Reads the maximum size of the SRAM variable area for C language executor. The maximum size is read by the unit of byte.
Universal Fanuc Driver
Fanuc Focas Library CD
Specify the library handle. See "Library handle" for details.
Pointer to the maximum size storage area.
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
The user application is not built into CNC.
The C language executor library does not support this function.
The C language executor function and the extended driver/library function are necessary.
As for the other return codes or the details, see "Return status of Data window function"
This function need the following CNC option.
And this function is related to the following CNC option.
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-D/F, Series 30i and PMi-A the required CNC option is as follows. When Embedded Ethernet is used,
above two optional functions are not required.
The Ethernet function and the extended driver/library function are necessary.
However, in case of Series 16i/18i/21i-B, 0i-D/F, Series 30i and PMi-A the required CNC option is as follows.
When Embedded Ethernet is used,
When Ethernet board is used,
- only Ethernet function is required.
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
This function can be used in any CNC mode.
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||O|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.