News CNCnetPDM About us Support  
       
  

CNC_WRGRPINFO3 | TOOLLIFE

TOP

Description

Write the tool group information. The following information can be modified.

  • Rest counter.

This function is not available for T/TT series. (except 30i series, 0i-D/F)

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI cnc_wrgrpinfo3(unsigned short FlibHndl,short length,IODBTGI3 *grpinfo3);

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

length   [ in ]

Specify the length of the data block (size of IODBTGI3 structure)

IODBTGI3

N is the number of the tool group to be written.

grpinfo3   [ in ]

Pointer to the IODBTGI3 structure to set the tool group information. The IODBTGI3 structure is as follows.


typedef struct iodbtgi {
    short      s_grp;          /* start group number */
    short      dummy;          /* unused */
    short      e_grp;          /* end group number */
    long       life_rest[N];   /* rest counter */
} IODBTGI3 ; /* N is the number of tool group to be written. */
s_grp
Specify the start tool group number.
e_grp
Specify the end tool group number.
life_rest[i]
Specify the rest counter.

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_LENGTH
(2)
data block length error
Size of IODBTGI3 structure(length) is wrong.
EW_NUMBER
(3)
data number error
The specification of tool group number (s_grp,e_grp) is wrong.
EW_DATA
(5)
data error
In order to get more information for this err_no return value, execute cnc_getdtailerr function. The following detail status will be set onto the member, err_no of ODBERR structure.
0:Completion status other than EW_DATA
1:Rest counter value(life_rest) error
2:Rest counter value(life_rest) error(The rest counter is larger than tool life value.)
And Tool group number including incorrect data will be set onto the member, err_dtno of ODBERR.
EW_NOOPT
(6)
no option
The tool life management B function and the extended driver/library function are necessary.(16i/18i only)
The tool life management function and the extended driver/library function is necessary.(0i-F, 30i only)
EW_PARAM
(9)
parameter error(0i-F, 30i only)
The tool life management B function and reset counter are necessary.
EW_REJECT
(13)
CNC execution rejected
Cannot write as the executing, selecting or buffering group.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

  • Series 16i/18i

    The tool life management B function.

  • Series 30i

    The tool life management function.

And this function is related to the following CNC option.

  • Series 16i/18i

    This function is influenced by 512(M Series) pairs of the tool life management.

  • Series 0i-F, 30i

    This function is influenced by additional pairs number of the tool life management.

    the tool life management :256 pairs of the tool life management on whole system with M Series
    additional pairs number of the tool life management:1024 pairs of the tool life management on whole system with M Series

For HSSB connection,

    The extended driver/library function are necessary.

For Ethernet connection,

    The Ethernet function and the extended driver/library function are necessary.

    However, in case of Series 16i/18i-B, 0i-F and 30i the required CNC option is as follows.

    When Embedded Ethernet is used,

      above two optional functions are not required.

    When Ethernet board is used,

      only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

  • Series 16i/18i
  • 6800#0,#1,#2 (influenced by setting) 6802#3 (Rest counter)
  • Series 30i
  • 6800#0,#1,#2 (influenced by setting)
    6805#4 (The tool life management B function)
    6802#3 (Rest counter)
  • Series 0i-F
  • 6800#0,#1,#2
    6805#4 (The tool life management B function)
    6802#3 (Rest counter)
    6813
    8132#0=1 (must be set)

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X X X X X X X O O X O O X O O
T (Turning) X X X X X - X X X X X X X X X X X
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X X X - X
L (Laser) - - X - - X
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/toollife/cnc_wrgrpinfo3

Fanuc Focas Library | Toollife | cnc_clrcntinfo

Clear the tool life counter and the tool information.... [read more]
Fanuc Focas Library | Toollife | cnc_clrcntinfo

Fanuc Focas Library | Toollife | cnc_deltlifedt

Deletes the tool data. When the tool data is deleted, all subsequent tool data is shifted up to fill the deleted space, as shown below.... [read more]
Fanuc Focas Library | Toollife | cnc_deltlifedt

Fanuc Focas Library | Toollife | cnc_deltlifegrp

Delete the tool group. All information on the specified group is cleared. This function is not available for Series 15 T/TT, 15i.... [read more]
Fanuc Focas Library | Toollife | cnc_deltlifegrp

Fanuc Focas Library | Toollife | cnc_instlifedt

Inserts the tool data. Tool information is set with the state of life remaining. Added data is inserted... [read more]
Fanuc Focas Library | Toollife | cnc_instlifedt

Fanuc Focas Library | Toollife | cnc_rd1length

Reads the tool length compensation number of the specified tool group and tool number. This function is effective for only M... [read more]
Fanuc Focas Library | Toollife | cnc_rd1length

Fanuc Focas Library | Toollife | cnc_rd1radius

Reads the cutter radius compensation number of the specified tool group and tool number. This function... [read more]
Fanuc Focas Library | Toollife | cnc_rd1radius

Fanuc Focas Library | Toollife | cnc_rd1tlifedat2

Reads the various tool information of the specified tool group and tool number. The following information can be acquired.... [read more]
Fanuc Focas Library | Toollife | cnc_rd1tlifedat2

Fanuc Focas Library | Toollife | cnc_rd1tlifedata

Reads the various tool information of the specified tool group and tool number. The following information are acquired.... [read more]
Fanuc Focas Library | Toollife | cnc_rd1tlifedata

Fanuc Focas Library | Toollife | cnc_rd2length

Reads the tool length compensation number of the specified tool group and tool use-order number. This... [read more]
Fanuc Focas Library | Toollife | cnc_rd2length

Fanuc Focas Library | Toollife | cnc_rd2radius

Reads the cutter radius compensation number of the specified tool group and tool use-order number. This... [read more]
Fanuc Focas Library | Toollife | cnc_rd2radius

Fanuc Focas Library | Toollife | cnc_rd2tlifedata

Reads the various tool information of the specified tool group and tool use-order number. The following information are... [read more]
Fanuc Focas Library | Toollife | cnc_rd2tlifedata

Fanuc Focas Library | Toollife | cnc_rdcount

Reads the tool life counter of the specified tool group. The unit of the tool life counter is either [minute] or [count].... [read more]
Fanuc Focas Library | Toollife | cnc_rdcount

Fanuc Focas Library | Toollife | cnc_rdexchgtgrp

The group number where the tool exchange signal has been generated is acquired in ascending order. When... [read more]
Fanuc Focas Library | Toollife | cnc_rdexchgtgrp

Fanuc Focas Library | Toollife | cnc_rdgrpid

Reads the tool group number in which the specified tool is registered. When the same tool number exists in two or more tool groups,the smallest group... [read more]
Fanuc Focas Library | Toollife | cnc_rdgrpid

Fanuc Focas Library | Toollife | cnc_rdgrpid2

Reads the tool group number in which the specified tool is registered. When the same tool number exists in two or more tool groups,... [read more]
Fanuc Focas Library | Toollife | cnc_rdgrpid2

Fanuc Focas Library | Toollife | cnc_rdgrpinfo

Reads the tool group information. The following information can be acquired. Number of tool... [read more]
Fanuc Focas Library | Toollife | cnc_rdgrpinfo

Fanuc Focas Library | Toollife | cnc_rdgrpinfo2

Reads the tool group information 2. The following information can be acquired. Optional group... [read more]
Fanuc Focas Library | Toollife | cnc_rdgrpinfo2

Fanuc Focas Library | Toollife | cnc_rdgrpinfo3

Reads the tool group information 3. The following information can be acquired. Rest counter This... [read more]
Fanuc Focas Library | Toollife | cnc_rdgrpinfo3

Fanuc Focas Library | Toollife | cnc_rdgrpinfo4

Reads the tool group information 4. The following information can be acquired. Numbers of tool... [read more]
Fanuc Focas Library | Toollife | cnc_rdgrpinfo4

Fanuc Focas Library | Toollife | cnc_rdlife

Reads the tool life value of the specified tool group. The unit of the tool life value is either [minute] or [count].... [read more]
Fanuc Focas Library | Toollife | cnc_rdlife

Fanuc Focas Library | Toollife | cnc_rdmaxgrp

Reads the maximum number of tool group.... [read more]
Fanuc Focas Library | Toollife | cnc_rdmaxgrp

Fanuc Focas Library | Toollife | cnc_rdmaxtool

Reads the maximum number of tool within group.... [read more]
Fanuc Focas Library | Toollife | cnc_rdmaxtool

Fanuc Focas Library | Toollife | cnc_rdngrp

Reads the total number of tool groups in which at least one tool is registered.... [read more]
Fanuc Focas Library | Toollife | cnc_rdngrp

Fanuc Focas Library | Toollife | cnc_rdntool

Reads the number of tools which are registered in the specified tool group.... [read more]
Fanuc Focas Library | Toollife | cnc_rdntool

Fanuc Focas Library | Toollife | cnc_rdtlgrp

Reads the tool group information. The following information can be acquired. Number of tool Number of... [read more]
Fanuc Focas Library | Toollife | cnc_rdtlgrp

Fanuc Focas Library | Toollife | cnc_rdtlinfo

Reads the maximum number of tool group, the maximum number of tool within group and the maximum number of life count.... [read more]
Fanuc Focas Library | Toollife | cnc_rdtlinfo

Fanuc Focas Library | Toollife | cnc_rdtltool

Reads the various tool information of the specified tool group. The following information are acquired. Tool number Tool length compensation... [read more]
Fanuc Focas Library | Toollife | cnc_rdtltool

Fanuc Focas Library | Toollife | cnc_rdtlusegrp

Reads the used tool group number.... [read more]
Fanuc Focas Library | Toollife | cnc_rdtlusegrp

Fanuc Focas Library | Toollife | cnc_rdtoolgrp

Reads the various tool information of the specified tool group at a time. The unit of the tool life... [read more]
Fanuc Focas Library | Toollife | cnc_rdtoolgrp

Fanuc Focas Library | Toollife | cnc_rdtoolrng

Reads the number of tool, the tool life value and the tool life counter within the specified tool group range.... [read more]
Fanuc Focas Library | Toollife | cnc_rdtoolrng

Fanuc Focas Library | Toollife | cnc_rdusegrpid

Reads the used tool group number.... [read more]
Fanuc Focas Library | Toollife | cnc_rdusegrpid

Fanuc Focas Library | Toollife | cnc_rdusetlno

Read the tool use-order numbers in the specified groups.... [read more]
Fanuc Focas Library | Toollife | cnc_rdusetlno

Fanuc Focas Library | Toollife | cnc_t1info

Reads the tool information of the specified tool group and tool number. This function cannot be used... [read more]
Fanuc Focas Library | Toollife | cnc_t1info

Fanuc Focas Library | Toollife | cnc_t2info

Reads the tool information of the specified tool group and tool use-order number.... [read more]
Fanuc Focas Library | Toollife | cnc_t2info

Fanuc Focas Library | Toollife | cnc_toolnum

Reads the tool number of the specified tool group and tool use-order number.... [read more]
Fanuc Focas Library | Toollife | cnc_toolnum

Fanuc Focas Library | Toollife | cnc_wr1tlifedat2

Writes the various tool information of the specified tool group and tool number. The following information can be modified.... [read more]
Fanuc Focas Library | Toollife | cnc_wr1tlifedat2

Fanuc Focas Library | Toollife | cnc_wr1tlifedata

Writes the various tool information of the specified tool group and tool number. The following information can be modified.... [read more]
Fanuc Focas Library | Toollife | cnc_wr1tlifedata

Fanuc Focas Library | Toollife | cnc_wr2tlifedata

Writes the various tool information of the specified tool group and tool use-order number. The following information can be... [read more]
Fanuc Focas Library | Toollife | cnc_wr2tlifedata

Fanuc Focas Library | Toollife | cnc_wrcountr

Writes the tool life counter within the specified tool group range. The unit of the tool life counter... [read more]
Fanuc Focas Library | Toollife | cnc_wrcountr

Fanuc Focas Library | Toollife | cnc_wrgrpinfo

Writes the tool group information. The following information can be modified. Tool life value. Tool life counter.... [read more]
Fanuc Focas Library | Toollife | cnc_wrgrpinfo

Fanuc Focas Library | Toollife | cnc_wrgrpinfo2

Write the tool group information. The following information can be modified. Optional... [read more]
Fanuc Focas Library | Toollife | cnc_wrgrpinfo2

Fanuc Focas Library | Toollife | flist_Toollife

CNC: Function related to tool life management data... [read more]
Fanuc Focas Library | Toollife | flist_Toollife
Modified: 2023-12-05