News CNCnetPDM About us Support  
         
  

PMC_GETDTAILERR | PMC

Description

Gets the detailed error information after the function has been executed.

The detailed error information is stored in "err_no", "err_dtno" of "ODBPMCERR".

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI pmc_getdtailerr(unsigned short FlibHndl, ODBPMCERR *err);

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

err   [ out ]
Pointer to the ODBPMCERR structure to set the detailed error information.
The ODBPMCERR structure is as follows.
typedef struct odbpmcerr{
    short   err_no;         /* Detail error */
    short   err_dtno;       /* Data number on error */
} ODBPMCERR ;

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

As for the details, see "Return status of Data window function"

CNC option

For HSSB connection,

    The extended driver/library function is necessary.

For Ethernet connection,

    The Ethernet function and the extended driver/library function are necessary.

    However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows.

    When Embedded Ethernet is used,

      above two optional functions are not required.

    When Ethernet board is used,

      only Ethernet function is required.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)H O O O H O H H H O O O O O O O O
T (Turning) H O O O H - H H H O O O O O O O O
LC (Loader) - - - - - - H H H H H H H H H - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)O O O O - O
L (Laser) - - O - - O
W (Wire) - - O O O O


Power Mate i-DO
Power Mate i-HO
Power Motion i-AO

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/pmc/pmc_getdtailerr
Fanuc Focas Library | Pmc | flist_Pmc
PMC: Function related to PMC... [read more]
flist_Pmc
Fanuc Focas Library | Pmc | pmc_crdmsg
Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
pmc_crdmsg
Fanuc Focas Library | Pmc | pmc_cwrmsg
Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
pmc_cwrmsg
Fanuc Focas Library | Pmc | pmc_get_current_pmc_unit
Get the current PMC unit type.... [read more]
pmc_get_current_pmc_unit
Fanuc Focas Library | Pmc | pmc_get_number_of_pmc
Reads the number of existing PMC paths (i.e. number of unit).... [read more]
pmc_get_number_of_pmc
Fanuc Focas Library | Pmc | pmc_get_pmc_unit_types
Reads the PMC system information that shows what kind of PMC units compose the multi-path PMC system.... [read more]
pmc_get_pmc_unit_types
Fanuc Focas Library | Pmc | pmc_get_timer_type
Reads the PMC timer type of the specified timer number.... [read more]
pmc_get_timer_type
Fanuc Focas Library | Pmc | pmc_kpmsiz
Reads the maximum size of the extended backup memory.... [read more]
pmc_kpmsiz
Fanuc Focas Library | Pmc | pmc_rdalmmsg
Reads the alarm messages from PMC.... [read more]
pmc_rdalmmsg
Fanuc Focas Library | Pmc | pmc_rdcntldata
Reads the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
pmc_rdcntldata
Fanuc Focas Library | Pmc | pmc_rdcntlgrp
Reads the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
pmc_rdcntlgrp
Fanuc Focas Library | Pmc | pmc_rdkpm
Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]
pmc_rdkpm
Fanuc Focas Library | Pmc | pmc_rdkpm2
Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]
pmc_rdkpm2
Fanuc Focas Library | Pmc | pmc_rdmsg
Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
pmc_rdmsg
Fanuc Focas Library | Pmc | pmc_rdpmcinfo
Reads the data information about the attribute of each kind of PMC, the effective range of PMC address, etc.... [read more]
pmc_rdpmcinfo
Fanuc Focas Library | Pmc | pmc_rdpmcparam
The PMC parameter(timer, counter, keep relay, and data) is uploaded by the tape format. When you execute this function, change to... [read more]
pmc_rdpmcparam
Fanuc Focas Library | Pmc | pmc_rdpmcrng
Reads the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
pmc_rdpmcrng
Fanuc Focas Library | Pmc | pmc_rdpmctitle
Reads the PMC title data from PMC. When this function is executed while editing the title data with PMC, the return value... [read more]
pmc_rdpmctitle
Fanuc Focas Library | Pmc | pmc_rdprmend
End of upload of the PMC parameter(timer, counter, keep relay, and data) by the tape format. This function is executable other... [read more]
pmc_rdprmend
Fanuc Focas Library | Pmc | pmc_rdprmstart
Starts uploading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To uploading of PMC parameter, this... [read more]
pmc_rdprmstart
Fanuc Focas Library | Pmc | pmc_select_pmc_unit
Selects PMC that will be the target of other PMC FOCAS2 function by the unit type.... [read more]
pmc_select_pmc_unit
Fanuc Focas Library | Pmc | pmc_set_timer_type
Writes the PMC timer type of the specified timer number.... [read more]
pmc_set_timer_type
Fanuc Focas Library | Pmc | pmc_wrcntldata
Writes the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
pmc_wrcntldata
Fanuc Focas Library | Pmc | pmc_wrcntlgrp
Writes the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
pmc_wrcntlgrp
Fanuc Focas Library | Pmc | pmc_wrkpm
Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]
pmc_wrkpm
Fanuc Focas Library | Pmc | pmc_wrkpm2
Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]
pmc_wrkpm2
Fanuc Focas Library | Pmc | pmc_wrmsg
Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
pmc_wrmsg
Fanuc Focas Library | Pmc | pmc_wrpmcparam
The PMC parameter(timer, counter, keep relay, and data) is downloaded by the tape format. When you execute this function, set... [read more]
pmc_wrpmcparam
Fanuc Focas Library | Pmc | pmc_wrpmcrng
Writes the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
pmc_wrpmcrng
Fanuc Focas Library | Pmc | pmc_wrprmend
End of download of the PMC parameter(timer, counter, keep relay, and data) by the tape format. Even if the PWE of CNC parameter is... [read more]
pmc_wrprmend
Fanuc Focas Library | Pmc | pmc_wrprmstart
Starts downloading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To downloading of PMC parameter,... [read more]
pmc_wrprmstart
Modified: 2018-06-11