News CNCnetPDM About us Support  
       
  

CNC_RDMAGAZINE | TOOLMNG

TOP

Description

Reads the registered Tool management data number from the Magazine management table.

This function searches at the Magazine management table using the magazine number, pot number. And if it finds, it reads the Tool management data number from the matched entry.

Note) This function is only for "Fast Ethernet board" and "Embedded Ethernet". So, this function is not supported at "Ethernet board".

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI cnc_rdmagazine(unsigned short FlibHndl,short *data_num, IODBTLMAG *mag);

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

data_num   [ in/out ]

Specify the pointer to the number of the reading data for reading from the Magazine management table. Set the number of the reading data(1...) to the pointed data before calling this function.

After the execution of this function, *data_num holds the real read number of data.

mag   [ in/out ]

Specify the pointer to IODBTLMAG structure including the Tool management data number to be read. The IODBTLMAG structure is as follows.


typedef struct  iodbtlmag {
    short magazine;     /* magazine number */
    short pot;          /* pot number */
    sshort tool_index;  /* tool management data number */
} IODBTLMAG;
magazine
specifies magazine number.
(Setting range: 1,..,4, 11,..,14, 21,..,24)
pot
specifies pot number.
(Setting range: According to CNC option and CNC parameter)
tool_index
When this function terminates normally, tool management data number is returned.
When the pot is occupied by oversize tools, -1 is returned. (Tool management function oversize tools support option)
When the pot is a reserved origin pot of the tool storage position reservation, -2 is returned. (FS0i-F,FS30i: Tool management expansion B option)

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_BUSY
(-1)
Other users(such as PMC) have accessed the same data window. Try this function again.
EW_DATA
(5)
The member in the IODBTLMAG structure is invalid.
In order to get more information for this err_no return value, execute cnc_getdtailerr function. The following detail status will be set onto the member, err_no of OBDERR structure.
0:error except EW_DATA
21:error of magazine number
22:error of pot number
EW_NOOPT
(6)
No option
The Tool management function 64 pairs, or the Tool management function 240 pairs, or the Tool management function 1000 pairs.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

    The Tool management function 64 pairs, or the Tool management function 240 pairs, or the Tool management function 1000 pairs.

For HSSB connection,

    The extended driver/library function are necessary.

For Ethernet connection,

    The Ethernet function and the extended driver/library function are necessary.

    However, in case of Series 16i/18i/21i-B, 0i-F and 30i, the required CNC option is as follows.

    When Embedded Ethernet is used,

      above two optional functions are not required.

    When Ethernet board is used,

      only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

    13220 (valid number of Tool management data)
    13222 (number of data for the 1st magazine)
    13223 (starting pot number for the 1st magazine)
    13227 (number of data for the 2nd magazine)
    13228 (starting pot number for the 2nd magazine)
    13232 (number of data for the 3rd magazine)
    13233 (starting pot number for the 3rd magazine)
    13237 (number of data for the 4th magazine)
    13238 (starting pot number for the 4th magazine)

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X O X X X X X O O O O O O O O
T (Turning) X X X O X - X X X X X X O O O O O
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X X X - X
L (Laser) - - X - - X
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

cnc_regmagazine   cnc_delmagazine   cnc_wrmagazine  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/toolmng/cnc_rdmagazine

Fanuc Focas Library | ToolMng | cnc_btlfpotsrh

Searches the empty pot in the same magazine based on the specified pot position.... [read more]
Fanuc Focas Library | ToolMng | cnc_btlfpotsrh

Fanuc Focas Library | ToolMng | cnc_delmagazine

Deletes the registered Tool management data number from the Magazine management table. This function searches at the Magazine... [read more]
Fanuc Focas Library | ToolMng | cnc_delmagazine

Fanuc Focas Library | ToolMng | cnc_delmag_property

Deletes the magazine property data.... [read more]
Fanuc Focas Library | ToolMng | cnc_delmag_property

Fanuc Focas Library | ToolMng | cnc_delpot_property

This function deletes the pot property data within the range specified by s_number and data_num.... [read more]
Fanuc Focas Library | ToolMng | cnc_delpot_property

Fanuc Focas Library | ToolMng | cnc_deltool

Deletes the Tool management data which is specified by the start data number and the number of the data from the Tool management... [read more]
Fanuc Focas Library | ToolMng | cnc_deltool

Fanuc Focas Library | ToolMng | cnc_rdmag_property

Reads the magazine property data.... [read more]
Fanuc Focas Library | ToolMng | cnc_rdmag_property

Fanuc Focas Library | ToolMng | cnc_rdpot_property

This function reads the pot property data within the range specified by s_number and data_num.... [read more]
Fanuc Focas Library | ToolMng | cnc_rdpot_property

Fanuc Focas Library | ToolMng | cnc_rdtool

Reads the Tool management data which is specified by the start data number and the number of the data from the Tool management... [read more]
Fanuc Focas Library | ToolMng | cnc_rdtool

Fanuc Focas Library | ToolMng | cnc_rdtoolgeom_tlm

The tool geometry data of number specified by datanum is read from the tool geometry data number specified by snum.... [read more]
Fanuc Focas Library | ToolMng | cnc_rdtoolgeom_tlm

Fanuc Focas Library | ToolMng | cnc_rdtool_f2

Reads the Tool management data which is specified by the start data number and the number of the data from the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_rdtool_f2

Fanuc Focas Library | ToolMng | cnc_regmagazine

Registers the Tool management data number to the Magazine management table. This function searches at the Magazine management table... [read more]
Fanuc Focas Library | ToolMng | cnc_regmagazine

Fanuc Focas Library | ToolMng | cnc_regtool

Registers the Tool management data which is specified by the start data number and the number of the data to the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_regtool

Fanuc Focas Library | ToolMng | cnc_regtool_f2

Registers the Tool management data which is specified by the start data number and the number of the data to the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_regtool_f2

Fanuc Focas Library | ToolMng | cnc_reg_toolstrage

Storage position of magazine number and pot number is registered or released to tool management data. By specifying the storage position of... [read more]
Fanuc Focas Library | ToolMng | cnc_reg_toolstrage

Fanuc Focas Library | ToolMng | cnc_tool_move

The tool management data number is moved specifying the magazine number and the pot number of the source and the destination. When Tool Management... [read more]
Fanuc Focas Library | ToolMng | cnc_tool_move

Fanuc Focas Library | ToolMng | cnc_wrmagazine

Writes the Tool management data number to the entry of the Magazine management table specified by magazine number and pot... [read more]
Fanuc Focas Library | ToolMng | cnc_wrmagazine

Fanuc Focas Library | ToolMng | cnc_wrmag_property

Writes the magazine property data.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrmag_property

Fanuc Focas Library | ToolMng | cnc_wrpot_property

This function writes the pot property data within the range specified by s_number and data_num.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrpot_property

Fanuc Focas Library | ToolMng | cnc_wrtool

Writes the specified Tool management data to the Tool management data table. In case of writing the individual data on the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtool

Fanuc Focas Library | ToolMng | cnc_wrtool2

Writes the individual data on the Tool management data to the specified Tool management data table.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtool2

Fanuc Focas Library | ToolMng | cnc_wrtoolgeom_tlm

The tool geometry data of number specified by datanum is written from the tool geometry data number specified by snum.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtoolgeom_tlm

Fanuc Focas Library | ToolMng | cnc_wrtool_f2

Writes the specified Tool management data to the Tool management data table. In case of writing the individual data on the... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtool_f2

Fanuc Focas Library | ToolMng | flist_ToolMng

CNC: Function related to tool management data... [read more]
Fanuc Focas Library | ToolMng | flist_ToolMng
Modified: 2023-12-05