News CNCnetPDM About us Support  
         
  

PMC_RDPRMEND | PMC

Description

End of upload of the PMC parameter(timer, counter, keep relay, and data) by the tape format.

This function is executable other than EDIT mode.
However, when EW_MODE or EW_PATH occurred by pmc_rdpmcparam, the return value of this function becomes the same value, too.
MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI pmc_rdprmend(unsigned short FlibHndl);

Arguments : HSSB

FlibHndl   [ in ]

Specify the library handle.
See "Library handle" for details.

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_FUNC
(1)
pmc_rdprmstart function has not been executed.
EW_NOOPT
(6)
no option
EW_MODE
(12)
CNC mode error
pmc_rdpmcparam was executed other than the EDIT mode.
EW_PATH
(11)
PMC unit type was wrong.(only 0i-F,30i/31i/32i)
The PMC unit type was changed.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

    The extended driver/library function is necessary.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X O O X X X X X H H H H H H H O
T (Turning) X X O O X - X X X H H H H H H H O
LC (Loader) - - - - - - X X X H H H H H H - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)H H H H - H
L (Laser) - - H - - H
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

pmc_rdprmstart   pmc_rdpmcparam   pmc_wrprmstart   pmc_wrpmcparam   pmc_wrprmend  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/pmc/pmc_rdprmend
Fanuc Focas Library | Pmc | flist_Pmc
PMC: Function related to PMC... [read more]
flist_Pmc
Fanuc Focas Library | Pmc | pmc_crdmsg
Description Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
pmc_crdmsg
Fanuc Focas Library | Pmc | pmc_cwrmsg
Description Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
pmc_cwrmsg
Fanuc Focas Library | Pmc | pmc_getdtailerr
Description Gets the detailed error information after the function has been executed. The detailed error information is stored in "err_no", "err_dtno" of... [read more]
pmc_getdtailerr
Fanuc Focas Library | Pmc | pmc_get_current_pmc_unit
Description Get the current PMC unit type.... [read more]
pmc_get_current_pmc_unit
Fanuc Focas Library | Pmc | pmc_get_number_of_pmc
Description Reads the number of existing PMC paths (i.e. number of unit).... [read more]
pmc_get_number_of_pmc
Fanuc Focas Library | Pmc | pmc_get_pmc_unit_types
Description Reads the PMC system information that shows what kind of PMC units compose the multi-path PMC system.... [read more]
pmc_get_pmc_unit_types
Fanuc Focas Library | Pmc | pmc_get_timer_type
Description Reads the PMC timer type of the specified timer number.... [read more]
pmc_get_timer_type
Fanuc Focas Library | Pmc | pmc_kpmsiz
Description Reads the maximum size of the extended backup memory.... [read more]
pmc_kpmsiz
Fanuc Focas Library | Pmc | pmc_rdalmmsg
Description Reads the alarm messages from PMC.... [read more]
pmc_rdalmmsg
Fanuc Focas Library | Pmc | pmc_rdcntldata
Description Reads the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
pmc_rdcntldata
Fanuc Focas Library | Pmc | pmc_rdcntlgrp
Description Reads the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
pmc_rdcntlgrp
Fanuc Focas Library | Pmc | pmc_rdkpm
Description Reads the contents of the extended backup memory of PMC specified by "offset", "length". The data are stored in "data"... [read more]
pmc_rdkpm
Fanuc Focas Library | Pmc | pmc_rdkpm2
Description Reads the contents of the extended backup memory of PMC specified by "offset", "length". The data are stored in "data"... [read more]
pmc_rdkpm2
Fanuc Focas Library | Pmc | pmc_rdmsg
Description Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
pmc_rdmsg
Fanuc Focas Library | Pmc | pmc_rdpmcinfo
Description Reads the data information about the attribute of each kind of PMC, the effective range of PMC address, etc.... [read more]
pmc_rdpmcinfo
Fanuc Focas Library | Pmc | pmc_rdpmcparam
Description The PMC parameter(timer, counter, keep relay, and data) is uploaded by the tape format. When you execute this function, change to... [read more]
pmc_rdpmcparam
Fanuc Focas Library | Pmc | pmc_rdpmcrng
Description Reads the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
pmc_rdpmcrng
Fanuc Focas Library | Pmc | pmc_rdpmctitle
Description Reads the PMC title data from PMC. When this function is executed while editing the title data with PMC, the return value... [read more]
pmc_rdpmctitle
Fanuc Focas Library | Pmc | pmc_rdprmstart
Description Starts uploading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To uploading of PMC parameter, this... [read more]
pmc_rdprmstart
Fanuc Focas Library | Pmc | pmc_select_pmc_unit
Description Selects PMC that will be the target of other PMC FOCAS2 function by the unit type.... [read more]
pmc_select_pmc_unit
Fanuc Focas Library | Pmc | pmc_set_timer_type
Description Writes the PMC timer type of the specified timer number.... [read more]
pmc_set_timer_type
Fanuc Focas Library | Pmc | pmc_wrcntldata
Description Writes the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
pmc_wrcntldata
Fanuc Focas Library | Pmc | pmc_wrcntlgrp
Description Writes the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
pmc_wrcntlgrp
Fanuc Focas Library | Pmc | pmc_wrkpm
Description Writes the data to the extended backup memory of PMC specified by "offset", "length". The data must be stored in "data" as... [read more]
pmc_wrkpm
Fanuc Focas Library | Pmc | pmc_wrkpm2
Description Writes the data to the extended backup memory of PMC specified by "offset", "length". The data must be stored in "data" as... [read more]
pmc_wrkpm2
Fanuc Focas Library | Pmc | pmc_wrmsg
Description Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
pmc_wrmsg
Fanuc Focas Library | Pmc | pmc_wrpmcparam
Description The PMC parameter(timer, counter, keep relay, and data) is downloaded by the tape format. When you execute this function, set... [read more]
pmc_wrpmcparam
Fanuc Focas Library | Pmc | pmc_wrpmcrng
Description Writes the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
pmc_wrpmcrng
Fanuc Focas Library | Pmc | pmc_wrprmend
Description End of download of the PMC parameter(timer, counter, keep relay, and data) by the tape format. Even if the PWE of CNC parameter is... [read more]
pmc_wrprmend
Fanuc Focas Library | Pmc | pmc_wrprmstart
Description Starts downloading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To downloading of PMC parameter,... [read more]
pmc_wrprmstart
Modified: 2018-06-11