News CNCnetPDM About us Support  
       
  

FLIST_PMC | PMC

TOP

PMC: Function related to PMC

Function Name Brief description
pmc_rdmsg Read message from PMC to MMC
pmc_wrmsg Write message from MMC to PMC
pmc_crdmsg Read message from PMC to MMC (conditional)
pmc_cwrmsg Write message from MMC to PMC (conditional)
pmc_rdpmcrng Read PMC data(area specified)
pmc_wrpmcrng Write PMC data(area specified)
pmc_rdkpm Read data from extended backup memory
pmc_wrkpm Write data to extended backup memory
pmc_rdkpm2 Read data from extended backup memory(2)
pmc_wrkpm2 Write data to extended backup memory(2)
pmc_kpmsiz Read maximum size of extended backup memory
pmc_rdpmcinfo Read PMC data information
pmc_rdcntldata Read control data of PMC data table
pmc_wrcntldata Write control data of PMC data table
pmc_rdcntlgrp Read the sum total group of control data
pmc_wrcntlgrp Write the sum total group of control data
pmc_set_timer_type Set the PMC timer accuracy
pmc_get_timer_type Get the PMC timer accuracy
pmc_getdtailerr Get detail error for PMC
pmc_rdalmmsg Read PMC alarm messages
pmc_rdpmctitle Read PMC title data
pmc_rdprmstart Start uploading PMC parameter
pmc_rdpmcparam Upload PMC parameter
pmc_rdprmend End of uploading PMC parameter
pmc_wrprmstart Start downloading PMC parameter
pmc_wrpmcparam Download PMC parameter
pmc_wrprmend End of downloading PMC parameter
pmc_select_pmc_unit Select the PMC
pmc_get_current_pmc_unit Get the current PMC unit type
pmc_get_number_of_pmc Read the number of existing PMC paths
pmc_get_pmc_unit_types Read the PMC system information

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/pmc/flist_pmc

Fanuc Focas Library | Pmc | pmc_crdmsg

Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
Fanuc Focas Library | Pmc | pmc_crdmsg

Fanuc Focas Library | Pmc | pmc_cwrmsg

Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
Fanuc Focas Library | Pmc | pmc_cwrmsg

Fanuc Focas Library | Pmc | pmc_getdtailerr

Gets the detailed error information after the function has been executed. The detailed error information is stored in err_no, err_dtno of... [read more]
Fanuc Focas Library | Pmc | pmc_getdtailerr

Fanuc Focas Library | Pmc | pmc_get_current_pmc_unit

Get the current PMC unit type.... [read more]
Fanuc Focas Library | Pmc | pmc_get_current_pmc_unit

Fanuc Focas Library | Pmc | pmc_get_number_of_pmc

Reads the number of existing PMC paths (i.e. number of unit).... [read more]
Fanuc Focas Library | Pmc | pmc_get_number_of_pmc

Fanuc Focas Library | Pmc | pmc_get_pmc_unit_types

Reads the PMC system information that shows what kind of PMC units compose the multi-path PMC system.... [read more]
Fanuc Focas Library | Pmc | pmc_get_pmc_unit_types

Fanuc Focas Library | Pmc | pmc_get_timer_type

Reads the PMC timer type of the specified timer number.... [read more]
Fanuc Focas Library | Pmc | pmc_get_timer_type

Fanuc Focas Library | Pmc | pmc_kpmsiz

Reads the maximum size of the extended backup memory.... [read more]
Fanuc Focas Library | Pmc | pmc_kpmsiz

Fanuc Focas Library | Pmc | pmc_rdalmmsg

Reads the alarm messages from PMC.... [read more]
Fanuc Focas Library | Pmc | pmc_rdalmmsg

Fanuc Focas Library | Pmc | pmc_rdcntldata

Reads the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
Fanuc Focas Library | Pmc | pmc_rdcntldata

Fanuc Focas Library | Pmc | pmc_rdcntlgrp

Reads the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
Fanuc Focas Library | Pmc | pmc_rdcntlgrp

Fanuc Focas Library | Pmc | pmc_rdkpm

Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]
Fanuc Focas Library | Pmc | pmc_rdkpm

Fanuc Focas Library | Pmc | pmc_rdkpm2

Reads the contents of the extended backup memory of PMC specified by offset, length. The data are stored in data... [read more]
Fanuc Focas Library | Pmc | pmc_rdkpm2

Fanuc Focas Library | Pmc | pmc_rdmsg

Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
Fanuc Focas Library | Pmc | pmc_rdmsg

Fanuc Focas Library | Pmc | pmc_rdpmcinfo

Reads the data information about the attribute of each kind of PMC, the effective range of PMC address, etc.... [read more]
Fanuc Focas Library | Pmc | pmc_rdpmcinfo

Fanuc Focas Library | Pmc | pmc_rdpmcparam

The PMC parameter(timer, counter, keep relay, and data) is uploaded by the tape format. When you execute this function, change to... [read more]
Fanuc Focas Library | Pmc | pmc_rdpmcparam

Fanuc Focas Library | Pmc | pmc_rdpmcrng

Reads the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
Fanuc Focas Library | Pmc | pmc_rdpmcrng

Fanuc Focas Library | Pmc | pmc_rdpmctitle

Reads the PMC title data from PMC. When this function is executed while editing the title data with PMC, the return value... [read more]
Fanuc Focas Library | Pmc | pmc_rdpmctitle

Fanuc Focas Library | Pmc | pmc_rdprmend

End of upload of the PMC parameter(timer, counter, keep relay, and data) by the tape format. This function is executable other... [read more]
Fanuc Focas Library | Pmc | pmc_rdprmend

Fanuc Focas Library | Pmc | pmc_rdprmstart

Starts uploading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To uploading of PMC parameter, this... [read more]
Fanuc Focas Library | Pmc | pmc_rdprmstart

Fanuc Focas Library | Pmc | pmc_select_pmc_unit

Selects PMC that will be the target of other PMC FOCAS2 function by the unit type.... [read more]
Fanuc Focas Library | Pmc | pmc_select_pmc_unit

Fanuc Focas Library | Pmc | pmc_set_timer_type

Writes the PMC timer type of the specified timer number.... [read more]
Fanuc Focas Library | Pmc | pmc_set_timer_type

Fanuc Focas Library | Pmc | pmc_wrcntldata

Writes the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
Fanuc Focas Library | Pmc | pmc_wrcntldata

Fanuc Focas Library | Pmc | pmc_wrcntlgrp

Writes the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
Fanuc Focas Library | Pmc | pmc_wrcntlgrp

Fanuc Focas Library | Pmc | pmc_wrkpm

Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]
Fanuc Focas Library | Pmc | pmc_wrkpm

Fanuc Focas Library | Pmc | pmc_wrkpm2

Writes the data to the extended backup memory of PMC specified by offset, length. The data must be stored in data as... [read more]
Fanuc Focas Library | Pmc | pmc_wrkpm2

Fanuc Focas Library | Pmc | pmc_wrmsg

Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
Fanuc Focas Library | Pmc | pmc_wrmsg

Fanuc Focas Library | Pmc | pmc_wrpmcparam

The PMC parameter(timer, counter, keep relay, and data) is downloaded by the tape format. When you execute this function, set... [read more]
Fanuc Focas Library | Pmc | pmc_wrpmcparam

Fanuc Focas Library | Pmc | pmc_wrpmcrng

Writes the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
Fanuc Focas Library | Pmc | pmc_wrpmcrng

Fanuc Focas Library | Pmc | pmc_wrprmend

End of download of the PMC parameter(timer, counter, keep relay, and data) by the tape format. Even if the PWE of CNC parameter is... [read more]
Fanuc Focas Library | Pmc | pmc_wrprmend

Fanuc Focas Library | Pmc | pmc_wrprmstart

Starts downloading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To downloading of PMC parameter,... [read more]
Fanuc Focas Library | Pmc | pmc_wrprmstart
Modified: 2023-12-05