Writes the data of 32 bytes transmitted to the PMC.
It is necessary to receive the data on the PMC side to write the data.
If the PMC side does not receive the data, the error(Return:EW_BUFFER) is returned.
The data must be stored in the data array.
The meaning of the data can be decided by the each application of the PMC and the MMC.
The outline of each processing is as follows.
|Note)||When the MMC side processing is late, the completion status on the PMC side is <-10>.|
See the "PROGRAMMING MANUAL" of PMC for details of the PMC side processing.
Universal Fanuc Driver
Fanuc Focas Library CD
Arguments : HSSB
Specify the library handle.
See "Library handle" for details.
Specify the data block length of the transmission data.
Specify the pointer to the transmission data storage area.
The array is as follows.
short data ;
|Note)||The order of the data changes places on the MMC side and the PMC side as the following figure in case of PMC-NA.|
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
Data length(length) is wrong.
The PMC side does not receive the data or the reception processing is late, therefore the data cannot be transmitted.
As for the other return codes or the details, see "Return status of Data window function"
For HSSB connection,
This function is not related to CNC parameter.
This function can be used in any CNC mode.
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||X|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.