News CNCnetPDM About us Support  
         
  

PMC_RDKPM2 | PMC

Description

Reads the contents of the extended backup memory of PMC specified by "offset", "length".
The data are stored in "data" with the same format with PMC.

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI pmc_rdkpm2(unsigned short FlibHndl, unsigned long offset,char *data,unsigned long length);

Arguments

FlibHndl   [ in ]

Specify the library handle.
See "Library handle" for details.

offset   [ in ]
Specify the start address.
The top of the extended backup memory is indicated by '0'.
data   [ out ]
Pointer to the data storage area.
The array is as follows.

char data[65535] ;
length   [ in ]
Specify the size of data to be read.

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_NOPMC
(1)
There is no PMC.
EW_LENGTH
(2)
Data block length error
Size of data(length) is wrong.
EW_RANGE
(3)
Address range error
Start address(offset) is wrong.
EW_NOOPT
(6)
No option
This function needs the PMC C language nonvolatile memory expansion or PMC C language nonvolatile memory expansion(256K) option.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

And this function is related to the following CNC option.

    - PMC C language nonvolatile memory expansion

    - PMC C language nonvolatile memory expansion(256KB)

For HSSB connection,

    The extended driver/library function is necessary.

For Ethernet connection,

    The Ethernet function and the extended driver/library function are necessary.

    However, in case of Series 16i/18i/21i-B, 0i-F the required CNC option is as follows.

    When Embedded Ethernet is used,

      above two optional functions are not required.

    When Ethernet board is used,

      only Ethernet function is required.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X X X X X X X X X X O O O H O
T (Turning) X X X X X - X X X X X X O O O H O
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X O O - O
L (Laser) - - O - - O
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

pmc_rdkpm   pmc_wrkpm   pmc_wrkpm2   pmc_kpmsiz  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/pmc/pmc_rdkpm2
Fanuc Focas Library | Pmc | flist_Pmc
PMC: Function related to PMC... [read more]
flist_Pmc
Fanuc Focas Library | Pmc | pmc_crdmsg
Description Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
pmc_crdmsg
Fanuc Focas Library | Pmc | pmc_cwrmsg
Description Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
pmc_cwrmsg
Fanuc Focas Library | Pmc | pmc_getdtailerr
Description Gets the detailed error information after the function has been executed. The detailed error information is stored in "err_no", "err_dtno" of... [read more]
pmc_getdtailerr
Fanuc Focas Library | Pmc | pmc_get_current_pmc_unit
Description Get the current PMC unit type.... [read more]
pmc_get_current_pmc_unit
Fanuc Focas Library | Pmc | pmc_get_number_of_pmc
Description Reads the number of existing PMC paths (i.e. number of unit).... [read more]
pmc_get_number_of_pmc
Fanuc Focas Library | Pmc | pmc_get_pmc_unit_types
Description Reads the PMC system information that shows what kind of PMC units compose the multi-path PMC system.... [read more]
pmc_get_pmc_unit_types
Fanuc Focas Library | Pmc | pmc_get_timer_type
Description Reads the PMC timer type of the specified timer number.... [read more]
pmc_get_timer_type
Fanuc Focas Library | Pmc | pmc_kpmsiz
Description Reads the maximum size of the extended backup memory.... [read more]
pmc_kpmsiz
Fanuc Focas Library | Pmc | pmc_rdalmmsg
Description Reads the alarm messages from PMC.... [read more]
pmc_rdalmmsg
Fanuc Focas Library | Pmc | pmc_rdcntldata
Description Reads the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
pmc_rdcntldata
Fanuc Focas Library | Pmc | pmc_rdcntlgrp
Description Reads the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
pmc_rdcntlgrp
Fanuc Focas Library | Pmc | pmc_rdkpm
Description Reads the contents of the extended backup memory of PMC specified by "offset", "length". The data are stored in "data"... [read more]
pmc_rdkpm
Fanuc Focas Library | Pmc | pmc_rdmsg
Description Reads the data of 32 bytes transmitted from the PMC. It is necessary to transmit the data on the PMC side to read the... [read more]
pmc_rdmsg
Fanuc Focas Library | Pmc | pmc_rdpmcinfo
Description Reads the data information about the attribute of each kind of PMC, the effective range of PMC address, etc.... [read more]
pmc_rdpmcinfo
Fanuc Focas Library | Pmc | pmc_rdpmcparam
Description The PMC parameter(timer, counter, keep relay, and data) is uploaded by the tape format. When you execute this function, change to... [read more]
pmc_rdpmcparam
Fanuc Focas Library | Pmc | pmc_rdpmcrng
Description Reads the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
pmc_rdpmcrng
Fanuc Focas Library | Pmc | pmc_rdpmctitle
Description Reads the PMC title data from PMC. When this function is executed while editing the title data with PMC, the return value... [read more]
pmc_rdpmctitle
Fanuc Focas Library | Pmc | pmc_rdprmend
Description End of upload of the PMC parameter(timer, counter, keep relay, and data) by the tape format. This function is executable other... [read more]
pmc_rdprmend
Fanuc Focas Library | Pmc | pmc_rdprmstart
Description Starts uploading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To uploading of PMC parameter, this... [read more]
pmc_rdprmstart
Fanuc Focas Library | Pmc | pmc_select_pmc_unit
Description Selects PMC that will be the target of other PMC FOCAS2 function by the unit type.... [read more]
pmc_select_pmc_unit
Fanuc Focas Library | Pmc | pmc_set_timer_type
Description Writes the PMC timer type of the specified timer number.... [read more]
pmc_set_timer_type
Fanuc Focas Library | Pmc | pmc_wrcntldata
Description Writes the control data to manage PMC data table (address D). This function is not available at PMC-NA. Refer to the programming... [read more]
pmc_wrcntldata
Fanuc Focas Library | Pmc | pmc_wrcntlgrp
Description Writes the total number of groups of the control data to manage PMC data table(address D). This function is not available at PMC-NA.... [read more]
pmc_wrcntlgrp
Fanuc Focas Library | Pmc | pmc_wrkpm
Description Writes the data to the extended backup memory of PMC specified by "offset", "length". The data must be stored in "data" as... [read more]
pmc_wrkpm
Fanuc Focas Library | Pmc | pmc_wrkpm2
Description Writes the data to the extended backup memory of PMC specified by "offset", "length". The data must be stored in "data" as... [read more]
pmc_wrkpm2
Fanuc Focas Library | Pmc | pmc_wrmsg
Description Writes the data of 32 bytes transmitted to the PMC. It is necessary to receive the data on the PMC side to write the... [read more]
pmc_wrmsg
Fanuc Focas Library | Pmc | pmc_wrpmcparam
Description The PMC parameter(timer, counter, keep relay, and data) is downloaded by the tape format. When you execute this function, set... [read more]
pmc_wrpmcparam
Fanuc Focas Library | Pmc | pmc_wrpmcrng
Description Writes the PMC data of the specified PMC address/range. This function is used to exchange the data between the... [read more]
pmc_wrpmcrng
Fanuc Focas Library | Pmc | pmc_wrprmend
Description End of download of the PMC parameter(timer, counter, keep relay, and data) by the tape format. Even if the PWE of CNC parameter is... [read more]
pmc_wrprmend
Fanuc Focas Library | Pmc | pmc_wrprmstart
Description Starts downloading the PMC parameter(timer, counter, keep relay, and data) of the tape format. To downloading of PMC parameter,... [read more]
pmc_wrprmstart
Modified: 2018-06-11