Reads full path name of the program which is being currently executed in CNC.
When the CNC is stopping, the name of the executed program is acquired.
The program name is stored in "path_name" with maximum 256 character string format.
|path_name||:||'O' number is stored with ASCII code, for example, "//CNC_MEM/USER/PATH1/O123".|
|path_name||:||The program name is stored with ASCII code, for example, "//CNC_MEM/USER/PATH1/ABC".|
When the CNC mode is MDI, "O0" is acquired.
Universal Fanuc Driver
Fanuc Focas Library CD
Specify the library handle. See "Library handle" for details.
Specify the pointer to store the full path name of the program which is being currently selected in CNC.
(The area of 256 bytes is necessary.)
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
As for the other return codes or the details, see "Return status of Data window function"
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 0i-D/F, Series 30i and PMi-A, the required CNC option is as follows. When Embedded Ethernet is used,
above two optional functions are not required.
The Ethernet function and the extended driver/library function are necessary.
However, in case of Series 0i-D/F, Series 30i and PMi-A, the required CNC option is as follows.
When Embedded Ethernet is used,
When Ethernet board is used,
- only Ethernet function is required.
This function is not related to CNC parameter.
This function can be used in any CNC mode.
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||O|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.