CNC: Function Reference related to library handle, node
| Function Name | Brief description |
|---|---|
| cnc_rdnodenum | Read the number of node |
| cnc_rdnodeinfo | Read the information of node |
| cnc_setdefnode | Set the default node number |
| cnc_allclibhndl | Allocate library handle |
| cnc_allclibhndl2 | Allocate the library handle(for multi-connection) |
| cnc_allclibhndl3 | Get the library handle |
| cnc_freelibhndl | Free library handle |
| cnc_settimeout | Set timeout interval |
| cnc_getlibopt | Get a library option |
| cnc_setlibopt | Set a library option |
CNC: Function related to controlled axis/spindle
| Function Name | Brief description |
|---|---|
| cnc_actf | Read actual axis feedrate(F) |
| cnc_absolute | Read absolute axis position |
| cnc_absolute2 | Read absolute axis position 2 |
| cnc_machine | Read machine axis position |
| cnc_relative | Read relative axis position |
| cnc_relative2 | Read relative axis position 2 |
| cnc_distance | Read distance to go |
| cnc_rdposition | Read position information |
| cnc_rdaxisdata | Read various data relating servo axis or spindle axis |
| cnc_skip | Read skip position |
| cnc_srvdelay | Read servo delay value |
| cnc_accdecdly | Read acceleration/deceleration delay value |
| cnc_rddynamic | Read all dynamic data |
| cnc_rddynamic2 | Read all dynamic data (2) |
| cnc_acts | Read actual spindle speed(S) |
| cnc_acts2 | Read actual spindle speed(S) (2) |
| cnc_rdspcss | Read constant surface speed data |
| cnc_rdspeed | Read speed information |
| cnc_wrrelpos | Set origin/preset relative axis position |
| cnc_prstwkcd | Preset work coordinate |
| cnc_rdmovrlap | Read manual overlapped motion value |
| cnc_canmovrlap | Cancel manual overlapped motion value |
| cnc_rdhndintrpt | Read manual overlapped motion information |
| cnc_rdspload | Read load information of serial spindle |
| cnc_rdspmaxrpm | Read maximum r.p.m. ratio of serial spindle |
| cnc_rdspgear | Read gear ratio of serial spindle |
| cnc_rdsvmeter | Read servo load meter |
| cnc_rdspmeter | Read spindle load meter |
| cnc_rd3dtooltip | Read tool tip coordinates for 3-dimensional handle feed |
| cnc_rd3dpulse | Read handle interrupt pulse amount for 3-dimensional handle feed |
| cnc_rd3dmovrlap | Read handle interrupt move amount for 3-dimensional handle feed |
| cnc_rd3dofschg | Read the modification of tool length compensation amount in tool axis dir. for 3-dimensional handle feed |
| cnc_clr3dplsmov | Clear handle interrupt pulse and move amount for 3-dimensional handle feed |
| cnc_rdaxisname | Read axis name |
| cnc_exaxisname | Read the name of controlled axis and spindle name |
| cnc_rdspdlname | Read spindle name |
| cnc_rd5axmandt | Read the data for the manual feed for 5-axis machining |
| cnc_rd5axovrlap | Read the machine axis movement for the manual feed for 5-axis machining |
| cnc_clr5axpls | Clear the pulse amount for manual feed for 5-axis machining |
CNC: Function related to CNC program
| Function Name | Brief description |
|---|---|
| cnc_dwnstart | Start downloading NC program |
| cnc_download | Download NC program |
| cnc_cdownload | Download NC program(conditional) |
| cnc_dwnend | End of downloading NC program |
| cnc_dwnstart3 | Start downloading NC program (3) |
| cnc_download3 | Download NC program (3) |
| cnc_dwnend3 | End of downloading NC program (3) |
| cnc_dwnstart4 | Start downloading NC program (4) |
| cnc_download4 | Download NC program (4) |
| cnc_dwnend4 | End of downloading NC program (4) |
| cnc_vrfstart | Start verification of NC program |
| cnc_verify | Verify NC program |
| cnc_cverify | Verify NC program(conditional) |
| cnc_vrfend | End of verification |
| cnc_vrfstart4 | Start verification of NC program(4) |
| cnc_verify4 | Verify NC program(4) |
| cnc_vrfend4 | End of verification(4) |
| cnc_buff | Read buffer status for downloading/verification NC program |
| cnc_dncstart | Start downloading DNC program |
| cnc_dnc | Download DNC program |
| cnc_cdnc | Download DNC program(conditional) |
| cnc_dncend | End of downloading DNC program |
| cnc_dncstart2 | Start downloading DNC program (2) |
| cnc_dnc2 | Download DNC program (2) |
| cnc_dncend2 | End of downloading DNC program (2) |
| cnc_rddncdgndt | Read the diagnosis data of downloading DNC program |
| cnc_upstart | Start uploading NC program |
| cnc_upload | Upload NC program |
| cnc_cupload | Upload NC program(conditional) |
| cnc_upend | End of uploading NC program |
| cnc_upstart3 | Start uploading NC program (3) |
| cnc_upload3 | Upload NC program (3) |
| cnc_upend3 | End of uploading NC program (3) |
| cnc_upstart4 | Start uploading NC program (4) |
| cnc_upload4 | Upload NC program (4) |
| cnc_upend4 | End of uploading NC program (4) |
| cnc_search | Search specified program |
| cnc_delall | Delete all programs |
| cnc_delete | Delete specified program |
| cnc_delrange | Delete specified program(area specified) |
| cnc_rdprogdir | Read program directory |
| cnc_rdprogdir2 | Read program directory (2) |
| cnc_rdprogdir3 | Read program directory (3) |
| cnc_rdprogdir4 | Read program directory (4) |
| cnc_rdproginfo | Read program information |
| cnc_rdprgnum | Read program number under execution |
| cnc_exeprgname | Read program name under execution |
| cnc_rdseqnum | Read sequence number under execution |
| cnc_seqsrch | Search specified sequence number |
| cnc_seqsrch2 | Search specified sequence number(2) |
| cnc_rewind | Rewind cursor of NC program |
| cnc_rdblkcount | Read block counter |
| cnc_rdexecprog | Read program under execution |
| cnc_wrmdiprog | Write program for MDI operation |
| cnc_rdmdipntr | Read execution pointer for MDI operation |
| cnc_wrmdipntr | Write execution pointer for MDI operation |
| cnc_rdmdiprgstat | Get MDI program information |
| cnc_rdproctime | Read processing time stamp data |
| cnc_rdprgdirtime | Read directory for processing time stamp data |
| cnc_copyprog | Copy program |
| cnc_mergeprog | Merge program |
| cnc_renameprog | Change program number |
| cnc_condense | Condense program |
| cnc_rdprogline | Read NC program by line basis |
| cnc_rdprogline2 | Read NC program by line basis(2) |
| cnc_wrprogline | Write NC program by line basis |
| cnc_delprogline | Delete NC program by line basis |
| cnc_searchword | Search string in NC program |
| cnc_searchresult | Get result of string search in NC program |
| cnc_setpglock | Set the protection of running/editing of NC program |
| cnc_resetpglock | Reset the protection of running/editing of NC program |
| cnc_rdpglockstat | Get the status of running/editing of NC program |
| cnc_rdactpt | Get execution pointer |
| cnc_wractpt | Set execution pointer |
| cnc_rdexecpt | Read execution pointer |
| cnc_rdpdf_drive | Read information of Program memory drive |
| cnc_rdpdf_inf | Read information Program memory file |
| cnc_rdpdf_curdir | Read information of current folder |
| cnc_wrpdf_curdir | Set current folder |
| cnc_rdpdf_subdir | Read information of subfolder |
| cnc_rdpdf_alldir | Read file information |
| cnc_rdpdf_subdirn | Read number of subfolders or files |
| cnc_pdf_add | Create folder or file |
| cnc_pdf_del | Delete folder or file |
| cnc_pdf_delall | |
| cnc_pdf_rename | Rename folder or file |
| cnc_pdf_copy | Copy file |
| cnc_pdf_move | Move file |
| cnc_pdf_cond | Rearrange the contents of the program |
| cnc_wrpdf_attr | Change attribute of folder or file |
| cnc_pdf_rdmain | Read main program |
| cnc_pdf_slctmain | Select main program |
| cnc_rdpdf_line | Read NC program by line basis(For arbitrary file name) |
| cnc_wrpdf_line | Write NC program by line basis(For arbitrary file name) |
| cnc_pdf_delline | Delete NC program by line basis(For arbitrary file name) |
| cnc_pdf_searchword | Search string in NC program(For arbitrary file name) |
| cnc_pdf_searchresult | Get result of string search in NC program(For arbitrary file name) |
| cnc_pdf_rdactpt | Get execution pointer(For arbitrary file name) |
| cnc_pdf_wractpt | Set execution pointer(For arbitrary file name) |
CNC: Function related to CNC file data
| Function Name | Brief description |
|---|---|
| cnc_rdtofs | Read tool offset value |
| cnc_wrtofs | Write tool offset value |
| cnc_rdtofsr | Read tool offset value(area specified) |
| cnc_wrtofsr | Write tool offset value(area specified) |
| cnc_rdtofsinfo | Read tool offset information |
| cnc_rdtofsinfo2 | Read tool offset information (2) |
| cnc_tofs_rnge | Read the effective setting range of tool offset value |
| cnc_rdzofs | Read work zero offset value |
| cnc_wrzofs | Write work zero offset value |
| cnc_rdzofsr | Read work zero offset value(area specified) |
| cnc_wrzofsr | Write work zero offset value(area specified) |
| cnc_rdzofsinfo | Read work zero offset information |
| cnc_zofs_rnge | Read the effective setting range of work zero offset value |
| cnc_rdparam | Read parameter |
| cnc_wrparam | Write parameter |
| cnc_rdparam3 | Read parameter(3) |
| cnc_rdparar | Read parameter(area specified) |
| cnc_wrparas | Write parameter(area specified) |
| cnc_rdparam_ext | Read random number parameters |
| cnc_rdhsprminfo | Get information for high-speed read of parameter |
| cnc_rdhsparam | High-speed read of parameter |
| cnc_rdparainfo | Read parameter information |
| cnc_rdparanum | Read minimum, maximum, total number of parameter |
| cnc_rdset | Read setting data |
| cnc_wrset | Write setting data |
| cnc_rdsetr | Read setting data(area specified) |
| cnc_wrsets | Write setting data(area specified) |
| cnc_rdsetinfo | Read setting data information |
| cnc_rdsetnum | Read minimum, maximum, total number of setting data |
| cnc_rdpitchr | Read pitch error compensation data(area specified) |
| cnc_wrpitchr | Write pitch error compensation data(area specified) |
| cnc_rdpitchinfo | Read pitch error compensation data information |
| cnc_rdvolc | Read 3-dimensional error compensation data |
| cnc_wrvolc | Write 3-dimensional error compensation data |
| cnc_rdvolccomp | Read 3-dimensional error compensation value at current position |
| cnc_rdmacro | Read custom macro variable |
| cnc_wrmacro | Write custom macro variable |
| cnc_rdmacror | Read custom macro variables(area specified) |
| cnc_wrmacror | Write custom macro variables(area specified) |
| cnc_rdmacror2 | Read custom macro variables(double precision) |
| cnc_wrmacror2 | Write custom macro variables(double precision) |
| cnc_rdmacroinfo | Read custom macro variable information |
| cnc_getmactype | Get type of custom macro variable |
| cnc_setmactype | Set type of custom macro variable |
| cnc_rdpmacro | Read P code macro variable |
| cnc_wrpmacro | Write P code macro variable |
| cnc_rdpmacror | Read P code macro variables(area specified) |
| cnc_rdpmacror2 | Read P code macro variables(double precision) |
| cnc_wrpmacror | Write P code macro variables(area specified) |
| cnc_wrpmacror2 | Write P code macro variables(double precision) |
| cnc_rdpmacroinfo | Read P code macro variable information |
| cnc_rdpmacroinfo2 | Read P code macro variable information(2) |
| cnc_getpmactype | Get type of P code macro variable |
| cnc_setpmactype | Set type of P code macro variable |
| cnc_rdmgrpdata | Read M code group data |
| cnc_wrmgrpdata | Write M code group data |
| cnc_rdexecmcode | Read M code group data(executing,executed M code) |
| cnc_rdrstrmcode | Read M code group data(for program restart) |
| cnc_rdhpccset | Read setting data for High-speed and high-precision machining |
| cnc_wrhpccset | Write setting data for HPCC |
| cnc_hpccatset | Set setting data for HPCC automatically |
| cnc_rdhpcctupr | Read tuning data(parameter input) for HPCC |
| cnc_wrhpcctupr | Write tuning data(parameter input) for HPCC |
| cnc_rdhpcctuac | Read tuning data(acc./dec. input) for HPCC |
| cnc_wrhpcctuac | Write tuning data(acc./dec. input) for HPCC |
| cnc_hpccattune | Tune up tuning data for HPCC automatically |
| cnc_hpccactfine | Read fine level for HPCC |
| cnc_hpccselfine | Select fine level for HPCC |
| cnc_rdactfixofs | Read active fixture offset |
| cnc_rdfixofs | Read fixture offset value(area specified) |
| cnc_wrfixofs | Write fixture offset value(area specified) |
| cnc_rdintchk | Read interference check data(area specified) |
| cnc_wrintchk | Write interference check data(area specified) |
| cnc_rdintinfo | Read interference check data information |
| cnc_rdwkcdshft | Read work coordinate shift value |
| cnc_wrwkcdshft | Write work coordinate shift value |
| cnc_rdwkcdsfms | Read work coordinate shift measured value |
| cnc_wrwkcdsfms | Write work coordinate shift measured value |
| cnc_wksft_rnge | Read the effective setting range of work coordinate shift value |
| cnc_rdbtofsr | Read tool offset value for B axis(area specified) |
| cnc_wrbtofsr | Write tool offset value for B axis(area specified) |
| cnc_rdbtofsinfo | Read tool offset information for B axis |
| cnc_rdbaxis | Read command data for B axis |
CNC: Function related to tool life management data
| Function Name | Brief description |
|---|---|
| cnc_rdgrpid | Read tool life management data(tool group number) |
| cnc_rdgrpid2 | Read tool life management data(tool group number) 2 |
| cnc_rdngrp | Read tool life management data(number of tool groups) |
| cnc_rdntool | Read tool life management data(number of tools) |
| cnc_rdlife | Read tool life management data(tool life) |
| cnc_rdcount | Read tool life management data(tool life counter) |
| cnc_rd1length | Read tool life management data(tool length number-1) |
| cnc_rd2length | Read tool life management data(tool length number-2) |
| cnc_rd1radius | Read tool life management data(cutter compensation num.-1) |
| cnc_rd2radius | Read tool life management data(cutter compensation num.-2) |
| cnc_t1info | Read tool life management data(tool information-1) |
| cnc_t2info | Read tool life management data(tool information-2) |
| cnc_toolnum | Read tool life management data(tool number) |
| cnc_rdtoolrng | Read tool life management data(tool number, tool life, tool life counter)(area specified) |
| cnc_rdtoolgrp | Read tool life management data(all data within group) |
| cnc_wrcountr | Write tool life management data(tool life counter)(area specified) |
| cnc_rdusegrpid | Read tool life management data(used tool group number) |
| cnc_rdmaxgrp | Read tool life management data(max. number of tool groups) |
| cnc_rdmaxtool | Read tool life management data(max. number of tool within group) |
| cnc_rdusetlno | Read tool life management data(used tool number within group) |
| cnc_rd1tlifedata | Read tool life management data(tool data1) |
| cnc_rd1tlifedat2 | Read tool life management data(tool data1) 2 |
| cnc_rd2tlifedata | Read tool life management data(tool data2) |
| cnc_wr1tlifedata | Write tool life management data(tool data1) |
| cnc_wr1tlifedat2 | Write tool life management data(tool data1) 2 |
| cnc_wr2tlifedata | Write tool life management data(tool data2) |
| cnc_rdgrpinfo | Read tool life management data(tool group information) |
| cnc_rdgrpinfo2 | Read tool life management data(tool group information 2) |
| cnc_rdgrpinfo3 | Read tool life management data(tool group information 3) |
| cnc_rdgrpinfo4 | Read tool life management data(tool group information 4) |
| cnc_wrgrpinfo | Write tool life management data(tool group information) |
| cnc_wrgrpinfo2 | Write tool life management data(tool group information 2) |
| cnc_wrgrpinfo3 | Write tool life management data(tool group information 3) |
| cnc_deltlifegrp | Delete tool life management data(tool group) |
| cnc_instlifedt | Insert tool life management data(tool data) |
| cnc_deltlifedt | Delete tool life management data(tool data) |
| cnc_clrcntinfo | Clear tool life management data(tool life counter, tool information)(area specified) |
| cnc_rdtlinfo | Read tool life management data(maximum number of tool groups, maximum number of tool within group, maximum number of life count) |
| cnc_rdtlusegrp | Read tool life management data(next/current/last used tool group number) |
| cnc_rdtlgrp | Read tool life management data(tool group information) (area specified) |
| cnc_rdtltool | Read tool life management data(tool data) (area specified) |
| cnc_rdexchgtgrp | Read tool life management data(Exchange necessary tool group number) |
CNC: Function related to tool management data
| Function Name | Brief description |
|---|---|
| cnc_regtool | New registration of Tool management data |
| cnc_regtool_f2 | New registration of Tool management data (2) |
| cnc_deltool | Delete Tool management data |
| cnc_rdtool | Read Tool management data |
| cnc_rdtool_f2 | Read Tool management data (2) |
| cnc_wrtool | Write Tool management data |
| cnc_wrtool_f2 | Write Tool management data (2) |
| cnc_wrtool2 | Write individual data of Tool management data |
| cnc_regmagazine | New registration of Magazine management data |
| cnc_delmagazine | Delete Magazine management data |
| cnc_rdmagazine | Read Magazine management data |
| cnc_wrmagazine | Write individual data of Magazine management data |
CNC: Function related to history data
| Function Name | Brief description |
|---|---|
| cnc_stopophis | Stop logging operation history data |
| cnc_startophis | Restart logging operation history data |
| cnc_rdophisno | Read number of operation history data |
| cnc_rdophistry | Read operation history data |
| cnc_rdophistry2 | Read operation history data (2) |
| cnc_rdophistry4 | Read operation history data (4) |
| cnc_clearophis | Clear operation history data |
| cnc_rdhissgnl | Read signals related operation history |
| cnc_wrhissgnl | Write signals related operation history |
| cnc_rdhissgnl2 | Read signals related operation history(2) |
| cnc_wrhissgnl2 | Write signals related operation history(2) |
| cnc_rdhissgnl3 | Read signals related operation history(3) |
| cnc_wrhissgnl3 | Write signals related operation history(3) |
| cnc_wrkeyhistry | Record of key stroke |
| cnc_rdalmhisno | Read number of alarm history data |
| cnc_rdalmhistry | Read alarm history data |
| cnc_rdalmhistry2 | Read alarm history data (2) |
| cnc_rdalmhistry5 | Read alarm history data (5) |
| cnc_stopomhis | Stop logging external operator's message history data |
| cnc_startomhis | Restart logging external operator's message history data |
| cnc_rdomhisinfo | Read external operator's message history data information |
| cnc_rdomhisno | Read number of external operator's message history data |
| cnc_rdomhistry | Read external operator's message history data |
| cnc_rdomhistry2 | Read external operator's message history data (2) |
| cnc_clearomhis | Clear external operator's message history data |
CNC: Function related to servo/spindle
| Function Name | Brief description |
|---|---|
| cnc_rdloopgain | Read loop gain for servo adjustment |
| cnc_rdcurrent | Read real current for servo adjustment |
| cnc_rdsrvspeed | Read real speed for servo adjustment |
| cnc_rdnspdl | Read number of spindle |
| cnc_rdopmode | Read operation mode for spindle setting |
| cnc_rdposerrs | Read position deflection S for spindle adjustment |
| cnc_rdposerrs2 | Read position deflection S1,S2 for spindle adjustment(synchronous control mode) |
| cnc_rdposerrz | Read position deflection Z of tapping axis for spindle adjustment(rigid tapping mode) |
| cnc_rdsynerrsy | Read synchronous error for spindle adjustment(synchronous control mode) |
| cnc_rdsynerrrg | Read synchronous error for spindle adjustment(rigid tapping mode) |
| cnc_rdspdlalm | Read spindle alarm for spindle monitor |
| cnc_rdctrldi | Read control input signal for spindle monitor |
| cnc_rdctrldo | Read control output signal for spindle monitor |
CNC: Function related to waveform diagnosis
| Function Name | Brief description |
|---|---|
| cnc_rdwaveprm | Read waveform diagnosis parameter |
| cnc_rdwaveprm2 | Read waveform diagnosis parameter (2) |
| cnc_wrwaveprm | Write waveform diagnosis parameter |
| cnc_wrwaveprm2 | Write waveform diagnosis parameter (2) |
| cnc_wavestart | Start sampling waveform diagnosis data |
| cnc_wavestop | Stop sampling waveform diagnosis data |
| cnc_wavestat | Read sampling status of waveform diagnosis data |
| cnc_rdwavedata | Read waveform diagnosis data |
CNC: Function related to PUNCH PRESS
| Function Name | Brief description |
|---|---|
| cnc_rdtlctldata | Read tool control data |
| cnc_wrtlctldata | Write tool control data |
| cnc_rdtoolinfo | Read tool information data |
| cnc_rdtooldata | Read tool data |
| cnc_wrtooldata | Write tool data |
| cnc_rdmultitldt | Read multiple tool data |
| cnc_wrmultitldt | Write multiple tool data |
| cnc_rdsafetyzone | Read safety zone data |
| cnc_wrsafetyzone | Write safety zone data |
| cnc_rdtoolzone | Read tool zone data |
| cnc_wrtoolzone | Write tool zone data |
| cnc_rdacttlzone | Read actual tool zone data |
| cnc_rdsetzone | Read number of automatic setting zone |
| cnc_wrsetzone | Write number of automatic setting zone |
CNC: Function related to LASER
| Function Name | Brief description |
|---|---|
| cnc_rdpscdproc | Read cutting condition file(cutting data) |
| cnc_wrpscdproc | Write cutting condition file(cutting data) |
| cnc_rdpscdpirc | Read cutting condition file(piercing data) |
| cnc_wrpscdpirc | Write cutting condition file(piercing data) |
| cnc_rdpscdedge | Read cutting condition file(edge cutting data) |
| cnc_wrpscdedge | Write cutting condition file(edge cutting data) |
| cnc_rdpscdslop | Read cutting condition file(slope control data) |
| cnc_wrpscdslop | Write cutting condition file(slope control data) |
| cnc_rdlpwrdty | Read duty data for power control |
| cnc_wrlpwrdty | Write duty data for power control |
| cnc_rdlpwrdat | Read laser power data |
| cnc_rdlpwrcpst | Read power compensation coefficient |
| cnc_wrlpwrcpst | Write power compensation coefficient |
| cnc_rdlagslt | Read assist gas selection |
| cnc_wrlagslt | Write assist gas selection |
| cnc_rdlagst | Read assist gas flow |
| cnc_wrlagst | Write assist gas flow |
| cnc_rdledgprc | Read laser power for contouring |
| cnc_wrledgprc | Write laser power for contouring |
| cnc_rdlprcprc | Read laser power for piercing |
| cnc_wrlprcprc | Write laser power for piercing |
| cnc_rdlcmddat | Read command data of laser |
| cnc_rdldsplc | Read command data of reference displace |
| cnc_wrldsplc | Write command data of reference displace |
| cnc_rdlerrz | Read error of Z-axis tracing |
| cnc_rdlactnum | Read active cutting number/piercing number/slope number |
| cnc_rdlcmmt | Read comment data |
| cnc_rdlpwrslt | Read laser power selection |
| cnc_wrlpwrslt | Write laser power selection |
| cnc_rdlpwrctrl | Read laser power control |
| cnc_wrlpwrctrl | Write laser power control |
CNC: Function related to WIRE CUT
| Function Name | Brief description |
|---|---|
| cnc_setvrtclpos | Set wire vertical position |
| cnc_rdmsptype | Read the measured point type data |
| cnc_wrmsptype | Write the measured point type data |
CNC: Function Reference related to data server,DNC1,DNC2,OSI-Ethernet
| Function Name | Brief description |
|---|---|
| cnc_dtsvftpget | Transfer file from host to DATA SERVER |
| cnc_dtsvftpput | Transfer file from DATA SERVER to host |
| cnc_dtsvftpstat | Read status of file transfer between host and DATA SERVER |
| cnc_dtsvrdpgdir | Read directory in DATA SERVER |
| cnc_dtsvdelete | Delete file in DATA SERVER |
| cnc_dtsvdownload | Download from DATA SERVER to CNC |
| cnc_dtsvupload | Upload from CNC to DATA SERVER |
| cnc_dtsvcnclupdn | Cancel upload/download between DATA SERVER and CNC |
| cnc_dtsvupdnstat | Read upload/download status between DATA SERVER and CNC |
| cnc_dtsvgetdncpg | Get DNC operation file name in DATA SERVER |
| cnc_dtsvsetdncpg | Set DNC operation file name in DATA SERVER |
| cnc_dtsvrdset | Read setting data for DATA SERVER |
| cnc_dtsvwrset | Write setting data for DATA SERVER |
| cnc_dtsvchkdsk | Check hard disk on DATA SERVER |
| cnc_dtsvhdformat | Format hard disk on DATA SERVER |
| cnc_dtsvsavecram | Save I/F buffer for DATA SERVER |
| cnc_dtsvrdcram | Read I/F buffer for DATA SERVER |
| cnc_dtsvmntinfo | Read maintenance information for DATA SERVER |
| cnc_dtsvgetmode | Get mode of DATA SERVER |
| cnc_dtsvsetmode | Set mode of DATA SERVER |
| cnc_dtsvrderrmsg | Read error message for DATA SERVER |
| cnc_dtsvwrfile | Transfer file from personal computer to DATA SERVER |
| cnc_dtsvrdfile | Transfer file from DATA SERVER to personal computer |
| cnc_rddncfname | Read DNC file name for DNC1, DNC2, OSI-Ethernet |
| cnc_wrdncfname | Write DNC file name for DNC1, DNC2 ,OSI-Ethernet |
| cnc_rdcomparam | Read communication parameter for DNC1, DNC2 , OSI-Ethernet |
| cnc_wrcomparam | Write communication parameter for DNC1, DNC2, OSI-Ethernet |
| cnc_rdcomlogmsg | Read logging message for DNC2 |
| cnc_rdcomopemsg | Read operator's message for DNC1,DNC2 |
| cnc_rdrcvmsg | Read receipt message for OSI-Ethernet |
| cnc_rdsndmsg | Read sending message for OSI-Ethernet |
| cnc_sendmessage | Send message for OSI-Ethernet |
| cnc_clrmsgbuff | Clear message buffer for OSI-Ethernet |
| cnc_rdrcvstat | Read receipt status of message for OSI-Ethernet |
| etb_rdparam | Get Ethernet board parameter |
| etb_wrparam | Set Ethernet board parameter |
| etb_rderrmsg | Get error message of Ethernet board |
| ds_rdmode | Get DATA SERVER mode |
| ds_wrmode | Set DATA SERVER mode |
| ds_rdhddinfo | Get hard disk information of DATA SERVER |
| ds_rdhdddir | Get hard disk file list of DATA SERVER |
| ds_delhddfile | Delete hard disk file of DATA SERVER |
| ds_copyhddfile | Copy hard disk file of DATA SERVER |
| ds_renhddfile | Change of hard disk file name of DATA SERVER |
| ds_puthddfile | PUT of hard disk file of DATA SERVER |
| ds_mputhddfile | MPUT of hard disk file of DATA SERVER |
| ds_rdhostinfo | Get host login directory information of DATA SERVER |
| ds_rdhostdir | Get host file list of DATA SERVER |
| ds_rdhostdir2 | Get host file list of DATA SERVER (2) |
| ds_delhostfile | Delete host file of DATA SERVER |
| ds_gethostfile | GET of host file of DATA SERVER |
| ds_mgethostfile | MGET of host file of DATA SERVER |
| ds_rdresult | Get execution result of function of DATA SERVER |
| ds_cancel | Stop function for DATA SERVER |
| ds_rdncfile | Input of NC file in DATA SERVER |
| ds_rdncfile2 | Input of NC file in DATA SERVER (2) |
| ds_wrncfile | Output of NC file in DATA SERVER |
| ds_rdfile | Input of NC file in DATA SERVER (DATA SERVER -> PC) |
| ds_wrfile | Output of NC file in DATA SERVER (PC -> DATA SERVER) |
| ds_rddnchddfile | Get hard disk file name of DATA SERVER for DNC operation |
| ds_wrdnchddfile | Set hard disk file name of DATA SERVER for DNC operation |
| ds_rddnchostfile | Get host file name of DATA SERVER for DNC operation |
| ds_wrdnchostfile | Set host file name of DATA SERVER for DNC operation |
| ds_rdhostno | Get connected host of DATA SERVER |
| ds_wrhostno | Set connects host of DATA SERVER |
| ds_rdmntinfo | Get maintenance information of DATA SERVER |
| ds_checkhdd | Check of hard disk of DATA SERVER |
| ds_formathdd | Format of hard disk of DATA SERVER |
| ds_makehdddir | Make hard disk directory of DATA SERVER |
| ds_delhdddir | Delete hard disk directory of DATA SERVER |
| ds_chghdddir | Change of current directory of hard disk of DATA SERVER |
| ds_lputhddfile | LIST-PUT of hard disk file of DATA SERVER |
| ds_ldelhddfile | LIST-DELETE of hard disk file of DATA SERVER |
| ds_lgethostfile | LIST-GET of host file of DATA SERVER |
| ds_rdm198hdddir | Get directory of DATA SERVER for M198 operation |
| ds_wrm198hdddir | Set directory of DATA SERVER for M198 operation |
| ds_rdm198host | Get connected host of DATA SERVER for M198 operation |
| ds_wrm198host | Set connects host of DATA SERVER for M198 operation |
| ds_searchword | Search string in NC program in DATA SERVER |
| ds_searchresult | Get result of string search in NC program in DATA SERVER |
| ds_dwnstart | Start downloading to DATA SERVER |
| ds_download | Download to DATA SERVER |
| ds_dwnend | End of downloading to DATA SERVER |
| eth_rdparam | Get the parameter of Ethernet |
| eth_wrparam | Set the parameter of Ethernet |
| eth_rddsmode | Get the mode of DATA SERVER |
| eth_wrdsmode | Set the mode of DATA SERVER |
| eth_rddsstate | Get the maintenance information on DATA SERVER |
| eth_rdhost | Get the connection host number of Ethernet |
| eth_wrhost | Set the connection host number of Ethernet |
| eth_rddsm198dir | Get the connection host number of Ethernet |
| eth_wrdsm198dir | Set the connection host number of Ethernet |
| eth_rddsm198host | Get the folder for M198 operation of DATA SERVER |
| eth_wrdsm198host | Set the folder for M198 operation of DATA SERVER |
| eth_rddsformat | Get the format form of the ATA card of DATA SERVER |
| eth_dsformat | Format of the ATA card of DATA SERVER |
| eth_dschkdsk | Check disk of the ATA card of DATA SERVER |
| cnc_rddsdncfile | Get file for DNC operation |
| cnc_wrdsdncfile | Set file for DNC operation |
| cnc_rddsdevinfo | Get memory device information on DATA SERVER |
| cnc_rddsdir | Get current folder |
| cnc_rddsfile | Get file list information |
| cnc_dsmkdir | Make folder |
| cnc_dsrmdir | Delete folder |
| cnc_dsremove | Delete file |
| cnc_dschdir | Change current foledr |
| cnc_dsrename | Change folder name or file name |
| cnc_dscopyfile | Copy file of DATA SERVER |
| cnc_dsget_req | Start GET of DATA SERVER |
| cnc_dsput_req | Start PUT of DATA SERVER |
| cnc_dsmget_req | Start MGET of DATA SERVER |
| cnc_dsmput_req | Start MPUT of DATA SERVER |
| cnc_dslistget_req | Start List-GET of DATA SERVER |
| cnc_dslistput_req | Start List-PUT of DATA SERVER |
| cnc_dslistdel_req | Start List-DEL of DATA SERVER function |
| cnc_dsftpstat | Read file transfer result of DATA SERVER |
| cnc_dsftpcancel | Stop file transfer of DATA SERVER |
CNC: Function Reference related to servo learning data
| Function Name | Brief description |
|---|---|
| cnc_svdtstartrd | Start of reading servo learning data |
| cnc_svdtrddata | Reading of the data from I/F buffer for the servo learning data |
| cnc_svdtendrd | End of reading servo learning data |
| cnc_svdtstartwr | Start of writing servo learning data |
| cnc_svdtwrdata | Writing of the data to I/F buffer for the servo learning data |
| cnc_svdtendwr | End of writing servo learning data |
| cnc_svdtstopexec | Stop of reading/writing of the servo learning data |
CNC: Function related to Fast Ethernet Unsilocited messaging function
| Function Name | Brief description |
|---|---|
| cnc_wrunsolicprm | Set the unsolicited messaging parameters |
| cnc_wrunsolicprm2 | Set the unsolicited messaging parameters (2) |
| cnc_rdunsolicprm | Get the unsolicited messaging parameters |
| cnc_rdunsolicprm2 | Get the unsolicited messaging parameters (2) |
| cnc_unsolicstart | Initiate the unsolicited messaging session |
| cnc_unsolicstop | Terminate the unsolicited messaging session |
| cnc_rdunsolicmsg | Read the unsolicited messaging data |
| cnc_rdunsolicmsg2 | Read the unsolicited messaging data (2) |
PMC: Function related to PMC
| Function Name | Brief description |
|---|---|
| pmc_rdmsg | Read message from PMC to MMC |
| pmc_wrmsg | Write message from MMC to PMC |
| pmc_crdmsg | Read message from PMC to MMC (conditional) |
| pmc_cwrmsg | Write message from MMC to PMC (conditional) |
| pmc_rdpmcrng | Read PMC data(area specified) |
| pmc_wrpmcrng | Write PMC data(area specified) |
| pmc_rdkpm | Read data from extended backup memory |
| pmc_wrkpm | Write data to extended backup memory |
| pmc_rdkpm2 | ??????????????????2 |
| pmc_wrkpm2 | ?????????????????2 |
| pmc_kpmsiz | Read maximum size of extended backup memory |
| pmc_rdpmcinfo | Read PMC data information |
| pmc_rdcntldata | Read control data of PMC data table |
| pmc_wrcntldata | Write control data of PMC data table |
| pmc_rdcntlgrp | Read the sum total group of control data |
| pmc_wrcntlgrp | Write the sum total group of control data |
| pmc_set_timer_type | Set the PMC timer tipe |
| pmc_get_timer_type | Get the PMC timer tipe |
| pmc_getdtailerr | Get detail error for PMC |
| pmc_rdalmmsg | Read PMC alarm messages |
| pmc_rdpmctitle | Read PMC title data |
| pmc_rdprmstart | Start uploading PMC parameter |
| pmc_rdpmcparam | Upload PMC parameter |
| pmc_rdprmend | End of uploading PMC parameter |
| pmc_wrprmstart | Start downloading PMC parameter |
| pmc_wrpmcparam | Download PMC parameter |
| pmc_wrprmend | End of downloading PMC parameter |
| pmc_select_pmc_unit | Select the PMC |
| pmc_get_current_pmc_unit | Get the current PMC unit type |
| pmc_get_number_of_pmc | Read the number of existing PMC paths |
| pmc_get_pmc_unit_types | Read the PMC system information |
PMC: Function Reference related to PROFIBUS-DP
| Function Name | Brief description |
|---|---|
| pmc_prfrdconfig | Read series/version of PROFIBUS software |
| pmc_prfrdbusprm | Read bus parameter of master function |
| pmc_prfwrbusprm | Write bus parameter of master function |
| pmc_prfrdslvprm | Read slave parameter of master function |
| pmc_prfwrslvprm | Write slave parameter of master function |
| pmc_prfrdallcadr | Read address allocation of master function |
| pmc_prfwrallcadr | Set address allocation of master function |
| pmc_prfrdslvaddr | Read address allocation of slave function |
| pmc_prfwrslvaddr | Set address allocation of slave function |
| pmc_prfrdslvstat | Read state of slave function |
| pmc_prfrdslvid | Reads slave index data of master function |
| pmc_prfwrslvid | Writes slave index data of master function |
| pmc_prfrdslvprm2 | Reads slave parameter of master function(2) |
| pmc_prfwrslvprm2 | Writes slave parameter of master function(2) |
| pmc_prfrddido | Reads DI/DO address data of master function |
| pmc_prfwrdido | Writes DI/DO address data of master function |
| pmc_prfrdindiadr | Reads indication address for communication mode of master function |
| pmc_prfwrindiadr | Writes indication address for communication mode of master function |
| pmc_prfrdopmode | Reads operation mode of master function |
| pmc_prfwropmode | Writes operation mode of master function |
CNC: Function related to others
| Function Name | Brief description |
|---|---|
| cnc_sysinfo | Read CNC system information |
| cnc_sysinfo_ex | Read CNC system information(2) |
| cnc_statinfo | Read CNC status information |
| cnc_statinfo2 | Read CNC status information(2) |
| cnc_alarm | Read alarm status |
| cnc_alarm2 | Read alarm status (2) |
| cnc_rdalminfo | Read alarm information |
| cnc_rdalmmsg | Read alarm message |
| cnc_rdalmmsg2 | Read alarm message (2) |
| cnc_modal | Read modal data |
| cnc_rdgcode | Read G modal code |
| cnc_rdcommand | Read commanded data |
| cnc_diagnoss | Read diagnosis data |
| cnc_diagnosr | Read diagnosis data(area specified) |
| cnc_rddiag_ext | Read random number diagnosis data |
| cnc_rddiaginfo | Read diagnosis data information |
| cnc_rddiagnum | Read minimum, maximum, total number of diagnosis data |
| cnc_adcnv | Read A/D conversion data |
| cnc_rdopmsg | Read operator's message |
| cnc_rdopmsg2 | Read operator's message (2) |
| cnc_rdopmsg3 | Read operator's message (3) |
| cnc_setpath | Set path number(for multi-path) |
| cnc_getpath | Get path number(for multi-path) |
| cnc_sysconfig | Read CNC configuration information |
| cnc_rdprstrinfo | Read program restart information |
| cnc_rstrseqsrch | Search sequence number for program restart |
| cnc_rstrseqsrch2 | Search sequence number for program restart (2) |
| cnc_rdopnlsgnl | Read output signal image of software operator's panel |
| cnc_wropnlsgnl | Write output signal of software operator's panel |
| cnc_rdopnlgnrl | Read general signal image of software operator's panel |
| cnc_wropnlgnrl | Write general signal image of software operator's panel |
| cnc_rdopnlgsname | Read general signal name of software operator's panel |
| cnc_wropnlgsname | Write general signal name of software operator's panel |
| cnc_getdtailerr | Get detail error for CNC |
| cnc_getfigure | Read maximum valid figures, number of decimal places |
| cnc_rdbrstrinfo | Read block restart information |
| cnc_rdmenuswitch | Read menu switch signal |
| cnc_wrmenuswitch | Write menu switch signal |
| cnc_rdradofs | Read internal position compensation data(cutter compensation/tool nose radius compensation) |
| cnc_rdlenofs | Read internal position compensation data(tool length compensation) |
| cnc_rdfixcycle | Read internal position compensation data(canned cycle)(canned cycle) |
| cnc_rdcdrotate | Read internal position compensation data(coordinate rotation) |
| cnc_rd3dcdcnv | Read internal position compensation data(3-D coordinate conversion) |
| cnc_rdmirimage | Read internal position compensation data(programmable mirror image) |
| cnc_rdscaling | Read internal position compensation data(scaling) |
| cnc_rd3dtofs | Read internal position compensation data(3-D tool compensation) |
| cnc_rdposofs | Read internal position compensation data(tool position compensation) |
| cnc_rdsyssoft | Read series/version of CNC system software |
| cnc_rdsyssoft2 | Read series/version of CNC system software (2) |
| cnc_rdsyssoft3 | Read series/version of CNC system software (3) |
| cnc_rdsyshard | Read of CNC hardware configuration |
| cnc_rdmdlconfig | Read module configuration of CNC system |
| cnc_rdmdlconfig2 | Read module configuration of CNC system (2) |
| cnc_gettimer | Get calendar timer of CNC |
| cnc_settimer | Set calendar timer of CNC |
| cnc_rdtimer | Get timer data of CNC |
| cnc_wrtimer | Set timer data of CNC |
| cnc_reset | CNC reset |
| cnc_reset2 | CNC reset (2) |
| cnc_clralm | Clear CNC alarm |
| cnc_getfrominfo | Read F-ROM information on CNC |
| cnc_fromgetstart | Start of reading F-ROM data from CNC |
| cnc_fromget | Read F-ROM data from CNC |
| cnc_fromgetend | End of reading F-ROM data from CNC |
| cnc_fromputstart | Start of writing F-ROM data to CNC |
| cnc_fromput | Write F-ROM data to CNC |
| cnc_fromputend | End of writing F-ROM data to CNC |
| cnc_fromremove | Delete F-ROM data on CNC |
| cnc_getsraminfo | Read S-RAM information on CNC |
| cnc_sramgetstart | Start of reading S-RAM data from CNC |
| cnc_sramget | Read S-RAM data from CNC |
| cnc_sramgetend | End of reading S-RAM data from CNC |
| cnc_getlockstat | Get state of NC data protection |
| cnc_chgprotbit | Set state of NC data protection |
| cnc_rdcexesram | Read SRAM variable area for C language executor |
| cnc_wrcexesram | Write SRAM variable area for C language executor |
| cnc_cexesramsize | Read maximum size of SRAM variable area for C language executor |
| cnc_rdetherinfo | Read Ethernet board information |
| cnc_rdcoordnum | Read additional workpiece coordinate systems number |
| cnc_rdrepeatval | Read the repeat counter |
| cnc_rdrepeatval_ext | Read the repeat counter(2) |
| cnc_rdpm_mcnitem | Read machine specific maintenance item |
| cnc_wrpm_mcnitem | Write machine specific maintenance item |
| cnc_rdpm_cncitem | Read cnc maintenance item |
| cnc_rdpm_item | Read maintenance item status |
| cnc_wrpm_item | Write maintenance item status |
| cnc_getlanguage | Get CNC display language |
