Reads the Ethernet board inforamtion in CNC.
Universal Fanuc Driver
Fanuc Focas Library CD
Arguments : Ethernet
Specify the library handle. See "Library handle" for details.
Specify the pointer to the variable by which the communication type of the Ethernet board is stored.
|1||:||Ethernet Board or Data Server Board|
|2||:||Fast Ethernet Board or Fast Data Server Board|
|3||:||Embedded Ethernet (Built-in)|
|4||:||Embedded Ethernet (PCMCIA)|
|5||:||Windows NT/2000 Ethernet Server|
|6||:||Windows CE Ethernet Server|
Specify the pointer to the variable by which the kind of the storage device of Data Server is stored.
This data is effective only at "type=1,2".
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
The NC control software or the Ethernet firmware does not support this function.
As for the other return codes or the details, see "Return status of Data window function"
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows. When Embedded Ethernet is used,
above two optional functions are not required.
The Ethernet function and the extended driver/library function are necessary.
However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows.
When Embedded Ethernet is used,
When Ethernet board is used,
- only Ethernet function is required.
When FL-net board is used,
- FL-net/Ethernet coexisting function, FL-net function and Ethernet function is required.
This function is not related to CNC parameter.
This function can be used in any CNC mode.
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||E|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.