Writes the data to the extended backup memory of PMC specified by "offset", "length".
The data must be stored in "data" as the same format with PMC.
Universal Fanuc Driver
Fanuc Focas Library CD
Specify the library handle.
See "Library handle" for details.
The top of the extended backup memory is indicated by '0'.
The array is as follows.
char data ;
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
Size of data(length) is wrong.
Start address(offset) is wrong.
This function needs the PMC C language nonvolatile memory expansion or PMC C language nonvolatile memory expansion(256K) option.
As for the other return codes or the details, see "Return status of Data window function"
And this function is related to the following CNC option.
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-F the required CNC option is as follows. When Embedded Ethernet is used,
above two optional functions are not required.
The Ethernet function and the extended driver/library function are necessary.
However, in case of Series 16i/18i/21i-B, 0i-F the required CNC option is as follows.
When Embedded Ethernet is used,
When Ethernet board is used,
- only Ethernet function is required.
This function is not related to CNC parameter.
This function can be used in any CNC mode.
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||X|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.
pmc_rdkpm pmc_rdkpm2 pmc_wrkpm pmc_kpmsiz