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET24T_STR/T_LONGset24(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET25T_STR/T_LONGset25(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET26T_STR/T_LONGset26(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET27T_STR/T_LONGset27(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET28T_STR/T_LONGset28(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET29T_STR/T_LONGset29(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET30T_STR/T_LONGset30(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET31T_STR/T_LONGset31(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET32T_STR/T_LONGset32(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET33T_STR/T_LONGset33(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET34T_STR/T_LONGset34(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET35T_STR/T_LONGset35(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_SET36T_STR/T_LONGset36(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT01T_STR/T_LONGext01----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT02T_STR/T_LONGext02(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT03T_STR/T_LONGext03----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT04T_STR/T_LONGext04(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT05T_STR/T_LONGext05(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT06T_STR/T_LONGext06(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT07T_STR/T_LONGext07----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT08T_STR/T_LONGext08(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT09T_STR/T_LONGext09(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT10T_STR/T_LONGext10(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT11T_STR/T_LONGext11(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT12T_STR/T_LONGext12(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT13T_STR/T_LONGext13----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT14T_STR/T_LONGext14(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT15T_STR/T_LONGext15(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT16T_STR/T_LONGext16(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT17T_STR/T_LONGext17(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT18T_STR/T_LONGext18(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT19T_STR/T_LONGext19(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT20T_STR/T_LONGext20(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT21T_STR/T_LONGext21(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT22T_STR/T_LONGext22(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT23T_STR/T_LONGext23----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT24T_STR/T_LONGext24(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT25T_STR/T_LONGext25(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT26T_STR/T_LONGext26(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT27T_STR/T_LONGext27(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT28T_STR/T_LONGext28(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT29T_STR/T_LONGext29(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT30T_STR/T_LONGext30(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT31T_STR/T_LONGext31(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT32T_STR/T_LONGext32(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT33T_STR/T_LONGext33(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT34T_STR/T_LONGext34(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT35T_STR/T_LONGext35(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_EXT36T_STR/T_LONGext36(Not used)----RW0x00 to 0xFF
M_SSEC_BASEPRM_NRFCHKT_CHAROrigin neighboring check method----RW0 to 2
M_SSEC_BASEPRM_RETPRGT_LONGAutomatic return by program restart----RW0,1
M_SSEC_BASEPRM_V1COM_NT_SHORTNo. of #100 address part system common variables----RW0 to 100
M_SSEC_BASEPRM_V0COM_NT_SHORTNo. of #500 address part system common variables----RW0 to 500
M_SSEC_BASEPRM_INPSTYPT_CHARDeceleration check specification type (InpsTyp)----RW0,1
M_SSEC_BASEPRM_GTYPET_SHORTModel switch (Gtype)----RW0,1
M_SSEC_BASEPRM_WT_MMINT_LONGTiming synchronization M code (Minimum) 0,100 to 99999999----RW100 to 99999999
M_SSEC_BASEPRM_WT_MMAXT_LONGTiming synchronization M code (Maximum) 0,100 to 99999999----RW100 to 99999999
M_SSEC_BASEPRM_TBASET_LONGTool life management standard number----RW0 to 9999
M_SSEC_BASEPRM_TAPDWLT_SHORTSynchronous tap hole bottom wait time----RW0 to 999
M_SSEC_BASEPRM_TAPINPT_SHORTSynchronous tap in-position check width (tap axis)----RW0 to 32767
M_SSEC_BASEPRM_CROSSCOMT_UCHARReference of common variables common for part systems (CrossCom)----RW0 to 1
M_SSEC_BASEPRM_CHOP_RT_SHORTChopping compensation amount memory area R register head No. (chop_R)----RW1900 to 2782
M_SSEC_BASEPRM_PLC_CONST_EXTT_SHORTPLC constant extension number--R/W0 to 750
M_SSEC_BASEPRM_3D_ATC_TYPET_CHAR3D tool change method----RW0 to 2
M_SSEC_BASEPRM_TLM_TYPET_CHARTLM type----RW0 to 1
M_SSEC_BASEPRM_EMGCNTT_UCHAREmergency stop contactor shut-off time----RW0 to 60
M_SSEC_BASEPRM_MCDP1T_SHORTContactor weld detection device 1----RW0000 to 02FF
M_SSEC_BASEPRM_MCDP2T_SHORTContactor weld detection device 2----RW0000 to 02FF
M_SSEC_BASEPRM_F_BUS_INIT_DELAYT_CHARFieldbus communication error invalid time----RW0 to 255
M_SSEC_BASEPRM_LMC_RESTRAINT_CHARLost motion compensation restraint in handle mode----RW0 to 1
M_SSEC_BASEPRM_DIDOREFRESHT_CHARDI/DO refresh cycle----RW0 to 2
M_SSEC_BASEPRM_MAN_SMGT_UCHARManual feed acceleration/deceleration selection----RW0 to 1
M_SSEC_BASEPRM_N400VALTYPET_UCHAR#400 address variable type----RW0 to 1
M_SSEC_BASEPRM_REVSVTRGT_CHARTrigger switching to save arbitrary reverse run data----RW0 to 1
M_SSEC_BASEPRM_MCDP3T_SHORTContactor weld detection device 3----RW0000 to 02FF
M_SSEC_BASEPRM_SSC_RIOT_UCHARSafety observation remote I/O connection----RW0 to 1
M_SSEC_BASEPRM_DOOR1T_SHORTDoor 1 switch input device----RW0000 to 02FF
M_SSEC_BASEPRM_DOOR2T_SHORTDoor 2 switch input device----RW0000 to 02FF
M_SSEC_BASEPRM_MCCT1T_SHORTContactor shut-off output 1 device----RW0000 to 02FF
M_SSEC_BASEPRM_MCCT2T_SHORTContactor shut-off output 2 device----RW0000 to 02FF
M_SSEC_BASEPRM_MCCT3T_SHORTContactor shut-off output 3 device----RW0000 to 02FF
M_SSEC_BASEPRM_MCHKT1T_LONGContactor operation check allowance time 1----RW0 to 30000
M_SSEC_BASEPRM_MCHKT2T_LONGContactor operation check allowance time 2----RW0 to 30000
M_SSEC_BASEPRM_MCHKT3T_LONGContactor operation check allowance time 3----RW0 to 30000
M_SSEC_BASEPRM_PLCUNITT_STRPLC unitO-RWA,B,C,D,E
M_SSEC_BASEPRM_PLCPLCUNITT_STRPLC unit (PLC)--RWA,B,C,D,E
M_SSEC_BASEPRM_MCMPUNITT_STRMachine error compensation unitO-RWA,B,C,D,E
M_SSEC_BASEPRM_PLCMCMPUNITT_STRMachine error compensation unit (PLC)--RWA,B,C,D,E
M_SSEC_BASEPRM_SYSTEMTYPET_CHARMachine type selection--RWM,L
M_SSEC_BASEPRM_NORIOCHKT_BITDisable RIO-not-connected detection--RW0 to 1
M_SSEC_BASEPRM_ATST_CHARATS function enabled--RW0 to 1
M_SSEC_BASEPRM_AUX_ACCT_CHARAuxiliary axis constant inclination--RW0 to 1
M_SSEC_BASEPRM_POLYAXT_CHARRotary tool axis numberO--RW0 to 8
M_SSEC_BASEPRM_G0IPFGT_CHARG1-->G0 deceleration checkO--RW0,1
M_SSEC_BASEPRM_G1IPFGT_CHARG1-->G1 deceleration checkO--RW0,1
M_SSEC_BASEPRM_CKREF2T_CHARSecond reference position return checkO--RW0,1
M_SSEC_BASEPRM_F1FMT_LONGUpper limit of F1 digit feedrateO--RW0 to 60000
M_SSEC_BASEPRM_F1CONSTT_SHORTF1 digit feedrate change constantO--RW0 to 32767
M_SSEC_BASEPRM_DOORHT_CHARShorten door interlock II axis stop timeO--RW0,1
M_SSEC_BASEPRM_DOORPMT_LONGSignal input device 1 for door interlock II by each part systemO--RW0x000 to 0x100
M_SSEC_BASEPRM_DOORPST_LONGSignal input device 2 for door interlock II by each part systemO--RW0x000 to 0x100
M_SSEC_BASEPRM_STAPMT_LONGM code for synchronous tap selectionO--RW0 to 99999999
M_SSEC_BASEPRM_EXP_LINAXT_STRExponential function interpolation linear axis ('A' to 'Z')O--RWAxis name
M_SSEC_BASEPRM_EXP_ROTAXT_STRExponential function interpolation rotary axis ('A' to 'Z')O--RWAxis name
M_SSEC_BASEPRM_MILL_AXT_STRLathe milling rotary axis No.O--RWAxis name
M_SSEC_BASEPRM_MILL_CT_CHARLathe milling rotary axis name 0: Y axis 1: C axisO--RW0: Y axis 1: C axis
M_SSEC_BASEPRM_POLMT_CHARSpindle polygon base axis No.O--RW0 to 8
M_SSEC_BASEPRM_POLST_CHARSpindle polygon synchronous axis No.O--RW0 to 8
M_SSEC_BASEPRM_TCHG34T_CHARAdditional axis tool compensation operationO--RW0,1
M_SSEC_BASEPRM_C_MINT_FLOATBIN/T_LONGMinimum turning angle (C_min)O--RW0 to 360.000
M_SSEC_BASEPRM_C_AXIST_CHARNormal line control axis (C_axis)O--RW1 to 8
M_SSEC_BASEPRM_C_FEEDT_LONGNormal line control axis turning speed (C_feed)O--RW1 to 1000000
M_SSEC_BASEPRM_C_TYPET_LONGNormal line control type (C_type)O--RW0,1
M_SSEC_BASEPRM_MILL_PAXT_STRMilling linear axis nameO--RWAxis name
M_SSEC_BASEPRM_SNG44_1T_CHARSpindle No. for G44.1 commandO--RW0 to 4
M_SSEC_BASEPRM_C_LENGT_FLOATBIN/T_LONGMinimum turning movement amount (C_leng)O--RW0 to 99999.999
M_SSEC_BASEPRM_CRS_AX1T_STRCross machining control axis with 1st axisO--RWAxis name
M_SSEC_BASEPRM_CRS_AX2T_STRCross machining control axis with 2nd axisO--RWAxis name
M_SSEC_BASEPRM_CRS_AX3T_STRCross machining control axis with 3rd axisO--RWAxis name
M_SSEC_BASEPRM_CRS_AX4T_STRCross machining control axis with 4th axisO--RWAxis name
M_SSEC_BASEPRM_CRS_AX5T_STRCross machining control axis with 5th axisO--RWAxis name
M_SSEC_BASEPRM_CRS_AX6T_STRCross machining control axis with 6th axisO--RWAxis name
M_SSEC_BASEPRM_CRS_AX7T_STRCross machining control axis with 7th axisO--RWAxis name
M_SSEC_BASEPRM_CRS_AX8T_STRCross machining control axis with 8th axisO--RWAxis name
M_SSEC_BASEPRM_3DCDCT_LONGSwitch workpiece coordinate display during 3D coordinate conversionO--RW0,1
M_SSEC_BASEPRM_3DREMCT_LONGSwitch remaining command display during 3D coordinate conversionO--RW0,1
M_SSEC_BASEPRM_3DCDRCT_LONGSwitch coordinate reading during 3D coordinate conversionO--RW0,1
M_SSEC_BASEPRM_3DSPDT_LONGHole drilling speed during 3D coordinate conversionO--RW0 to 1000000
M_SSEC_BASEPRM_HELGEART_STRHelical machining base axisO--RWA to Z
M_SSEC_BASEPRM_3DSPDSLCTT_LONGSwitch drill axis's mode from rapid traverse during 3D coordinateO--RW0,1
M_SSEC_BASEPRM_SFILTG1T_LONGG01 soft acceleration/deceleration filterO--RW0 to 200
M_SSEC_BASEPRM_SFILTG0T_LONGG00 soft acceleration/deceleration filterO--RW0 to 200
M_SSEC_BASEPRM_SFILT2T_LONGSoft acceleration/deceleration filter 2O--RW0 to 50
M_SSEC_BASEPRM_SSSDIST_LONGSSS control adjustment coefficient fixed value selectionO--RW0,1
M_SSEC_BASEPRM_CIRORPT_CHARArc command overlapO--RW0,1
M_SSEC_BASEPRM_RET1T_UCHARReturn type 1O-R0x00 to 0xFF
M_SSEC_BASEPRM_RET2T_UCHARReturn type 2O-R0x00 to 0xFF
M_SSEC_BASEPRM_ANIAXDIRT_UCHARAnimate ax directO-RW0 to 7
M_SSEC_BASEPRM_ANIAX1T_STRAnimate ax-1O-RWAxis name
M_SSEC_BASEPRM_ANIAX2T_STRAnimate ax-2O-RWAxis name
M_SSEC_BASEPRM_ANIAX3T_STRAnimate ax-3O-RWAxis name
M_SSEC_BASEPRM_HACCCT_LONGArc radius clamp acceleration (Hacc_c)O--RW99999999
M_SSEC_BASEPRM_MACCCT_LONGAcceleration check at middle speed (Macc_c)O--RW99999999
M_SSEC_BASEPRM_LACCCT_LONGAcceleration check at low speed (Lacc_c)O--RW99999999
M_SSEC_BASEPRM_X_HCOFAT_LONGX axis high acceleration coefficient β (Hcof_A)O--RW99999999
M_SSEC_BASEPRM_X_HCOFBT_LONGX axis high acceleration coefficient α (Hcof_B)O--RW99999999
M_SSEC_BASEPRM_X_MCOFAT_LONGX axis middle acceleration coefficient β (Mcof_A)O--RW99999999
M_SSEC_BASEPRM_X_MCOFBT_LONGX axis middle acceleration coefficient α (Mcof_B)O--RW99999999
M_SSEC_BASEPRM_X_LCOFAT_LONGX axis low acceleration coefficient β (Lcof_A)O--RW99999999
M_SSEC_BASEPRM_X_LCOFBT_LONGX axis low acceleration coefficient α (Lcof_B)O--RW99999999
M_SSEC_BASEPRM_X_MAGCT_LONGX axis change magnification θ (mag_C)O--RW99999999
M_SSEC_BASEPRM_Y_HCOFAT_LONGY axis high acceleration coefficient β (Hcof_A)O--RW99999999
M_SSEC_BASEPRM_Y_HCOFBT_LONGY axis high acceleration coefficient α (Hcof_B)O--RW99999999
M_SSEC_BASEPRM_Y_MCOFAT_LONGY axis middle acceleration coefficient β (Mcof_A)O--RW99999999
M_SSEC_BASEPRM_Y_MCOFBT_LONGY axis middle acceleration coefficient α (Mcof_B)O--RW99999999
M_SSEC_BASEPRM_Y_LCOFAT_LONGY axis low acceleration coefficient β (Lcof_A)O--RW99999999
M_SSEC_BASEPRM_Y_LCOFBT_LONGY axis low acceleration coefficient α (Lcof_B)O--RW99999999
M_SSEC_BASEPRM_Y_MAGCT_LONGY axis change magnification θ (mag_C)O--RW99999999
M_SSEC_BASEPRM_STNADT_CHARstation addr----RW1 to 7
M_SSEC_BASEPRM_INSIZT_CHARDin size----RW0 to 32
M_SSEC_BASEPRM_OTSIZT_CHARDout size----RW0 to 32
M_SSEC_BASEPRM_DLENGT_CHARdata length----RW0 to 2: 7 bits , 3: 8 bits
M_SSEC_BASEPRM_BRATET_CHARbaud rate----RW0 to 6
M_SSEC_BASEPRM_STPBTT_CHARstop bit----RW0,1: 1 bit , 2,3: 2 bits
M_SSEC_BASEPRM_PRITYT_CHARparity check----RW0,1
M_SSEC_BASEPRM_EVPTYT_CHAReven parity----RW0,1
M_SSEC_BASEPRM_TIMINT_SHORTTout (ini)----RW0 to 999
M_SSEC_BASEPRM_TIMRNT_SHORTTout (run)----RW0 to 999
M_SSEC_BASEPRM_CLOCKT_CHARclock select----RW0,1
M_SSEC_BASEPRM_WCOUNTMT_CHARWorkpiece count MO--RW0 to 99
M_SSEC_BASEPRM_WCOUNTT_LONGWorkpiece countO--RW0 to 999999
M_SSEC_BASEPRM_WCOUNTMAXT_LONGWorkpiece count limitO--RW0 to 999999
M_SSEC_BASEPRM_PG37FT_LONGAutomatic tool length measurement speedO--RW1 to 100000
M_SSEC_BASEPRM_PG37RT_FLOATBIN/T_LONGAutomatic tool length measurement deceleration zone rO--RW0 to 99999.999
M_SSEC_BASEPRM_PG37DT_FLOATBIN/T_LONGAutomatic tool length measurement deceleration zone dO--RW0 to 99999.999
M_SSEC_BASEPRM_OVRIDET_CHARAutomatic corner overrideO--RW0 to 100
M_SSEC_BASEPRM_ANGLET_LONGAutomatic corner override maximum angleO--RW0 to 180
M_SSEC_BASEPRM_INNT_FLOATBIN/T_LONGAutomatic corner override deceleration zoneO--RW0 to 99999.999
M_SSEC_BASEPRM_MAMOU1T_FLOATBIN/T_LONGWear data input maximum absolute valueO--RW0 to 99.999
M_SSEC_BASEPRM_MAMOU2T_FLOATBIN/T_LONGWear data input maximum increment valueO--RW0 to 99.999
M_SSEC_BASEPRM_G73T_FLOATBIN/T_LONGG73 returnO--RW0 to 99999.999
M_SSEC_BASEPRM_G83T_FLOATBIN/T_LONGG83 returnO--RW0 to 99999.999
M_SSEC_BASEPRM_CHANFT_CHARChamfering amountO--RW0 to 127
M_SSEC_BASEPRM_G78T_CHARAngleO--RW0 to 89
M_SSEC_BASEPRM_AMARIT_FLOATBIN/T_LONGG71 minimum cut amountO--RW0 to 99.999
M_SSEC_BASEPRM_LAPDLTT_FLOATBIN/T_LONGDelta DO--RW0 to 99.999
M_SSEC_BASEPRM_PEKRVMT_FLOATBIN/T_LONGG84/G74 returnO--RW0 to 999.999
M_SSEC_BASEPRM_RCOMPT_CHARAccuracy factorO--RW0 to 99
M_SSEC_BASEPRM_FCORNT_CHARCorner deceleration angleO--RW0 to 89
M_SSEC_BASEPRM_RCOMP_CHGT_LONGAccuracy factor changeO--RW0,1
M_SSEC_BASEPRM_RCOMP1T_LONGCorner accuracy factorO--RW-1000 to 99
M_SSEC_BASEPRM_RCOMP2T_LONGCurve accuracy factorO--RW-1000 to 99
M_SSEC_BASEPRM_SPLINET_CHARHigh-accuracy spline enabledO--RW0/1
M_SSEC_BASEPRM_SPCAN_ANGLT_SHORTCancel angleO--RW0 to 180
M_SSEC_BASEPRM_DISTTH1T_FLOATBIN/T_LONGChord error 1O--RW0 to 100.000
M_SSEC_BASEPRM_DISTTH2T_FLOATBIN/T_LONGChord error 2O--RW0 to 100.000
M_SSEC_BASEPRM_MINLENGT_FLOATBIN/T_LONGFairing lengthO--RW0 to 100.000
M_SSEC_BASEPRM_MINUTET_CHARMinute lengthO--RW-1 to 127
M_SSEC_BASEPRM_FAIRING_ONT_LONGFairing enabledO--RW0,1
M_SSEC_BASEPRM_ACCCLAMP_ONT_LONGAcceleration clamp enabledO--RW0,1
M_SSEC_BASEPRM_ACCCLAMP_MAGT_LONGAcceleration clamp magnificationO--RW0 to 999
M_SSEC_BASEPRM_CORDEC_JUDGET_LONGCorner judge changeO--RW0,1
M_SSEC_BASEPRM_CORDEC_JUDGE_LT_FLOATBIN/T_LONGCorner judge lengthO--RW0 to 99999.999
M_SSEC_BASEPRM_C_ROTRT_FLOATBIN/T_LONGC axis rotation radiusO--RW0 to 99999.999
M_SSEC_BASEPRM_C_CONRT_FLOATBIN/T_LONGC axis insertion radiusO--RW0 to 99999.999
M_SSEC_BASEPRM_HDL_OFST_FLOATBIN/T_LONGHandle compensation amountO--RW0 to 99999.999
M_SSEC_BASEPRM_PRUNIT10PRMT_LONGUnit 10-fold----RW0 to 10000
M_SSEC_BASEPRM_LAPCUTT_FLOATBIN/T_LONGG71 cut-inO--RW0 to 99999.999
M_SSEC_BASEPRM_G71T_FLOATBIN/T_LONGG71 pull upO--RW0 to 99999.999
M_SSEC_BASEPRM_LAPXT_FLOATBIN/T_LONGG73 cutting XO--RW99999.999
M_SSEC_BASEPRM_LAPZT_FLOATBIN/T_LONGG73 cutting ZO--RW99999.999
M_SSEC_BASEPRM_LAPCTT_LONGG73 number of timesO--RW0 to 99999
M_SSEC_BASEPRM_G74T_FLOATBIN/T_LONGG74 retractO--RW0 to 99.999
M_SSEC_BASEPRM_G76T_FLOATBIN/T_LONGG76 final cut-inO--RW0 to 99.999
M_SSEC_BASEPRM_G76CTT_CHARG76 number of timesO--RW0 to 99
M_SSEC_BASEPRM_G76ANT_CHARG76 thread angleO--RW0 to 99
M_SSEC_BASEPRM_P3DT_FLOATBIN/T_LONG3-dimensional compensationO--RW0 to 99999.999
M_SSEC_BASEPRM_SCALET_FLOATBIN/T_LONGScaling magnificationO--RW0 to 99.999999
M_SSEC_BASEPRM_SPIRAL_ERRT_FLOATBIN/T_LONGEnd point error in spiral Q and K incremental command (Type 2)O--RW0 to 99999.999
M_SSEC_BASEPRM_SCRN_TIMET_CHARScreen saver time----RW0 to 60
M_SSEC_BASEPRM_G83SMCODT_LONGG83 small diameter mode M codeO--RW1 to 99999999
M_SSEC_BASEPRM_G83SCLRNT_FLOATBIN/T_LONGG83 small diameter clearance amountO--RW0 to 999.999
M_SSEC_BASEPRM_G83SFWD_FT_LONGG83 small diameter cutting start position feedrateO--RW0 to 99999
M_SSEC_BASEPRM_G83SBAK_FT_LONGG83 small diameter retract speedO--RW0 to 99999
M_SSEC_BASEPRM_SSS_ONT_LONGSSS control enabledO--RW0,1
M_SSEC_BASEPRM_STDLENGTHT_FLOATBIN/T_LONGStandard lengthO--RW0.000 to 100.000
M_SSEC_BASEPRM_CLAMP_COEFFT_SHORTClamp speed coefficientO--RW1 to 100
M_SSEC_BASEPRM_STEP_LENGTHT_FLOATBIN/T_LONGStep lengthO--RW--0.001 to 0.100
M_SSEC_BASEPRM_DCC_WAIT_ADDT_CHARDeceleration wait timeO--RW0 to 100
M_SSEC_BASEPRM_MACSINGLET_LONGMacro single----RW0,1
M_SSEC_BASEPRM_COLLALMOFFT_LONGCollision avoidance----RW0,1
M_SSEC_BASEPRM_COLLCHKOFFT_LONGCollision invalid----RW0,1
M_SSEC_BASEPRM_EDTLCKBT_LONGEdit lock B----RW0,1
M_SSEC_BASEPRM_G46ERRT_LONGG46 reverse axis error avoidance----RW0,1
M_SSEC_BASEPRM_MCERRRADT_LONGRadius error compensation----RW0,1
M_SSEC_BASEPRM_CNGMCERRRADT_LONGRadius error compensation change----RW0,1
M_SSEC_BASEPRM_HOSTLNKT_CHARHost communication----RW0,1
M_SSEC_BASEPRM_POCKET_ONT_CHARG71/G72 pocket machining ON----RW0,1
M_SSEC_BASEPRM_MILL_RT_LONGMilling radius value designation----RW0,1
M_SSEC_BASEPRM_G04PT_LONGG04P decimal point valid----RW0,1
M_SSEC_BASEPRM_MILL_INIG16T_LONGMilling initial G16----RW0,1
M_SSEC_BASEPRM_MILL_INIG19T_LONGMilling initial G19----RW0,1
M_SSEC_BASEPRM_COORDOFFT_LONGCoordinate rotation parameter disabled----RW0,1
M_SSEC_BASEPRM_OFSDIAMT_LONGDiameter designation in radius compensation enabled----RW0,1
M_SSEC_BASEPRM_COMPUNITSWITCHT_LONGCompensation amount setting unit switch----RW0,1
M_SSEC_BASEPRM_SCRNCAPT_LONGScreen capture----RW0,1
M_SSEC_BASEPRM_KEEP_G43T_LONGKeep manual R return G43 (Only M system)----RW0,1
M_SSEC_BASEPRM_DRIL_QRT_LONGHigh-speed retract enabled----RW0,1
M_SSEC_BASEPRM_RST_MRT_LONGMirror operation at reset----RW0,1
M_SSEC_BASEPRM_UPRM_F1T_LONG#8145 F1-digit feet enabled----RW0,1
M_SSEC_BASEPRM_EXTDCC_AXT_LONGExternal deceleration axis support enabled----RW0,1
M_SSEC_BASEPRM_SUBPRO_INTERT_LONGSub-pro interrupt----RW0,1
M_SSEC_BASEPRM_FINE_THRECUT_ET_LONGFine thread cut E----RW0,1
M_SSEC_BASEPRM_COMP_TYPE_BT_LONGRadius comp type B (M system) / Nose R comp type B (L system)----RW0,1
M_SSEC_BASEPRM_INITCONST_SUR_SPDT_LONGInitial constant surface speed----RW0,1
M_SSEC_BASEPRM_SYNTAPT_LONGSynchronous tapping----RW0,1
M_SSEC_BASEPRM_STARTP_ALARMT_LONGStart point alarm----RW0,1
M_SSEC_BASEPRM_HOLD_INTR_AMOUNTT_LONGKeep interruption amountO--RW0,1
M_SSEC_BASEPRM_LKYOKOT_STRCoordinate rotation plane (Horizontal axis name)O-RWAxis name
M_SSEC_BASEPRM_LKTATET_STRCoordinate rotation plane (Vertical axis name)O-RWAxis name
M_SSEC_BASEPRM_LKCENTYT_FLOATBIN/T_LONGCoordinate rotation center coordinate (Horizontal axis)O-RW99999.999
M_SSEC_BASEPRM_LKSENTTT_FLOATBIN/T_LONGCoordinate rotation center coordinate (Vertical axis)O-RW99999.999
M_SSEC_MPSP_SP046T_SHORTSP046: Speed command dual cushion--ORW-32768 to 32767
M_SSEC_MPSP_SP047T_SHORTSP047: Speed detection reset value--ORW-32768 to 32767
M_SSEC_MPSP_SP048T_SHORTSP048: Speed reach range--ORW-32768 to 32767
M_SSEC_MPSP_SP049T_SHORTSP049: Torque limit 2--ORW-32768 to 32767
M_SSEC_MPSP_SP050T_SHORTSP050: Torque limit 3--ORW-32768 to 32767
M_SSEC_MPSP_SP051T_SHORTSP051: Torque limit 4 (Not used)--ORW-32768 to 32767
M_SSEC_MPSP_SP052T_SHORTSP052: Torque limit 5 (Not used)--ORW-32768 to 32767
M_SSEC_MPSP_SP053T_SHORTSP053: Torque limit 6 (Not used)--ORW-32768 to 32767
M_SSEC_MPSP_SP054T_SHORTSP054: Torque limit 7 (Not used)--ORW-32768 to 32767
M_SSEC_MPSP_SP055T_SHORTSP055: Excessive speed deviation timer--ORW-32768 to 32767
M_SSEC_MPSP_SP056T_SHORTSP056: Variable excitation (min value)--ORW-32768 to 32767
M_SSEC_MPSP_SP057T_SHORTSP057: Switch speed for excess--ORW-32768 to 32767
M_SSEC_MPSP_SP058T_SHORTSP058: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP059T_SHORTSP059: Coil switch base shut timer--ORW-32768 to 32767
M_SSEC_MPSP_SP060T_SHORTSP060: Current limit timer after coil switch--ORW-32768 to 32767
M_SSEC_MPSP_SP061T_SHORTSP061: Current limit value--ORW-32768 to 32767
M_SSEC_MPSP_SP062T_SHORTSP062: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP063T_SHORTSP063: Overload alarm detection time--ORW-32768 to 32767
M_SSEC_MPSP_SP064T_SHORTSP064: Overload alarm detection level--ORW-32768 to 32767
M_SSEC_MPSP_SP065T_SHORTSP065: Target value of variable speed loop proportional gain--ORW-32768 to 32767
M_SSEC_MPSP_SP066T_SHORTSP066: Change starting speed of variable speed loop proportional gain--ORW-32768 to 32767
M_SSEC_MPSP_SP067T_SHORTSP067: Change starting speed of variable current loop gain--ORW-32768 to 32767
M_SSEC_MPSP_SP068T_SHORTSP068: Change ending speed of variable current loop gain--ORW-32768 to 32767
M_SSEC_MPSP_SP069T_SHORTSP069: Target value of variable current loop gain--ORW-32768 to 32767
M_SSEC_MPSP_SP070T_SHORTSP070: Machine resonance suppression filter frequency--ORW-32768 to 32767
M_SSEC_MPSP_SP071T_SHORTSP071: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP072T_SHORTSP072: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP073T_SHORTSP073: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP074T_SHORTSP074: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP075T_SHORTSP075: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP076T_SHORTSP076: Machine resonance suppression filter performance speed--ORW-32768 to 32767
M_SSEC_MPSP_SP077T_SHORTSP077: Td time selection--ORW-32768 to 32767
M_SSEC_MPSP_SP078T_SHORTSP078: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP079T_SHORTSP079: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP080T_SHORTSP080: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP081T_SHORTSP081: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP082T_SHORTSP082: Fixed control constant--ORW-32768 to 32767
M_SSEC_MPSP_SP083T_SHORTSP083: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP084T_SHORTSP084: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP085T_SHORTSP085: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP086T_SHORTSP086: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP087T_SHORTSP087: Target value of variable torque limit magnification at deceleration--ORW-32768 to 32767
M_SSEC_MPSP_SP088T_SHORTSP088: Speed for starting change of variable torque limit magnification at deceleration--ORW-32768 to 32767
M_SSEC_MPSP_SP089T_SHORTSP089: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP090T_SHORTSP090: Deceleration detector pulse tolerable error value--ORW-32768 to 32767
M_SSEC_MPSP_SP091T_SHORTSP091: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP092T_SHORTSP092: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP093T_SHORTSP093: Position detector pulse tolerable error value--ORW-32768 to 32767
M_SSEC_MPSP_SP094T_SHORTSP094: Load meter output filter--ORW-32768 to 32767
M_SSEC_MPSP_SP095T_SHORTSP095: The average number of times of speed FB--ORW-32768 to 32767
M_SSEC_MPSP_SP096T_SHORTSP096: Encoder gear ratio--ORW-32768 to 32767
M_SSEC_MPSP_SP097T_SHORTSP097: Orientation specification--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP098T_SHORTSP098: Orientation-mode speed loop gain proportional term--ORW-32768 to 32767
M_SSEC_MPSP_SP099T_SHORTSP099: Orientation-mode speed loop gain integral time--ORW-32768 to 32767
M_SSEC_MPSP_SP100T_SHORTSP100: Orientation-mode speed loop gain delay lead term--ORW-32768 to 32767
M_SSEC_MPSP_SP101T_SHORTSP101: Orientation advance in-position width--ORW-32768 to 32767
M_SSEC_MPSP_SP102T_SHORTSP102: Excessive error value in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP103T_SHORTSP103: Index positioning completion OFF time timer--ORW-32768 to 32767
M_SSEC_MPSP_SP104T_SHORTSP104: Torque limit value for orientation servo locking--ORW-32768 to 32767
M_SSEC_MPSP_SP105T_SHORTSP105: Current loop gain magnification 1 in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP106T_SHORTSP106: Current loop gain magnification 2 in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP107T_SHORTSP107: Deceleration rate 2 in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP108T_SHORTSP108: Deceleration rate 3 in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP109T_SHORTSP109: Deceleration rate 4 in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP110T_SHORTSP110: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP111T_SHORTSP111: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP112T_SHORTSP112: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP113T_SHORTSP113: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP114T_SHORTSP114: Orientation pulse miss check value--ORW-32768 to 32767
M_SSEC_MPSP_SP115T_SHORTSP115: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP116T_SHORTSP116: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP117T_SHORTSP117: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP118T_SHORTSP118: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP119T_SHORTSP119: Position gain H coil compensation magnification in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP120T_SHORTSP120: Position gain L coil compensation magnification in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP121T_SHORTSP121: Deceleration rate H coil compensation magnification in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP122T_SHORTSP122: Deceleration rate L coil compensation magnification in orientation-mode--ORW-32768 to 32767
M_SSEC_MPSP_SP123T_SHORTSP123: Magnet detector output peak value--ORW-32768 to 32767
M_SSEC_MPSP_SP124T_SHORTSP124: Magnet detector linear zone width--ORW-32768 to 32767
M_SSEC_MPSP_SP125T_SHORTSP125: Magnet detector switch point--ORW-32768 to 32767
M_SSEC_MPSP_SP126T_SHORTSP126: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP127T_SHORTSP127: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP128T_SHORTSP128: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP129T_SHORTSP129: C axis specification--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP130T_SHORTSP130: 1st position loop gain during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP131T_SHORTSP131: 2nd position loop gain during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP132T_SHORTSP132: 3rd position loop gain during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP133T_SHORTSP133: Stop position loop gain during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP134T_SHORTSP134: Speed loop gain proportional item during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP135T_SHORTSP135: Speed loop gain integral item during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP136T_SHORTSP136: Speed loop gain delay lead item during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP137T_SHORTSP137: 1st speed loop gain proportional item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP138T_SHORTSP138: 1st speed loop gain integral item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP139T_SHORTSP139: 1st speed loop gain delay lead item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP140T_SHORTSP140: 2nd speed loop gain proportional item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP141T_SHORTSP141: 2nd speed loop gain integral item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP142T_SHORTSP142: 2nd speed loop gain delay lead item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP143T_SHORTSP143: 3rd speed loop gain proportional item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP144T_SHORTSP144: 3rd speed loop gain integral item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP145T_SHORTSP145: 3rd speed loop gain delay lead item during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP146T_SHORTSP146: Speed loop gain proportional item for stop during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP147T_SHORTSP147: Speed loop gain integral item for stop during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP148T_SHORTSP148: Speed loop gain delay lead item for stop during C axis cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP149T_SHORTSP149: C axis reference position speed--ORW-32768 to 32767
M_SSEC_MPSP_SP150T_SHORTSP150: C axis reference position deceleration point--ORW-32768 to 32767
M_SSEC_MPSP_SP151T_SHORTSP151: C axis reference position return shift amount (low byte)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP152T_SHORTSP152: C axis reference position return shift amount (high byte)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP153T_SHORTSP153: C axis in-position width--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP154T_SHORTSP154: Excessive error width on C axis (low byte)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP155T_SHORTSP155: Excessive error width on C axis (high byte)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP156T_SHORTSP156: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP157T_SHORTSP157: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP158T_SHORTSP158: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP159T_SHORTSP159: Variable excitation ratio during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP160T_SHORTSP160: Variable excitation ratio during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP161T_SHORTSP161: Current loop gain magnification 1 during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP162T_SHORTSP162: Current loop gain magnification 2 during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP163T_SHORTSP163: Current loop gain magnification 1 during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP164T_SHORTSP164: Current loop gain magnification 2 during C axis not cutting--ORW-32768 to 32767
M_SSEC_MPSP_SP165T_SHORTSP165: C axis position loop gain 2--ORW-32768 to 32767
M_SSEC_MPSP_SP166T_SHORTSP166: C axis position loop gain 3--ORW-32768 to 32767
M_SSEC_MPSP_SP167T_SHORTSP167: Position loop gain for increased spindle holding force--ORW-32768 to 32767
M_SSEC_MPSP_SP168T_SHORTSP168: Speed loop gain proportional term for increased spindle holding force--ORW-32768 to 32767
M_SSEC_MPSP_SP169T_SHORTSP169: Speed loop gain integral item for increased spindle holding force--ORW-32768 to 32767
M_SSEC_MPSP_SP170T_SHORTSP170: Speed loop gain delay lead item for increased spindle holding force--ORW-32768 to 32767
M_SSEC_MPSP_SP171T_SHORTSP171: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP172T_SHORTSP172: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP173T_SHORTSP173: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP174T_SHORTSP174: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP175T_SHORTSP175: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP176T_SHORTSP176: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP177T_SHORTSP177: Spindle synchronization specification--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP178T_SHORTSP178: Spindle synchronization speed loop gain proportional term--ORW-32768 to 32767
M_SSEC_MPSP_SP179T_SHORTSP179: Spindle synchronization speed loop gain integral term--ORW-32768 to 32767
M_SSEC_MPSP_SP180T_SHORTSP180: Spindle synchronization speed loop gain delay lead term--ORW-32768 to 32767
M_SSEC_MPSP_SP181T_SHORTSP181: Spindle synchronization target value of variable speed loop proportional gain--ORW-32768 to 32767
M_SSEC_MPSP_SP182T_SHORTSP182: Spindle synchronization change starting speed of variable speed loop proportional gain--ORW-32768 to 32767
M_SSEC_MPSP_SP183T_SHORTSP183: Spindle synchronization sync matching speed--ORW-32768 to 32767
M_SSEC_MPSP_SP184T_SHORTSP184: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP185T_SHORTSP185: Spindle synchronization in-position width--ORW-32768 to 32767
M_SSEC_MPSP_SP186T_SHORTSP186: Spindle synchronization excessive error value--ORW-32768 to 32767
M_SSEC_MPSP_SP187T_SHORTSP187: Spindle synchronization current loop gain magnification 1--ORW-32768 to 32767
M_SSEC_MPSP_SP188T_SHORTSP188: Spindle synchronization current loop gain magnification 2--ORW-32768 to 32767
M_SSEC_MPSP_SP189T_SHORTSP189: Spindle synchronization position loop gain 2--ORW-32768 to 32767
M_SSEC_MPSP_SP190T_SHORTSP190: Spindle synchronization position loop gain 3--ORW-32768 to 32767
M_SSEC_MPSP_SP191T_SHORTSP191: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP192T_SHORTSP192: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP193T_SHORTSP193: Synchronized tapping specification--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP194T_SHORTSP194: Synchronized tapping speed loop gain proportional term--ORW-32768 to 32767
M_SSEC_MPSP_SP195T_SHORTSP195: Synchronized tapping speed loop gain integral term--ORW-32768 to 32767
M_SSEC_MPSP_SP196T_SHORTSP196: Synchronized tapping speed loop gain delay lead term--ORW-32768 to 32767
M_SSEC_MPSP_SP197T_SHORTSP197: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP198T_SHORTSP198: Synchronized tapping target value of variable speed loop proportional gain--ORW-32768 to 32767
M_SSEC_MPSP_SP199T_SHORTSP199: Synchronized tapping change starting speed of variable speed loop proportional gain--ORW-32768 to 32767
M_SSEC_MPSP_SP200T_SHORTSP200: Synchronized tapping acceleration feed forward gain (gear 1)--ORW-32768 to 32767
M_SSEC_MPSP_SP201T_SHORTSP201: Synchronized tapping acceleration feed forward gain (gear 2)--ORW-32768 to 32767
M_SSEC_MPSP_SP202T_SHORTSP202: Synchronized tapping acceleration feed forward gain (gear 3)--ORW-32768 to 32767
M_SSEC_MPSP_SP203T_SHORTSP203: Synchronized tapping acceleration feed forward gain (gear 4)--ORW-32768 to 32767
M_SSEC_MPSP_SP204T_SHORTSP204: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP205T_SHORTSP205: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP206T_SHORTSP206: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP207T_SHORTSP207: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP208T_SHORTSP208: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP209T_SHORTSP209: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP210T_SHORTSP210: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP211T_SHORTSP211: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP212T_SHORTSP212: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP213T_SHORTSP213: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP214T_SHORTSP214: Synchronized tapping reference position return speed--ORW-32768 to 32767
M_SSEC_MPSP_SP215T_SHORTSP215: Synchronized tapping reference position return deceleration point--ORW-32768 to 32767
M_SSEC_MPSP_SP216T_SHORTSP216: Synchronized tapping reference position return shift amount--ORW-32768 to 32767
M_SSEC_MPSP_SP217T_SHORTSP217: Synchronized tapping in-position width--ORW-32768 to 32767
M_SSEC_MPSP_SP218T_SHORTSP218: Synchronized tapping excessive error value--ORW-32768 to 32767
M_SSEC_MPSP_SP219T_SHORTSP219: Synchronized tapping current loop gain magnification 1--ORW-32768 to 32767
M_SSEC_MPSP_SP220T_SHORTSP220: Synchronized tapping current loop gain magnification 2--ORW-32768 to 32767
M_SSEC_MPSP_SP221T_SHORTSP221: Synchronized tapping position loop gain 2--ORW-32768 to 32767
M_SSEC_MPSP_SP222T_SHORTSP222: Synchronized tapping position loop gain 3--ORW-32768 to 32767
M_SSEC_MPSP_SP223T_SHORTSP223: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP224T_SHORTSP224: Not used--ORW-32768 to 32767
M_SSEC_BASEPRM_LKYOKOLT_FLOATBIN/T_LONGCoordinate rotation vector (Horizontal axis)O-RW99999.999
M_SSEC_BASEPRM_LKTATELT_FLOATBIN/T_LONGCoordinate rotation vector (Vertical axis)O-RW99999.999
M_SSEC_BASEPRM_LKKAKUDOT_DOUBLECoordinate rotation angleO-RW360.000
M_SSEC_BASEPRM_TOOL_LENT_FLOATBIN/T_LONGTool lengthO--RW99999.999
M_SSEC_BASEPRM_TOOL_DIAT_FLOATBIN/T_LONGTool diameterO--RW99999.999
M_SSEC_BASEPRM_OFFSET_XT_FLOATBIN/T_LONGCentre offset amount XO--RW99999.999
M_SSEC_BASEPRM_OFFSET_YT_FLOATBIN/T_LONGCentre offset amount YO--RW99999.999
M_SSEC_BASEPRM_RETURNT_FLOATBIN/T_LONGReturn amountO--RW0 to 99999.999
M_SSEC_BASEPRM_FEEDT_LONGFeedrateO--RW1 to 60000
M_SSEC_BASEPRM_SKIP_PAST_HT_FLOATBIN/T_LONGSkip past amount (Horizontal axis)O--RW99999.999
M_SSEC_BASEPRM_SKIP_PAST_VT_FLOATBIN/T_LONGSkip past amount (Vertical axis)O--RW99999.999
M_SSEC_BASEPRM_WORK_SIN_CHGT_CHARExternal workpiece sign reverseO--RW0,1
M_SSEC_BASEPRM_WORK_INVAT_CHARExternal workpiece offset invalidO--RW0,1
M_SSEC_BASEPRM_TLM_L_MEAS_AXIST_STRTool length measure axisO--RW2 letters (1st letter is 'A' to 'Z', 2nd letter is 'A' to 'Z','0' to '9')
M_SSEC_BASEPRM_TLM_M_MEAS_AXIST_STRTool diameter measure axisO--RW2 letters (1st letter is 'A' to 'Z', 2nd letter is 'A' to 'Z','0' to '9')
M_SSEC_BASEPRM_D0DEVT_STRSub-pro storage destination D0:dev----RWithin 4 letters (5 letters including NULL which follows ": ")
M_SSEC_BASEPRM_D0DIRT_STRSub-pro storage destination D0:dir----RWithin 55 letters (56 letters including NULL)
M_SSEC_BASEPRM_D1DEVT_STRSub-pro storage destination D1:dev----RWithin 4 letters (5 letters including NULL which follows ": ")
M_SSEC_BASEPRM_D1DIRT_STRSub-pro storage destination D1:dir----RWithin 55 letters (56 letters including NULL)
M_SSEC_BASEPRM_D2DEVT_STRSub-pro storage destination D2:dev----RWithin 4 letters (5 letters including NULL which follows ": ")
M_SSEC_BASEPRM_D2DIRT_STRSub-pro storage destination D2:dir----RWithin 55 letters (56 letters including NULL)
M_SSEC_BASEPRM_D3DEVT_STRSub-pro storage destination D3:dev----RWithin 4 letters (5 letters including NULL which follows ": ")
M_SSEC_BASEPRM_D3DIRT_STRSub-pro storage destination D3:dir----RWithin 55 letters (56 letters including NULL)
M_SSEC_BASEPRM_D4DEVT_STRSub-pro storage destination D4:dev----RWithin 4 letters (5 letters including NULL which follows ": ")
M_SSEC_BASEPRM_D4DIRT_STRSub-pro storage destination D4:dir----RWithin 55 letters (56 letters including NULL)
M_SSEC_BASEPRM_G_CODE_FORMATT_LONGG code format----RW0 to 2
M_SSEC_BASEPRM_M2_LABEL_OT_LONGM2 label O----RW0,1
M_SSEC_BASEPRM_M2_MACRO_CONVERTT_LONGM2 macro converter enabled----RW0,1
M_SSEC_BASEPRM_COORD_ANGLCoordinate rotation angle
M_SSEC_BASEPRM_COORD_ROT_CENTER_HT_FLOATBIN/T_LONGCoordinate rotation centre coordinate (H)O--RW99999.999
M_SSEC_BASEPRM_COORD_ROT_CENTER_VT_FLOATBIN/T_LONGCoordinate rotation centre coordinate (V)O--RW99999.999
M_SSEC_BASEPRM_PASSWDT_LONGMachine tool builder macro password----RW2 to 99999999
M_SSEC_BASEPRM_M3MPAR1T_CHARParameter for M3/L3 (m3mpar1)----RW0x00 to 0xFF
M_SSEC_BASEPRM_OPERAT1T_CHARoperat1----RW0x00 to 0xFF
M_SSEC_BASEPRM_OPERAT2T_CHARoperat2----RW0x00 to 0xFF
M_SSEC_BASEPRM_OPERAT3T_CHARoperat3----RW0x00 to 0xFF
M_SSEC_BASEPRM_OPERAT5T_CHARoperat5----RW0x00 to 0xFF
M_SSEC_BASEPRM_OPERAT7T_CHARoperat7----RW0x00 to 0xFF
M_SSEC_BASEPRM_MASMAC5T_CHARmasmac5----RW0x00 to 0xFF
M_SSEC_BASEPRM_CHRCOMPT_FLOATBIN/T_LONGRelative error after conversion and before interpolation (Determined by #8019)O--R-99.999
M_SSEC_BASEPRM_CHRCOMP2T_FLOATBIN/T_LONGRelative error after conversion and before interpolation in corner accuracy factor (Determined by #8023)O--R-999999.999
M_SSEC_BASEPRM_APC_TYPET_CHARAPC screen display type selection----RW0: Standard, 1: Pallet 4-page registration
M_SSEC_BASEPRM_VALID_PALLET_NUMT_CHARNumber of pallets setting----RW2 to 12
M_SSEC_BASEPRM_APLCT_CHARAPLC enabled/disabled (APLC enabled)----RW0,1
M_SSEC_BASEPRM_PLCAUTOT_CHARPLC start timing selection (PLCautorun enabled)----RW0,1
M_SSEC_BASEPRM_HD_IPADDRT_STRIP address of the PC in which machining programs are stored----RW0.0.0.0 to 255.255.255.255
M_SSEC_BASEPRM_HD_PORTNUMBERT_LONGPort No. of the PC in which machining programs are stored----RW0 to 65535
M_SSEC_BASEPRM_HD_TIMEOUTT_SHORTTime out setting of the PC in which machining programs are stored----RW0 to 300
M_SSEC_BASEPRM_HD_CACHET_SHORTCache setting fo HD operation--RW0 to 1024
M_SSEC_BASEPRM_SW_KEYBOARDT_CHARSoftware keyboard--RW0,1
M_SSEC_BASEPRM_HANDYTERMINAL_PWT_STRHandy terminal password--RWBlank or 4-digit numeric
M_SSEC_BASEPRM_AX16MDT_CHARConnecting 16 axes for 1ch--RW0,1
M_SSEC_BASEPRM_3D_MCHKT_CHAR3D machine collision check disabled--RW0,1
M_SSEC_BASEPRM_CHK_LEN1T_FLOATBIN1st-step collision check distance--RW0.000 to 99999.999(mm)
M_SSEC_BASEPRM_CHK_LEN2T_FLOATBIN2nd-step collision check distance--RW0.000 to 99999.999(mm)
M_SSEC_BASEPRM_EXPAND_RATET_SHORT3D machine collision check shape expansion rate--RW0 to 300(%)
M_SSEC_BASEPRM_TOFS_RUNNINGT_CHARTool compensation amount setting during automatic operation enabled (T-ofs set at run)--RW0,1
M_SSEC_BASEPRM_M_PW_HOLDT_CHARMachine user password hold--RW0,1
M_SSEC_BASEPRM_2SYS_DISPLAYT_CHAR2-part system simultaneous display--RW0,1
M_SSEC_BASEPRM_PLC_MESG_TYPET_CHARFormat of PLC alarm and operator message (PLC mesg disp type)--RW0,1
M_SSEC_BASEPRM_G33_1_DRNT_LONGG33.1 Dry run--RW0,1
M_SSEC_BASEPRM_G33_1_FHDT_LONGG33.1 Feed hold--RW0,1
M_SSEC_BASEPRM_TOLE_ARC_CENTT_FLOATBIN/T_DOUBLETolerable correction value of arc center error--RW-1.000 to 0.100
M_SSEC_BASEPRM_ARC_TO_G1T_UCHARChange command from arc to linear when no arc center designation--RW0,1
M_SSEC_BASEPRM_MANTAPSYNCCANCLT_UCHARSynchronization cancel during manual synchronous tapping---RW0,1
M_SSEC_BASEPRM_CURSOR_POS_SRCHT_CHARCursor position search--RW0 to 2
M_SSEC_BASEPRM_MBTANAXHT_STRManual feed rate B constant surface control intersecting part system axis name (horizontal)O-RW2 digits
M_SSEC_BASEPRM_MBTANAXVT_STRManual feed rate B constant surface control intersecting part system axis name (vertical)O-RW2 digits
M_SSEC_BASEPRM_MBROTCHT_FLOATBIN/T_DOUBLEManual feed rate B constant surface control rotation center machine position (horizontal)O-RW-99999.999 to 99999.999
M_SSEC_BASEPRM_MBROTCVT_FLOATBIN/T_DOUBLEManual feed rate B constant surface control rotation center machine position (vertical)O-RW-99999.999 to 99999.999
M_SSEC_BASEPRM_MFIGT_CHARNumber of MO-RW1 to 4
M_SSEC_BASEPRM_MBINT_CHARM binaryO-RW-1/0/1
M_SSEC_BASEPRM_SFIGT_CHARNumber of SO-RW1 to 4
M_SSEC_BASEPRM_SBINT_CHARS binaryO-RW-1/0/1
M_SSEC_BASEPRM_TFIGT_CHARNumber of TO-RW1 to 4
M_SSEC_BASEPRM_TBINT_CHART binaryO-RW-1/0/1
M_SSEC_BASEPRM_BFIGT_CHARNumber of BO-RW1 to 4
M_SSEC_BASEPRM_BBINT_CHARB binaryO-RW-1/0/1
M_SSEC_BASEPRM_G33_1_ROT_NAMET_STRG33.1 Rotary axis nameO-RWA to Z
M_SSEC_BASEPRM_G33_1_OVRT_SHORTG33.1 OverrideO-RW0 to 6
M_SSEC_BASEPRM_SYNTAP_SCANCELT_LONGSynchronous tapping (,S) cancel---RW0,1
M_SSEC_BASEPRM_ZEROPOINT_MARKT_LONGDisplay position of zero point mark---RW0,1
M_SSEC_BASEPRM_PRGCRDROT_TYPET_LONGPRG coordinate rotation type---RW0,1
M_SSEC_BASEPRM_G33_1_CUTUP_SPDT_LONGG33.1 Chamfering speedO-RW1 to 1000000
M_SSEC_BASEPRM_MBRSTDR1T_FLOATBIN/T_DOUBLESurface speed control standard radius 1O-RW0 to 99999.999
M_SSEC_BASEPRM_MBRSTDF1T_DOUBLESurface speed control standard speed 1O-RW1 to 1000000
M_SSEC_BASEPRM_MBRSTDR2T_FLOATBIN/T_DOUBLESurface speed control standard radius 2O-RW0 to 99999.999
M_SSEC_BASEPRM_MBRSTDF2T_DOUBLESurface speed control standard speed 2O-RW1 to 1000000
M_SSEC_UPBARI_BARI3ZT_FLOATBIN/T_LONGP3 Z----RW99999.999
M_SSEC_UPBARI_BARI4XT_FLOATBIN/T_LONGP4 X----RW99999.999
M_SSEC_UPBARI_BARI4ZT_FLOATBIN/T_LONGP4 Z----RW99999.999
M_SSEC_UPBARI_BARI5XT_FLOATBIN/T_LONGP5 X----RW99999.999
M_SSEC_UPBARI_BARI5ZT_FLOATBIN/T_LONGP5 Z----RW99999.999
M_SSEC_UPBARI_BARI6XT_FLOATBIN/T_LONGP6 X----RW99999.999
M_SSEC_UPBARI_BARI6ZT_FLOATBIN/T_LONGP6 Z----RW99999.999
M_SSEC_UPBARI_BARI_ONT_CHARBarrier ONO--RW0,1
M_SSEC_UPBARI_BARI7XT_FLOATBIN/T_LONGP7 XO--RW99999.999
M_SSEC_UPBARI_BARI8XT_FLOATBIN/T_LONGP8 XO--RW99999.999
M_SSEC_UPBARI_BARI8ZT_FLOATBIN/T_LONGP8 ZO--RW99999.999
M_SSEC_UPBARI_BARI9XT_FLOATBIN/T_LONGP9 XO--RW99999.999
M_SSEC_UPBARI_BARI10XT_FLOATBIN/T_LONGP10 XO--RW99999.999
M_SSEC_UPBARI_BARI10ZT_FLOATBIN/T_LONGP10 ZO--RW99999.999
M_SSEC_UPBARI_BRFORMLT_CHARBarrier type (Left)O--RW0 to 2
M_SSEC_UPBARI_BRFORMRT_CHARBarrier type (Right)O--RW0 to 2
M_SSEC_UPBARI_BARI_SCT_STRDelivery axis nameO--RWAxis name
M_SSEC_UPBARI_TAIL_ALT_SHORTTail stock angle (Left)O--RW0 to 180
M_SSEC_UPBARI_TAIL_ART_SHORTTail stock angle (Right)O--RW0 to 180
M_SSEC_PLCINDXPRM_TL2T_SHORTOperation parameter group 2 Torque limit value-ORW0 to 500
M_SSEC_PLCINDXPRM_OD2T_SHORTOperation parameter group 2 Excessive error detection width-ORW0 to 32767
M_SSEC_PLCINDXPRM_JUST2T_FLOATBINOperation parameter group 2 Set position output width-ORW0 to 99999.999
M_SSEC_PLCINDXPRM_NEAR2T_FLOATBINOperation parameter group 2 Near set position output width-ORW0 to 99999.999
M_SSEC_PLCINDXPRM_SMGST2T_SHORTOperation parameter group 2 Acceleration/deceleration type-ORW0x01,0x0F
M_SSEC_PLCINDXPRM_ASPEED3T_LONGOperation parameter group 3 Automatic operation speed-ORW1 to 100000
M_SSEC_PLCINDXPRM_MSPEED3T_LONGOperation parameter group 3 Manual operation speed-ORW1 to 100000
M_SSEC_PLCINDXPRM_TIMEL3_1T_SHORTOperation parameter group 3 Acceleration/deceleration time constant 1-ORW1 to 9999
M_SSEC_PLCINDXPRM_TIMEL3_2T_SHORTOperation parameter group 3 Acceleration/deceleration time constant 2-ORW1 to 999
M_SSEC_PLCINDXPRM_TL3T_SHORTOperation parameter group 3 Torque limit value-ORW0 to 500
M_SSEC_PLCINDXPRM_OD3T_SHORTOperation parameter group 3 Excessive error detection width-ORW0 to 32767
M_SSEC_PLCINDXPRM_JUST3T_FLOATBINOperation parameter group 3 Set position output width-ORW0 to 99999.999
M_SSEC_PLCINDXPRM_NEAR3T_FLOATBINOperation parameter group 3 Near set position output width-ORW0 to 99999.999
M_SSEC_PLCINDXPRM_SMGST3T_SHORTOperation parameter group 3 Acceleration/deceleration type-ORW0x01,0x0F
M_SSEC_PLCINDXPRM_ASPEED4T_LONGOperation parameter group 4 Automatic operation speed-ORW1 to 100000
M_SSEC_PLCINDXPRM_MSPEED4T_LONGOperation parameter group 4 Manual operation speed-ORW1 to 100000
M_SSEC_PLCINDXPRM_TIMEL4_1T_SHORTOperation parameter group 4 Acceleration/deceleration time constant 1-ORW1 to 9999
M_SSEC_PLCINDXPRM_TIMEL4_2T_SHORTOperation parameter group 4 Acceleration/deceleration time constant 2-ORW1 to 999
M_SSEC_PLCINDXPRM_TL4T_SHORTOperation parameter group 4 Torque limit value-ORW0 to 500
M_SSEC_PLCINDXPRM_OD4T_SHORTOperation parameter group 4 Excessive error detection width-ORW0 to 32767
M_SSEC_PLCINDXPRM_JUST4T_FLOATBINOperation parameter group 4 Set position output width-ORW0 to 99999.999
M_SSEC_PLCINDXPRM_NEAR4T_FLOATBINOperation parameter group 4 Near set position output width-ORW0 to 99999.999
M_SSEC_PLCINDXPRM_SMGST4T_SHORTOperation parameter group 4 Acceleration/deceleration type-ORW0x01,0x0F
M_SSEC_PLCINDXPRM_STPOS2T_FLOATBINStation 2 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS3T_FLOATBINStation 3 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS4T_FLOATBINStation 4 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS5T_FLOATBINStation 5 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS6T_FLOATBINStation 6 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS7T_FLOATBINStation 7 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS8T_FLOATBINStation 8 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS9T_FLOATBINStation 9 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS10T_FLOATBINStation 10 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS11T_FLOATBINStation 11 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS12T_FLOATBINStation 12 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS13T_FLOATBINStation 13 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS14T_FLOATBINStation 14 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS15T_FLOATBINStation 15 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS16T_FLOATBINStation 16 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS17T_FLOATBINStation 17 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS18T_FLOATBINStation 18 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS19T_FLOATBINStation 19 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_STPOS20T_FLOATBINStation 20 coordinate value-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSWCHECKT_CHARPSW detection method-ORW0 to 0xFF
M_SSEC_PLCINDXPRM_PSW1DOG1T_FLOATBINPSW1 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW1DOG2T_FLOATBINPSW1 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW2DOG1T_FLOATBINPSW2 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW2DOG2T_FLOATBINPSW2 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW3DOG1T_FLOATBINPSW3 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW3DOG2T_FLOATBINPSW3 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW4DOG1T_FLOATBINPSW4 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW4DOG2T_FLOATBINPSW4 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW5DOG1T_FLOATBINPSW5 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW5DOG2T_FLOATBINPSW5 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW6DOG1T_FLOATBINPSW6 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW6DOG2T_FLOATBINPSW6 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW7DOG1T_FLOATBINPSW7 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW7DOG2T_FLOATBINPSW7 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW8DOG1T_FLOATBINPSW8 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW8DOG2T_FLOATBINPSW8 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW9DOG1T_FLOATBINPSW9 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW9DOG2T_FLOATBINPSW9 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW10DOG1T_FLOATBINPSW10 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW10DOG2T_FLOATBINPSW10 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW11DOG1T_FLOATBINPSW11 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW11DOG2T_FLOATBINPSW11 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW12DOG1T_FLOATBINPSW12 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW12DOG2T_FLOATBINPSW12 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW13DOG1T_FLOATBINPSW13 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_MPSP_SP225T_SHORTSP225: Spindle gear teeth count 5--ORW-32768 to 32767
M_SSEC_MPSP_SP226T_SHORTSP226: Spindle gear teeth count 6--ORW-32768 to 32767
M_SSEC_MPSP_SP227T_SHORTSP227: Spindle gear teeth count 7--ORW-32768 to 32767
M_SSEC_MPSP_SP228T_SHORTSP228: Spindle gear teeth count 8--ORW-32768 to 32767
M_SSEC_MPSP_SP229T_SHORTSP229: Motor shaft gear teeth count 5--ORW-32768 to 32767
M_SSEC_MPSP_SP230T_SHORTSP230: Motor shaft gear teeth count 6--ORW-32768 to 32767
M_SSEC_MPSP_SP231T_SHORTSP231: Motor shaft gear teeth count 7--ORW-32768 to 32767
M_SSEC_MPSP_SP232T_SHORTSP232: Motor shaft gear teeth count 8--ORW-32768 to 32767
M_SSEC_MPSP_SP233T_SHORTSP233: Disturbance observer general inertia scale--ORW-32768 to 32767
M_SSEC_MPSP_SP234T_SHORTSP234: Disturbance observer low path filter frequency--ORW-32768 to 32767
M_SSEC_MPSP_SP235T_SHORTSP235: Disturbance observer gain--ORW-32768 to 32767
M_SSEC_MPSP_SP236T_SHORTSP236: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP237T_SHORTSP237: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP238T_SHORTSP238: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP239T_SHORTSP239: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP240T_SHORTSP240: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP241T_SHORTSP241: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP242T_SHORTSP242: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP243T_SHORTSP243: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP244T_SHORTSP244: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP245T_SHORTSP245: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP246T_SHORTSP246: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP247T_SHORTSP247: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP248T_SHORTSP248: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP249T_SHORTSP249: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP250T_SHORTSP250: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP251T_SHORTSP251: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP252T_SHORTSP252: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP253T_SHORTSP253: D/A output channel 1 data number--ORW-32768 to 32767
M_SSEC_MPSP_SP254T_SHORTSP254: D/A output channel 2 data number--ORW-32768 to 32767
M_SSEC_MPSP_SP255T_SHORTSP255: D/A output channel 3 data number--ORW-32768 to 32767
M_SSEC_MPSP_SP256T_SHORTSP256: D/A output channel 4 data number--ORW-32768 to 32767
M_SSEC_MPSP_SP257T_SHORTSP257: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP258T_SHORTSP258: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP259T_SHORTSP259: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP260T_SHORTSP260: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP261T_SHORTSP261: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP262T_SHORTSP262: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP263T_SHORTSP263: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP264T_SHORTSP264: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP265T_SHORTSP265: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP266T_SHORTSP266: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP267T_SHORTSP267: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP268T_SHORTSP268: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP269T_SHORTSP269: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP270T_SHORTSP270: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP271T_SHORTSP271: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP272T_SHORTSP272: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP273T_SHORTSP273: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP274T_SHORTSP274: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP275T_SHORTSP275: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP276T_SHORTSP276: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP277T_SHORTSP277: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP278T_SHORTSP278: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP279T_SHORTSP279: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP280T_SHORTSP280: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP281T_SHORTSP281: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP282T_SHORTSP282: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP283T_SHORTSP283: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP284T_SHORTSP284: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP285T_SHORTSP285: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP286T_SHORTSP286: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP287T_SHORTSP287: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP288T_SHORTSP288: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP289T_SHORTSP289: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP290T_SHORTSP290: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP291T_SHORTSP291: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP292T_SHORTSP292: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP293T_SHORTSP293: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP294T_SHORTSP294: Disturbance observer torque constant--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP295T_SHORTSP295: Disturbance observer motor inertia--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP296T_SHORTSP296: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP297T_SHORTSP297: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP298T_SHORTSP298: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP299T_SHORTSP299: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP300T_SHORTSP300: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP301T_SHORTSP301: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP302T_SHORTSP302: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP303T_SHORTSP303: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP304T_SHORTSP304: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP305T_SHORTSP305: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP306T_SHORTSP306: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP307T_SHORTSP307: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP308T_SHORTSP308: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP309T_SHORTSP309: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP310T_SHORTSP310: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP311T_SHORTSP311: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP312T_SHORTSP312: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP313T_SHORTSP313: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP314T_SHORTSP314: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP315T_SHORTSP315: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP316T_SHORTSP316: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP317T_SHORTSP317: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP318T_SHORTSP318: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP319T_SHORTSP319: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP320T_SHORTSP320: Motor constant (H coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP321T_SHORTSP321: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP322T_SHORTSP322: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP323T_SHORTSP323: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP324T_SHORTSP324: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP325T_SHORTSP325: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP326T_SHORTSP326: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP327T_SHORTSP327: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP328T_SHORTSP328: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP329T_SHORTSP329: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP330T_SHORTSP330: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP331T_SHORTSP331: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP332T_SHORTSP332: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP333T_SHORTSP333: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP334T_SHORTSP334: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP335T_SHORTSP335: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP336T_SHORTSP336: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP337T_SHORTSP337: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP338T_SHORTSP338: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP339T_SHORTSP339: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP340T_SHORTSP340: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP341T_SHORTSP341: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP342T_SHORTSP342: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP343T_SHORTSP343: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP344T_SHORTSP344: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP345T_SHORTSP345: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP346T_SHORTSP346: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP347T_SHORTSP347: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP348T_SHORTSP348: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP349T_SHORTSP349: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP350T_SHORTSP350: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP351T_SHORTSP351: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP352T_SHORTSP352: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP353T_SHORTSP353: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP354T_SHORTSP354: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP355T_SHORTSP355: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP356T_SHORTSP356: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP357T_SHORTSP357: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP358T_SHORTSP358: Disturbance observer torque constant 2--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP359T_SHORTSP359: Disturbance observer motor inertia 2--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP360T_SHORTSP360: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP361T_SHORTSP361: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP362T_SHORTSP362: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP363T_SHORTSP363: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP364T_SHORTSP364: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP365T_SHORTSP365: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP366T_SHORTSP366: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP367T_SHORTSP367: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP368T_SHORTSP368: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP369T_SHORTSP369: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP370T_SHORTSP370: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP371T_SHORTSP371: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP372T_SHORTSP372: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP373T_SHORTSP373: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP374T_SHORTSP374: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP375T_SHORTSP375: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP376T_SHORTSP376: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP377T_SHORTSP377: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP378T_SHORTSP378: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP379T_SHORTSP379: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP380T_SHORTSP380: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP381T_SHORTSP381: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP382T_SHORTSP382: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP383T_SHORTSP383: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP384T_SHORTSP384: Motor constant (L coil)--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP1001T_SHORTSP1001: Position gain normal--ORW-32768 to 32767
M_SSEC_MPSP_SP1002T_SHORTSP1002: Position gain in spindle synchronization--ORW-32768 to 32767
M_SSEC_MPSP_SP1003T_SHORTSP1003: Position gain in C axis--ORW-32768 to 32767
M_SSEC_MPSP_SP1004T_SHORTSP1004: Position gain in in synchronous tapping--ORW-32768 to 32767
M_SSEC_MPSP_SP1005T_SHORTSP1005: Speed gain 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1006T_SHORTSP1006: Speed lead compensation 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1007T_SHORTSP1007: Speed delay compensation 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1008T_SHORTSP1008: Speed gain 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1009T_SHORTSP1009: Speed lead compensation 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1010T_SHORTSP1010: Speed delay compensation 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1011T_SHORTSP1011: Variable current gain starting speed--ORW-32768 to 32767
M_SSEC_MPSP_SP1012T_SHORTSP1012: Variable current gain finishing speed--ORW-32768 to 32767
M_SSEC_MPSP_SP1013T_SHORTSP1013: Variable current gain scale--ORW-32768 to 32767
M_SSEC_MPSP_SP1014T_SHORTSP1014: Minimum excitation rate 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1015T_SHORTSP1015: Minimum excitation rate 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1016T_SHORTSP1016: Phase compensation time constant--ORW-32768 to 32767
M_SSEC_MPSP_SP1017T_SHORTSP1017: Spindle specification 1--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP1018T_SHORTSP1018: Spindle specification 2--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP1019T_SHORTSP1019: Position encoder resolution (Spindle end)--ORW-32768 to 32767
M_SSEC_MPSP_SP1020T_SHORTSP1020: Speed encoder resolution (Motor end)--ORW-32768 to 32767
M_SSEC_MPSP_SP1021T_SHORTSP1021: Overload alarm detection time--ORW-32768 to 32767
M_SSEC_MPSP_SP1022T_SHORTSP1022: Overload alarm detection level--ORW-32768 to 32767
M_SSEC_MPSP_SP1023T_SHORTSP1023: Excessive error detection width (Position mode)--ORW-32768 to 32767
M_SSEC_MPSP_SP1024T_SHORTSP1024: In-position width--ORW-32768 to 32767
M_SSEC_MPSP_SP1025T_SHORTSP1025: 2nd in-position width--ORW-32768 to 32767
M_SSEC_MPSP_SP1026T_SHORTSP1026: Motor maximum speed--ORW-32768 to 32767
M_SSEC_MPSP_SP1027T_SHORTSP1027: Motor zero speed--ORW-32768 to 32767
M_SSEC_MPSP_SP1028T_SHORTSP1028: Speed detection setting value--ORW-32768 to 32767
M_SSEC_MPSP_SP1029T_SHORTSP1029: Speed detection reset width--ORW-32768 to 32767
M_SSEC_MPSP_SP1030T_SHORTSP1030: 2nd speed detection setting value--ORW-32768 to 32767
M_SSEC_MPSP_SP1031T_SHORTSP1031: Motor type--ORW-32768 to 32767
M_SSEC_MPSP_SP1032T_SHORTSP1032: Power supply type--ORW-32768 to 32767
M_SSEC_MPSP_SP1033T_SHORTSP1033: Spindle function 1--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP1034T_SHORTSP1034: Spindle function 2--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP1035T_SHORTSP1035: Spindle function 3--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP1036T_SHORTSP1036: Spindle function 4--ORW0x0000 to 0xFFFF
M_SSEC_MPSP_SP1037T_SHORTSP1037: Load inertia scale--ORW-32768 to 32767
M_SSEC_MPSP_SP1038T_SHORTSP1038: Notch filter frequency 1 (76Hz -)--ORW-32768 to 32767
M_SSEC_MPSP_SP1039T_SHORTSP1039: Lost motion compensation timing--ORW-32768 to 32767
M_SSEC_MPSP_SP1040T_SHORTSP1040: Lost motion compensation 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1041T_SHORTSP1041: Lost motion compensation 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1042T_SHORTSP1042: Overshoot compensation 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1043T_SHORTSP1043: Overshoot compensation 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1044T_SHORTSP1044: Disturbance observer filter frequency--ORW-32768 to 32767
M_SSEC_MPSP_SP1045T_SHORTSP1045: Disturbance observer gain--ORW-32768 to 32767
M_SSEC_MPSP_SP1046T_SHORTSP1046: Notch filter frequency 2 (76Hz -)--ORW-32768 to 32767
M_SSEC_MPSP_SP1047T_SHORTSP1047: Inductive voltage compensation gain--ORW-32768 to 32767
M_SSEC_MPSP_SP1048T_SHORTSP1048: Voltage non-sensitive band--ORW-32768 to 32767
M_SSEC_MPSP_SP1049T_SHORTSP1049: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1050T_SHORTSP1050: Acceleration rate feed forward--ORW-32768 to 32767
M_SSEC_MPSP_SP1051T_SHORTSP1051: Dual FB control time constant--ORW-32768 to 32767
M_SSEC_MPSP_SP1052T_SHORTSP1052: Dual FB control non-sensitive band--ORW-32768 to 32767
M_SSEC_MPSP_SP1053T_SHORTSP1053: Excessive error detection width (Speed mode)--ORW-32768 to 32767
M_SSEC_MPSP_SP1054T_SHORTSP1054: Closed loop overrun detection width--ORW-32768 to 32767
M_SSEC_MPSP_SP1055T_SHORTSP1055: EMG maximum delay time--ORW-32768 to 32767
M_SSEC_MPSP_SP1056T_SHORTSP1056: Deceleration control time constant--ORW-32768 to 32767
M_SSEC_MPSP_SP1057T_SHORTSP1057: Spindle side gear 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1058T_SHORTSP1058: Spindle side gear 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1059T_SHORTSP1059: Spindle side gear 3--ORW-32768 to 32767
M_SSEC_MPSP_SP1060T_SHORTSP1060: Spindle side gear 4--ORW-32768 to 32767
M_SSEC_MPSP_SP1061T_SHORTSP1061: Motor side gear 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1062T_SHORTSP1062: Motor side gear 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1063T_SHORTSP1063: Motor side gear 3--ORW-32768 to 32767
M_SSEC_MPSP_SP1064T_SHORTSP1064: Motor side gear 4--ORW-32768 to 32767
M_SSEC_MPSP_SP1065T_SHORTSP1065: Torque control 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1066T_SHORTSP1066: Torque control 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1067T_SHORTSP1067: Torque control 3--ORW-32768 to 32767
M_SSEC_MPSP_SP1068T_SHORTSP1068: Torque control 4--ORW-32768 to 32767
M_SSEC_MPSP_SP1069T_SHORTSP1069: Lower limit value of current reduction during acceleration--ORW-32768 to 32767
M_SSEC_MPSP_SP1070T_SHORTSP1070: Break point speed of current reduction during acceleration--ORW-32768 to 32767
M_SSEC_MPSP_SP1071T_SHORTSP1071: Lower limit value of current reduction during deceleration--ORW-32768 to 32767
M_SSEC_MPSP_SP1072T_SHORTSP1072: Break point speed of current reduction during deceleration--ORW-32768 to 32767
M_SSEC_MPSP_SP1073T_SHORTSP1073: Variable speed gain target value--ORW-32768 to 32767
M_SSEC_MPSP_SP1074T_SHORTSP1074: Variable speed gain change start speed--ORW-32768 to 32767
M_SSEC_MPSP_SP1075T_SHORTSP1075: Slip compensation scale of H coil in regeneration--ORW-32768 to 32767
M_SSEC_MPSP_SP1076T_SHORTSP1076: Slip compensation scale of L coil in regeneration--ORW-32768 to 32767
M_SSEC_MPSP_SP1077T_SHORTSP1077: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1078T_SHORTSP1078: Temperature compensation function selection--ORW-32768 to 32767
M_SSEC_MPSP_SP1079T_SHORTSP1079: Temperature compensation initial value--ORW-32768 to 32767
M_SSEC_MPSP_SP1080T_SHORTSP1080: Temperature compensation iron-loss coefficient--ORW-32768 to 32767
M_SSEC_MPSP_SP1081T_SHORTSP1081: Speed cancel coefficient--ORW-32768 to 32767
M_SSEC_MPSP_SP1082T_SHORTSP1082: Phase compensation time constant lower limit value--ORW-32768 to 32767
M_SSEC_MPSP_SP1083T_SHORTSP1083: Phase compensation completion width--ORW-32768 to 32767
M_SSEC_MPSP_SP1084T_SHORTSP1084: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1085T_SHORTSP1085: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1086T_SHORTSP1086: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1087T_SHORTSP1087: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1088T_SHORTSP1088: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1089T_SHORTSP1089: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1090T_SHORTSP1090: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1091T_SHORTSP1091: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1092T_SHORTSP1092: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1093T_SHORTSP1093: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1094T_SHORTSP1094: Coil switch gate shut off timer--ORW-32768 to 32767
M_SSEC_MPSP_SP1095T_SHORTSP1095: Coil switch current limit timer--ORW-32768 to 32767
M_SSEC_MPSP_SP1096T_SHORTSP1096: Coil switch current limit value--ORW-32768 to 32767
M_SSEC_MPSP_SP1097T_SHORTSP1097:Q axis current lead compensation--ORW-32768 to 32767
M_SSEC_MPSP_SP1098T_SHORTSP1098:D axis current lead compensation--ORW-32768 to 32767
M_SSEC_MPSP_SP1099T_SHORTSP1099:Q axis current gain--ORW-32768 to 32767
M_SSEC_MPSP_SP1100T_SHORTSP1100:D axis current gain--ORW-32768 to 32767
M_SSEC_MPSP_SP1101T_SHORTSP1101:Q axis current lead compensation(L-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1102T_SHORTSP1102:D axis current lead compensation(L-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1103T_SHORTSP1103:Q axis current gain (L-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1104T_SHORTSP1104:D axis current gain (L-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1105T_SHORTSP1105:(Reserved for M-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1106T_SHORTSP1106:(Reserved for M-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1107T_SHORTSP1107:(Reserved for M-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1108T_SHORTSP1108:(Reserved for M-coil)--ORW-32768 to 32767
M_SSEC_MPSP_SP1109T_SHORTSP1109: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1110T_SHORTSP1110: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1111T_SHORTSP1111: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1112T_SHORTSP1112: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1113T_SHORTSP1113: Current command value in open loop--ORW-32768 to 32767
M_SSEC_MPSP_SP1114T_SHORTSP1114: Orientation pulse error check width--ORW-32768 to 32767
M_SSEC_MPSP_SP1115T_SHORTSP1115:(Reserved for SPM Z phase position magnetic pole data)--ORW-32768 to 32767
M_SSEC_MPSP_SP1116T_SHORTSP1116: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1117T_SHORTSP1117: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1118T_SHORTSP1118: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1119T_SHORTSP1119: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1120T_SHORTSP1120: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1121T_SHORTSP1121: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1122T_SHORTSP1122: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1123T_SHORTSP1123: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1124T_SHORTSP1124: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1125T_SHORTSP1125: DA output data No. channel 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1126T_SHORTSP1126: DA output data No. channel 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1127T_SHORTSP1127: DA output scale channel 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1128T_SHORTSP1128: DA output scale channel 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1129T_SHORTSP1129: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1130T_SHORTSP1130: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1131T_SHORTSP1131: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1132T_SHORTSP1132: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1133T_SHORTSP1133: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1134T_SHORTSP1134: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1135T_SHORTSP1135: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1136T_SHORTSP1136: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1137T_SHORTSP1137: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1138T_SHORTSP1138: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1139T_SHORTSP1139: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1140T_SHORTSP1140: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1141T_SHORTSP1141: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1142T_SHORTSP1142: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1143T_SHORTSP1143: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1144T_SHORTSP1144: H-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1145T_SHORTSP1145: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1146T_SHORTSP1146: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1147T_SHORTSP1147: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1148T_SHORTSP1148: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1149T_SHORTSP1149: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1150T_SHORTSP1150: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1151T_SHORTSP1151: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1152T_SHORTSP1152: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1153T_SHORTSP1153: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1154T_SHORTSP1154: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1155T_SHORTSP1155: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1156T_SHORTSP1156: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1157T_SHORTSP1157: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1158T_SHORTSP1158: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1159T_SHORTSP1159: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1160T_SHORTSP1160: H-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1161T_SHORTSP1161: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1162T_SHORTSP1162: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1163T_SHORTSP1163: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1164T_SHORTSP1164: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1165T_SHORTSP1165: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1166T_SHORTSP1166: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1167T_SHORTSP1167: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1168T_SHORTSP1168: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1169T_SHORTSP1169: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1170T_SHORTSP1170: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1171T_SHORTSP1171: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1172T_SHORTSP1172: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1173T_SHORTSP1173: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1174T_SHORTSP1174: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1175T_SHORTSP1175: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1176T_SHORTSP1176: L-coil motor constant 1--ORW-32768 to 32767
M_SSEC_MPSP_SP1177T_SHORTSP1177: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1178T_SHORTSP1178: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1179T_SHORTSP1179: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1180T_SHORTSP1180: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1181T_SHORTSP1181: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1182T_SHORTSP1182: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1183T_SHORTSP1183: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1184T_SHORTSP1184: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1185T_SHORTSP1185: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1186T_SHORTSP1186: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1187T_SHORTSP1187: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1188T_SHORTSP1188: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1189T_SHORTSP1189: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1190T_SHORTSP1190: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1191T_SHORTSP1191: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1192T_SHORTSP1192: L-coil motor constant 2--ORW-32768 to 32767
M_SSEC_MPSP_SP1193T_SHORTSP1193: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1194T_SHORTSP1194: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1195T_SHORTSP1195: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1196T_SHORTSP1196: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1197T_SHORTSP1197: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1198T_SHORTSP1198: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1199T_SHORTSP1199: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1200T_SHORTSP1200: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1201T_SHORTSP1201: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1202T_SHORTSP1202: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1203T_SHORTSP1203: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1204T_SHORTSP1204: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1205T_SHORTSP1205: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1206T_SHORTSP1206: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1207T_SHORTSP1207: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1208T_SHORTSP1208: M-coil motor constant 1(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1209T_SHORTSP1209: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1210T_SHORTSP1210: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1211T_SHORTSP1211: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1212T_SHORTSP1212: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1213T_SHORTSP1213: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1214T_SHORTSP1214: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1215T_SHORTSP1215: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1216T_SHORTSP1216: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1217T_SHORTSP1217: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1218T_SHORTSP1218: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1219T_SHORTSP1219: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1220T_SHORTSP1220: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1221T_SHORTSP1221: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1222T_SHORTSP1222: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1223T_SHORTSP1223: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1224T_SHORTSP1224: M-coil motor constant 2(Reserved)--ORW-32768 to 32767
M_SSEC_MPSP_SP1225T_SHORTSP1225: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1226T_SHORTSP1226: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1227T_SHORTSP1227: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1228T_SHORTSP1228: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1229T_SHORTSP1229: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1230T_SHORTSP1230: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1231T_SHORTSP1231: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1232T_SHORTSP1232: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1233T_SHORTSP1233: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1234T_SHORTSP1234: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1235T_SHORTSP1235: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1236T_SHORTSP1236: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1237T_SHORTSP1237: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1238T_SHORTSP1238: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1239T_SHORTSP1239: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1240T_SHORTSP1240: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1241T_SHORTSP1241: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1242T_SHORTSP1242: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1243T_SHORTSP1243: Not open for user--ORW-32768 to 32767
M_SSEC_TOFS2S_WEAR_L(x)T_FLOATBIN/T_LONGWear in length (x=1 to 999)O--RW99999.999
M_SSEC_TOFS2S_WEAR_R(x)T_FLOATBIN/T_LONGWear in diameter (x=1 to 999)O--RW999.999
M_SSEC_EXST_MDI_CLR_STST_CHARMDI clear completeO-RW0 to 1, setting is only 0
M_SSEC_EXST_CONNECT_STST_CHARMore than one network being connectedO--R0 to 1
M_SSEC_EXST_RAS_IMPOSITIONT_UCHARImpositionO--R0 to 1
M_SSEC_EXST_RAS_INTERLOCK_PT_LONG(BIT)Interlock (+)O--R"00000000" to "11111111"
M_SSEC_EXST_RAS_INTERLOCK_NT_LONG(BIT)Interlock (-)O--R"00000000" to "11111111"
M_SSEC_EXST_RAS_EXTDCC_PT_LONG(BIT)External deceleration (+)O--R"00000000" to "11111111"
M_SSEC_EXST_RAS_EXTDCC_NT_LONG(BIT)External deceleration (-)O--R"00000000" to "11111111"
M_SSEC_EXST_RAPID_OVERRIDET_LONGRapid traverse overrideO--R0 to 10000 (In increment of 1/100%)
M_SSEC_EXST_SCRN_REQ_UPT_UCHARRising edge signal of Y729 (screen display request)----RW0 to 1, Setting is only 0
M_SSEC_EXST_SCRN_REQ_DOWNT_UCHARFalling edge signal of Y729 (screen display request)----RW0 to 1, Setting is only 0
M_SSEC_EXST_MACRO_ALMT_CHARMacro alarm occurringO--R0 to 2, 1: #3000 occurring, 2: #3006 occurring
M_SSEC_PLCINDXPRM_PSW13DOG2T_FLOATBINPSW13 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW14DOG1T_FLOATBINPSW14 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW14DOG2T_FLOATBINPSW14 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW15DOG1T_FLOATBINPSW15 Area setting 1-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PSW15DOG2T_FLOATBINPSW15 Area setting 2-ORW-99999.999 to 99999.999
M_SSEC_PLCINDXPRM_PUSHTT_FLOATBINStopper amount-ORW0 to 359.999
M_SSEC_PLCINDXPRM_PUSHT1T_SHORTStopper standby time-ORW0 to 9999
M_SSEC_PLCINDXPRM_PUSHT2T_SHORTStopper torque release time-ORW0 to 9999
M_SSEC_PLCINDXPRM_PUSHT3T_SHORTSet position signal output delay time-ORW0 to 9999
M_SSEC_CCLK_BASE_ABNML_LINK3T_CHAR3rd slot Setting of data link faulty station----RW0,1
M_SSEC_CCLK_BASE_PLC_STOP3T_CHAR3rd slot Setting at PLC STOP----RW0,1
M_SSEC_CCLK_BASE_OCCUP_BUREAUX3T_CHAR3rd slot Number of occupied stations----RW0 to 4
M_SSEC_CCLK_BASE_CYCLIC3T_CHAR3rd slot Extended cyclic setting----RW0,1,2,4,8
M_SSEC_CCLK_BASE_CONNECT_NUM3T_CHAR3rd slot Number of connected modules----RW0 to 64
M_SSEC_CCLK_BASE_RETRY3T_CHAR3rd slot Number of retries----RW0 to 7
M_SSEC_CCLK_BASE_AUTO_OPE_MATA3T_CHAR3rd slot Number of automatic return modules----RW0 to 10
M_SSEC_CCLK_BASE_STANDBY_MASTER3T_CHAR3rd slot Standby master station----RW0 to 64
M_SSEC_CCLK_BASE_NC_DOWN3T_CHAR3rd slot Operation at NC down----RW0,1
M_SSEC_CCLK_BASE_SCAN_MODE3T_CHAR3rd slot Scan mode----RW0,1
M_SSEC_CCLK_BASE_DELAY_TIME3T_CHAR3rd slot Delay time----RWFixed to 0
M_SSEC_CCLK_BASE_RX_DEV3T_CHAR3rd slot Remote input (RX) refresh device name----RWX,M,L,B,D,W,R
M_SSEC_CCLK_BASE_RX_NO3T_SHORT3rd slot Remote input (RX) refresh device No.----RWDepends on the device name X0 to X5FF M0 to M10239 L0 to L511 B0 to B1FFF D0 to D2047 W0 to W1FFF R8300 to R9799 R9800 to R9899
M_SSEC_CCLK_BASE_RY_DEV3T_CHAR3rd slot Remote output (RY) refresh device name----RWY,M,L,B,D,W,R
M_SSEC_CCLK_BASE_RY_NO3T_SHORT3rd slot Remote output (RY) refresh device No.----RWDepends on the device name Y0 to Y5FF Others are the same with RX
M_SSEC_CCLK_BASE_RWR_DEV3T_CHAR3rd slot Remote register (RWr) refresh device name----RWM,L,B,D,W,R
M_SSEC_CCLK_BASE_RWR_NO3T_SHORT3rd slot Remote register (RWr) refresh device No.----RWDepends on the device name The same with RX
M_SSEC_CCLK_BASE_RWW_DEV3T_CHAR3rd slot Remote register (RWw) refresh device name----RWM,L,B,D,W,R
M_SSEC_CCLK_BASE_RWW_NO3T_SHORT3rd slot Remote register (RWw) refresh device No.----RWDepends on the device name The same with RX
M_SSEC_CCLK_BASE_SB_DEV3T_CHAR3rd slot Special relay (SB) refresh device name----RWM,L,B,D,W,R,SB
M_SSEC_CCLK_BASE_SB_NO3T_SHORT3rd slot Special relay (SB) refresh device No.----RWDepends on the device name SB0 to SB1FF Others are the same with RX
M_SSEC_CCLK_BASE_SW_DEV3T_CHAR3rd slot Special relay (SW) refresh device name----RWM,L,B,D,W,R,SW
M_SSEC_CCLK_BASE_SW_NO3T_SHORT3rd slot Special relay (SW) refresh device No.----RWDepends on the device name SW0 to SW1FF Others are the same with RX
M_SSEC_CCLK_BASE_PRTCL_VER3T_CHAR3rd slot Protocol version----RW0,1
M_SSEC_MPSP_SP1244T_SHORTSP1244: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1245T_SHORTSP1245: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1246T_SHORTSP1246: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1247T_SHORTSP1247: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1248T_SHORTSP1248: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1249T_SHORTSP1249: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1250T_SHORTSP1250: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1251T_SHORTSP1251: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1252T_SHORTSP1252: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1253T_SHORTSP1253: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1254T_SHORTSP1254: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1255T_SHORTSP1255: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1256T_SHORTSP1256: Not open for user--ORW-32768 to 32767
M_SSEC_MPSP_SP1257T_SHORTSP1257: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1258T_SHORTSP1258: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1259T_SHORTSP1259: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1260T_SHORTSP1260: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1261T_SHORTSP1261: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1262T_SHORTSP1262: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1263T_SHORTSP1263: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1264T_SHORTSP1264: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1265T_SHORTSP1265: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1266T_SHORTSP1266: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1267T_SHORTSP1267: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1268T_SHORTSP1268: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1269T_SHORTSP1269: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1270T_SHORTSP1270: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1271T_SHORTSP1271: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1272T_SHORTSP1272: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1273T_SHORTSP1273: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1274T_SHORTSP1274: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1275T_SHORTSP1275: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1276T_SHORTSP1276: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1277T_SHORTSP1277: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1278T_SHORTSP1278: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1279T_SHORTSP1279: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1280T_SHORTSP1280: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1281T_SHORTSP1281: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1282T_SHORTSP1282: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1283T_SHORTSP1283: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1284T_SHORTSP1284: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1285T_SHORTSP1285: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1286T_SHORTSP1286: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1287T_SHORTSP1287: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1288T_SHORTSP1288: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1289T_SHORTSP1289: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1290T_SHORTSP1290: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1291T_SHORTSP1291: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1292T_SHORTSP1292: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1293T_SHORTSP1293: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1294T_SHORTSP1294: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1295T_SHORTSP1295: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1296T_SHORTSP1296: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1297T_SHORTSP1297: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1298T_SHORTSP1298: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1299T_SHORTSP1299: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1300T_SHORTSP1300: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1301T_SHORTSP1301: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1302T_SHORTSP1302: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1303T_SHORTSP1303: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1304T_SHORTSP1304: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1305T_SHORTSP1305: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1306T_SHORTSP1306: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1307T_SHORTSP1307: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1308T_SHORTSP1308: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1309T_SHORTSP1309: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1310T_SHORTSP1310: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1311T_SHORTSP1311: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1312T_SHORTSP1312: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1313T_SHORTSP1313: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1314T_SHORTSP1314: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1315T_SHORTSP1315: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1316T_SHORTSP1316: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1317T_SHORTSP1317: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1318T_SHORTSP1318: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1319T_SHORTSP1319: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1320T_SHORTSP1320: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1321T_SHORTSP1321: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1322T_SHORTSP1322: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1323T_SHORTSP1323: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1324T_SHORTSP1324: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1325T_SHORTSP1325: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1326T_SHORTSP1326: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1327T_SHORTSP1327: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1328T_SHORTSP1328: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1329T_SHORTSP1329: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1330T_SHORTSP1330: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1331T_SHORTSP1331: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1332T_SHORTSP1332: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1333T_SHORTSP1333: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1334T_SHORTSP1334: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1335T_SHORTSP1335: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1336T_SHORTSP1336: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1337T_SHORTSP1337: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1338T_SHORTSP1338: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1339T_SHORTSP1339: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1340T_SHORTSP1340: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1341T_SHORTSP1341: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1342T_SHORTSP1342: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1343T_SHORTSP1343: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1344T_SHORTSP1344: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1345T_SHORTSP1345: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1346T_SHORTSP1346: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1347T_SHORTSP1347: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1348T_SHORTSP1348: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1349T_SHORTSP1349: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1350T_SHORTSP1350: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1351T_SHORTSP1351: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1352T_SHORTSP1352: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1353T_SHORTSP1353: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1354T_SHORTSP1354: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1355T_SHORTSP1355: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1356T_SHORTSP1356: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1357T_SHORTSP1357: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1358T_SHORTSP1358: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1359T_SHORTSP1359: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1360T_SHORTSP1360: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1361T_SHORTSP1361: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1362T_SHORTSP1362: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1363T_SHORTSP1363: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1364T_SHORTSP1364: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1365T_SHORTSP1365: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1366T_SHORTSP1366: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1367T_SHORTSP1367: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1368T_SHORTSP1368: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1369T_SHORTSP1369: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1370T_SHORTSP1370: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1371T_SHORTSP1371: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1372T_SHORTSP1372: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1373T_SHORTSP1373: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1374T_SHORTSP1374: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1375T_SHORTSP1375: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1376T_SHORTSP1376: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1377T_SHORTSP1377: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1378T_SHORTSP1378: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1379T_SHORTSP1379: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1380T_SHORTSP1380: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1381T_SHORTSP1381: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1382T_SHORTSP1382: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1383T_SHORTSP1383: Not used--ORW-32768 to 32767
M_SSEC_MPSP_SP1384T_SHORTSP1384: Not used--ORW-32768 to 32767
M_SSEC_MPLMAC_TSMACROT_STRSmac program No.----RW0 to 999999999
M_SSEC_MPLMAC_TTMACROTT_CHARTmac type----RW0 to 3
M_SSEC_MPLMAC_TTMACROT_STRTmac program No.----RW0 to 999999999
M_SSEC_MPLMAC_ASC_MACSET(x)T_LONGASCII[]ASCII code macro valid (x=1 to 2)O--RW0,1
M_SSEC_MPLMAC_ASC_CODE(x)T_STRASCII[]ASCII code (x=1 to 2)O--RWA to Z
M_SSEC_MPLMAC_ASC_TYPE(x)T_CHARASCII[]calling type (0:M98,1:G65,2:G66,3:G66.1) (x=1 to 2)O--RW0 to 3
M_SSEC_MPLMAC_ASC_PROGNO(x)T_STRASCII[]program No. (x=1 to 2)O--RW0 to 99999999
M_SSEC_MPLMAC_ASC_COM_VAL(x)T_SHORTASCII[]common variable No. (100 to 149) (x=1 to 2)O--RW0,100 to 149

 

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/support/mitsubishi-m70-commands/symbol-sub-section
Support | Mitsubishi M70 Commands | Overview
Here yo can find a list of command sections for Mitsubishi CNC Series 700/70 controllers . With our... [read more]
Overview
Support | Mitsubishi M70 Commands | Absolute position detection data
Absolute position detection type Absolute position detection status Machine end Machine value Yet to pass (Machine value status) Automatic initial setting message Executing... [read more]
Absolute position detection data
Support | Mitsubishi M70 Commands | Absolute position parameter
Absolute position detection method Reference Z- direction Check G28 verification width M02 verification width Current limit (%) Stopper speed Approach Near reference position +... [read more]
Absolute position parameter
Support | Mitsubishi M70 Commands | Anshin-net 1
Telephone number to contact 1 Comment1 Telephone number to contact 2 Comment2 Telephone number to contact 3 Comment3 Anshin-net enabled MTB-net enabled Password in machining data... [read more]
Anshin-net 1
Support | Mitsubishi M70 Commands | Anshin-net 2
Modem's telephone number Call centre’s telephone No. MTB’s telephone No. Num arrival call 1 Num arrival call 2 Num arrival call 3 Num arrival call 4 Num arrival call 5 MTB's... [read more]
Anshin-net 2
Support | Mitsubishi M70 Commands | Anshin-net I_F
One-touch call Operator notice Arbitrary No. Notice telephone No. Anshin-net message status Message from NC service Anshin-net communication situation Anshin-net communication... [read more]
Anshin-net I_F
Support | Mitsubishi M70 Commands | Auxiliary axis control
Operation test mode Absolute position set Position setting method Position setting status Operation mode Operation parameter group Scale Operation status Auxiliary axis reference... [read more]
Auxiliary axis control
Support | Mitsubishi M70 Commands | Auxiliary axis drive unit monitor
Droop Rotation speed Load current MAX current 1 MAX current 2 Overload Regenerative load Current station No. Current position Target station No. Command position Auxiliary axis... [read more]
Auxiliary axis drive unit monitor
Support | Mitsubishi M70 Commands | Axis parameter
Axis name Display axis name Increment command axis name Command unit Inch output Rotary axis Motor ccw Diameter specification axis Spindle interpolation Drive unit interface... [read more]
Axis parameter
Support | Mitsubishi M70 Commands | Axis parameter for auxiliary axis
Motor series Regeneration option type Motor side gear ratio (machine rotation ratio) Machine side gear ratio (motor rotation ratio) Feed pitch In-position detection width... [read more]
Axis parameter for auxiliary axis
Support | Mitsubishi M70 Commands | Axis status
Axis status (Axis removal) Axis status (Servo OFF) Axis status (1st ref) Axis status (2nd ref) Axis status (3rd ref) Axis status (4th ref) Axis status (Mirror image) Axis status... [read more]
Axis status
Support | Mitsubishi M70 Commands | Background check
Optional block skip See: Device Driver for Mitsubishi controllers... [read more]
Background check
Support | Mitsubishi M70 Commands | Barrier
P0 X P1 X P1 Z P2 X P2 Z P3 X See: Device Driver for Mitsubishi controllers... [read more]
Barrier
Support | Mitsubishi M70 Commands | Base parameter
Life management count Split life management display screen Life management re-count M code Validate alternate M code M96 alternate M code M97 alternate M code Validate status... [read more]
Base parameter
Support | Mitsubishi M70 Commands | Bit selection
Bit selection (x=0 to 195) See: Device Driver for Mitsubishi controllers... [read more]
Bit selection
Support | Mitsubishi M70 Commands | Buffer correction
Buffer correction status Buffer correction program path See: Device Driver for Mitsubishi controllers... [read more]
Buffer correction
Support | Mitsubishi M70 Commands | CC-Link parameter Base
1st slot Station No. 1st slot Transmission rate and mode 1st slot Setting of data link faulty station 1st slot Setting at PLC STOP 1st slot Number of occupied stations 1st slot... [read more]
CC-Link parameter Base
Support | Mitsubishi M70 Commands | CC-Link parameter Station information
Station 1 Station type Station 1 Extended cyclic setting Station 1 Number of occupied stations Station 1 Station No. Station 1 Remote station points Station 1 Reserved station... [read more]
CC-Link parameter Station information
Support | Mitsubishi M70 Commands | CNC information
The number of axes in a part system (Basic configuration) The number of sets of common variable (#100-) The total number of NC axes (NC) The total number of control axes... [read more]
CNC information
Support | Mitsubishi M70 Commands | Common variable By each part system 100
100~199 (x=100~199) See: Device Driver for Mitsubishi controllers... [read more]
Common variable By each part system 100
Support | Mitsubishi M70 Commands | Common variable Common between part systems 500
Common variable (common between part systems #400 to #999) (x=400 to 999) Common variable comment (common between part systems #500 to #519) (x=500 to 519) Common variable... [read more]
Common variable Common between part systems 500
Support | Mitsubishi M70 Commands | Computer Link parameter
Baud rate Stop bit Parity effective Even parity Character length Hand shake Time-out set Data code Link parameter 1 Link parameter 2 Link parameter 3 Link parameter 4 Link... [read more]
Computer Link parameter
Support | Mitsubishi M70 Commands | Coordinate system offset Extended workpiece coordinate
G54.1P1 G54.1P2 G54.1P3 G54.1P4 G54.1P5 G54.1P6 G54.1P7 G54.1P8 G54.1P9 G54.1P10 G54.1P11 G54.1P12 G54.1P13 G54.1P14 G54.1P15 G54.1P16 G54.1P17 G54.1P18 G54.1P19 G54.1P20... [read more]
Coordinate system offset Extended workpiece coordinate
Support | Mitsubishi M70 Commands | Coordinate system offset Local coordinate
Local coordinate system offset (G54) Local coordinate system offset (G55) Local coordinate system offset (G56) Local coordinate system offset (G57) Local coordinate system offset... [read more]
Coordinate system offset Local coordinate
Support | Mitsubishi M70 Commands | Coordinate system offset Other coordinate system
External workpiece offset (EXT) G92 coordinate system offset See: Device Driver for Mitsubishi controllers... [read more]
Coordinate system offset Other coordinate system
Support | Mitsubishi M70 Commands | Coordinate system offset Workpiece coordinate
G54 workpiece coordinate system offset G55 workpiece coordinate system offset G56 workpiece coordinate system offset G57 workpiece coordinate system offset G58 workpiece... [read more]
Coordinate system offset Workpiece coordinate
Support | Mitsubishi M70 Commands | Counter
Workpiece coordinate position counter Machine position counter Current position counter Relative position counter Program position counter Remaining command Skip coordinate... [read more]
Counter
Support | Mitsubishi M70 Commands | Cumulative time
Power ON time Automatic operation time Automatic start up time External cumulative time 1 External cumulative time 2 Date Time Cycle time Machining time calculation See:... [read more]
Cumulative time
Support | Mitsubishi M70 Commands | Ethernet parameter
Start of service IP address Subnet mask Gateway Port No. Ethernet communication parameter before conversion (Host address) Host's port No. Local IP Address Local Subnetmask IP... [read more]
Ethernet parameter
Support | Mitsubishi M70 Commands | F modal
Program command F modal (FA) Manual feedrate (FM) Synchronous feedrate (FS) Thread cutting lead (FE) Remaining dwell time Constant surface speed control (Surface speed S) (x=1 to... [read more]
F modal
Support | Mitsubishi M70 Commands | File information
The number of machining programs to register The number of remaining machining programs Machining program character capacity The number of remaining characters in machining... [read more]
File information
Support | Mitsubishi M70 Commands | G modal
G code (x=Group1 to 21) Tool compensation No. of shape (diameter) compensation modal Compensation amount of shape (diameter) compensation modal Wear amount of shape (diameter)... [read more]
G modal
Support | Mitsubishi M70 Commands | Hardware configuration
RIO unit 1 to 8 Terminal RIO unit 1 to 4 Control unit (NC card) Extension unit Terminal display (For M7) Extension bus for optional card (OPTION CARD) (For M7) External interface... [read more]
Hardware configuration
Support | Mitsubishi M70 Commands | Input_Output parameter
Device 4 DC4/DC4 output Device 4 CR output Device 4 EIA output Device 4 Feed character Device 4 Parity V Device 4 Time-out Device 4 DR OFF Device 4 Data ASCII Device 4 Input type... [read more]
Input_Output parameter
Support | Mitsubishi M70 Commands | Key history
Collection status of sampling Collection status of history Specification-Part system Specification-Spindle Specification-Servo Data-Hardware configuration Data-Software... [read more]
Key history
Support | Mitsubishi M70 Commands | Ladder interface Common
Load meter name (x=1,2) Load meter graduation comment 1st line (x=1,2) Load meter unit comment (x=1,2) Load meter graduation comment 2nd line (x=1,2) Spindle standby tool comment... [read more]
Ladder interface Common
Support | Mitsubishi M70 Commands | Life management data
Tool No. (x=1 to 1000) Status (x=1 to 1000) Method (x=1 to 1000) Length compensation (x=1 to 1000) Diameter compensation (x=1 to 1000) Used (time, the number of times, wear... [read more]
Life management data
Support | Mitsubishi M70 Commands | Life management information
The number of tools in life management The number of registration groups in life management Data change flag in life management The maximum registration number of tools in life... [read more]
Life management information
Support | Mitsubishi M70 Commands | Local variable
Local variable (Level0) (x=1 to 33) Local variable (Level1) (x=1 to 33) Local variable (Level2) (x=1 to 33) Local variable (Level3) (x=1 to 33) Local variable (Level4) (x=1 to... [read more]
Local variable
Support | Mitsubishi M70 Commands | Machine error compensation parameter
Machine error compensation increment method 1st to 28th axis base axis (1 to 28) 1st to 28th axis compensation axis (1 to 28) 1st to 28th axis division point number at reference... [read more]
Machine error compensation parameter
Support | Mitsubishi M70 Commands | Macro list
M[01] code M[01] type M[01] program No. M[02] code M[02] type M[02] program No. M[03] code M[03] type M[03] program No. M[04] code M[04] type M[04] program No. M[05] code M[05]... [read more]
Macro list
Support | Mitsubishi M70 Commands | MSTB execution status
M command/Manual numerical command (M1) M command/Manual numerical command (M2) M command/Manual numerical command (M3) M command/Manual numerical command (M4) M command/Manual... [read more]
MSTB execution status
Support | Mitsubishi M70 Commands | MSTB modal
S modal (S1 to S6) (x=1 to 6) T modal (T1 to T2) (x=1 to 2) M modal (M1 to M4) (x=1 to 4) B modal (B1 to B4) (x=1 to 4) See:... [read more]
MSTB modal
Support | Mitsubishi M70 Commands | Open parameter1 long
Open parameter value 1(long) (x=1 to 896) See: Device Driver for Mitsubishi controllers... [read more]
Open parameter1 long
Support | Mitsubishi M70 Commands | Open parameter2 double
Open parameter value 2(long) (x=1 to 896) See: Device Driver for Mitsubishi controllers... [read more]
Open parameter2 double
Support | Mitsubishi M70 Commands | Operation parameter
Counter type 1 to 6 (x=1 to 6) Display switch between automatic/manual Edit undo enabled Auto top search Auto backup day 1 Auto backup day 2 Auto backup day 3 Auto backup day 4... [read more]
Operation parameter
Support | Mitsubishi M70 Commands | Operation status
Macro execution level Executing verification stop Verification stop O No. Verification stop N No. Verification stop B No. Verification stop path name Operation status 1... [read more]
Operation status
Support | Mitsubishi M70 Commands | PLC axis indexing parameter
Auxiliary axis No. The number of indexing stations Control parameter 1 Control parameter 2 Stroke length of linear axis Station offset Operation parameter group 1 Automatic... [read more]
PLC axis indexing parameter
Support | Mitsubishi M70 Commands | PLC constant
PLC constant (x=0 to 95 / [M7] x=0 to 899) See: Device Driver for Mitsubishi controllers... [read more]
PLC constant
Support | Mitsubishi M70 Commands | PLC counter
Counter (x=0 to 23 / [M7] x=0 to 255) Number of times of PLC counter (variable) (Only for M7) PLC counter device used status (x=0 to 256) See:... [read more]
PLC counter
Support | Mitsubishi M70 Commands | PLC device bit
Device X (x=0 to 2815 / [M7] x=0 to 8191) Device Y (x=0 to 3583 / [M7] x=0 to 8191) Device M (x=0 to 8191 / [M7] x=0 to 10239) Device F (x=0 to 255 / [M7] x=0 to 1024) Device L... [read more]
PLC device bit
Support | Mitsubishi M70 Commands | PLC device char
Device X (x=0 to 2815 / [M7] x=0 to 8191) Device Y (x=0 to 3583 / [M7] x=0 to 8191) Device M (x=0 to 8191 / [M7] x=0 to 10239) Device F (x=0 to 255 / [M7] x=0 to 1024) Device L... [read more]
PLC device char
Support | Mitsubishi M70 Commands | PLC device long
Device X (x=0 to 2815 / [M7] x=0 to 8191) Device Y (x=0 to 3583 / [M7] x=0 to 8191) Device M (x=0 to 8191 / [M7] x=0 to 10239) Device F (x=0 to 255 / [M7] x=0 to 1024) Device L... [read more]
PLC device long
Support | Mitsubishi M70 Commands | PLC device word
Device X (x=0 to 2815 / [M7] x=0 to 8191) Device Y (x=0 to 3583 / [M7] x=0 to 8191) Device M (x=0 to 8191 / [M7] x=0 to 10239) Device F (x=0 to 255 / [M7] x=0 to 1024) Device L... [read more]
PLC device word
Support | Mitsubishi M70 Commands | PLC forced output
Device C(bit) (x=0 to 4127 / [M7] x=0 to 4255) Device E(bit) (x=0 to 127) Device F(bit) (x=0 to 255 / [M7] x=0 to 1024) Device L(bit) (x=0 to 255 / [M7] x=0 to 511) Device M(bit)... [read more]
PLC forced output
Support | Mitsubishi M70 Commands | PLC switch
PLC switch X (IN) (x=1 to 32) PLC switch Y (OUT) (x=1 to 32) PLC switch X (IN) 1 to 16 PLC switch X (IN) 17 to 32 PLC switch Y (OUT) 1 to 16 PLC switch Y (OUT) 17 to 32 See:... [read more]
PLC switch
Support | Mitsubishi M70 Commands | PLC timer
10ms timer (x=0 to 15 / [M7] x=0 to 703) 100ms timer (x=0 to 79 / [M7] x=0 to 703) 100ms cumulative timer (x=0 to 7 / [M7] x=0 to 63) 10ms additional extension timer... [read more]
PLC timer
Support | Mitsubishi M70 Commands | Position switch
PSW switch 1st position switch axis name 1st position switch hypothetical dog position 1 1st position switch hypothetical dog position 2 1st position switch PSW check method... [read more]
Position switch
Support | Mitsubishi M70 Commands | Power supply monitor
Drive unit type Drive unit serial No. Software version Operation time Alarm history 1 (Time) Alarm history 2 (Time) Alarm history 3 (Time) Alarm history 4 (Time) Alarm history 5... [read more]
Power supply monitor
Support | Mitsubishi M70 Commands | Program execution status
Nest level of sub program in execution Disabled status: Single block/MST complete Disabled status: Feed hold/Override/Exact Path of program in execution Main O No. in execution... [read more]
Program execution status
Support | Mitsubishi M70 Commands | Program tree
Name of main device in execution Main O No. in execution Main N No. in execution Main B No. in execution Sub 1 to 10 device name in execution (x=1 to 10) Sub 1 to 10 O number in... [read more]
Program tree
Support | Mitsubishi M70 Commands | Program tree for graphic check
Main O number in execution for check Main N number in execution for check Main B number in execution for check See:... [read more]
Program tree for graphic check
Support | Mitsubishi M70 Commands | Rererence position return parameter
G28 rapid traverse rate G28 approach speed Reference position shift amount Grid mask amount Grid interval Reference position direction (-) Axis with no reference position Whether... [read more]
Rererence position return parameter
Support | Mitsubishi M70 Commands | Rotary axis configuration parameter
Orthogonal coordinate horizontal axis name Orthogonal coordinate vertical axis name Orthogonal coordinate height axis name Origin zero set coordinate selection Tool handle feed... [read more]
Rotary axis configuration parameter
Support | Mitsubishi M70 Commands | Sampling parameter
Sampling trigger Sampling cycle The number of pieces of sampling data Sampling data buffer address Sampling data buffer size Sampling address #1 (Compatible with M625) Sampling... [read more]
Sampling parameter
Support | Mitsubishi M70 Commands | Servo monitor
Gain Droop Rotation speed MAX current 1 MAX current 2 Overload Regenerative load Drive unit display Alarm 1 Alarm 2 Alarm 3 Alarm 4 Cycle counter Grid interval Grid amount... [read more]
Servo monitor
Support | Mitsubishi M70 Commands | Servo parameter
SV01: Motor side gear ratio SV02: Machine side gear ratio SV03: Position loop gain 1 SV04: Position loop gain 2 SV05: Speed loop gain 1 SV06: Speed loop gain 2 SV07: Speed loop... [read more]
Servo parameter
Support | Mitsubishi M70 Commands | Software configuration
NC system version PLC version PLCe version (Extended external alarm message) 3rd language version 4th language version Servo drive unit version Spindle drive unit version OS... [read more]
Software configuration
Support | Mitsubishi M70 Commands | Speed information
FC (Combined speed) FA: F command feedrate FH: Head feedrate Speed display FC (Combined speed) See: Device Driver... [read more]
Speed information
Support | Mitsubishi M70 Commands | Spindle analog adjustment
Automatic adjustment request Automatic adjustment status Manual adjustment data selection Data in manual adjustment S analog adjustment Ch0 to 3 Offset (x=0 to 3) S analog... [read more]
Spindle analog adjustment
Support | Mitsubishi M70 Commands | Spindle information
Spindle rotation speed (rev/min) Spindle load value Spindle No. of optical spindle Spindle No. of metal spindle The total number of optical spindles The total number of metal... [read more]
Spindle information
Support | Mitsubishi M70 Commands | Spindle monitor
Operation time Alarm history 1 (Time) Alarm history 2 (Time) Gain Droop Rotation speed Load Drive unit display Alarm 1 Alarm 2 Alarm 3 Alarm 4 Cycle counter Control input 1L... [read more]
Spindle monitor
Support | Mitsubishi M70 Commands | Spindle parameter
SP001: Magnetic sensor and motor built-in encoder orientation-mode position loop gain SP002: Encoder orientation-mode position loop gain SP003: C-axis non-cutting position loop... [read more]
Spindle parameter
Support | Mitsubishi M70 Commands | Spindle specification parameter
The number of limit rotation gears 00 The number of limit rotation gears 01 The number of limit rotation gears 10 The number of limit rotation gears 11 The number of maximum... [read more]
Spindle specification parameter
Support | Mitsubishi M70 Commands | Spindle_Standby
Spindle stand by (Tool No.) (x=0 to 4) Spindle stand by (Auxiliary: D) (x=0 to 4) The number of spindles stand by to display Spindle tool's life management data Stand by tool's... [read more]
Spindle_Standby
Support | Mitsubishi M70 Commands | Synchronization error monitor
Command error (1st set) Command error (2nd set) Command error (3rd set) FB error (1st set) FB error (2nd set) FB error (3rd set) Machine position (1st set) Machine position (2nd... [read more]
Synchronization error monitor
Support | Mitsubishi M70 Commands | Tool compensation by each part system Type 1
Compensation data (x=1 to 999) See: Device Driver for Mitsubishi controllers... [read more]
Tool compensation by each part system Type 1
Support | Mitsubishi M70 Commands | Tool compensation by each part system Type 2
Length (x=1 to 999) Diameter (x=1 to 999) See: Device Driver for Mitsubishi controllers... [read more]
Tool compensation by each part system Type 2
Support | Mitsubishi M70 Commands | Tool compensation by each part system Type 3
Tool tip P (x=1 to 999) Tool length X (x=1 to 999) Tool length Y (x=1 to 999) Tool length Z (x=1 to 999) Tool tip R (x=1 to 999) Wear X (x=1 to 999) Wear Y (x=1 to 999) Wear Z... [read more]
Tool compensation by each part system Type 3
Support | Mitsubishi M70 Commands | Tool management data
Tool No. (x=1 to 1000) Tool type (x=1 to 1000) Tool diameter (x=1 to 1000) Tool length (x=1 to 1000) Tool shape data 1 (x=1 to 1000) Tool shape data 2 (x=1 to 1000) Tool colour... [read more]
Tool management data
Support | Mitsubishi M70 Commands | Tool measurement
TLM switch Last travel direction Last travel axis 2nd skip contact Reset input status Skip position read status TLMS status (L sys tool measure 2) Tool compensation amount... [read more]
Tool measurement
Support | Mitsubishi M70 Commands | Tool registration
Tool registration data (Pot No.) (x=1 to 360) Tool registration data (Tool No.) (x=1 to 360) Tool registration data (Auxiliary: D) (x=1 to 360) See:... [read more]
Tool registration
Modified: 2017-09-02