Notifies the end of DNC operation to CNC.
Execute this stopping command after the CNC's operation has been completed and reset.
When this command is executed during CNC is operating, the function call waits until the end of operation and reset.
Check "OP" signal(Series 15:F000#5, Series16/18/21, 16i/18i/21i,0i, Power Mate i:F000#7) to find whether CNC has been reset or not.
When "OP" signal is "0", CNC is has been reset.
There are cases where error(EW_DATA) during execution of downloading DNC program is returned by this function.
Universal Fanuc Driver
Fanuc Focas Library CD
Arguments : HSSB
Specify the library handle.
See "Library handle" for details.
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
As for the other return codes or the details, see "Return status of Data window function"
For HSSB connection,
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
0000#0 (influenced by setting)
8706#0 (influenced by setting) (This parameter is effective only in path 1. Set 0 except the 1st path.)
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||X|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.