|
| |
ETH_RDLOG | DATA
 |
Fanuc Focas Library | Data | cnc_clrmsgbuff Clears the receive buffer or the transmit buffer.... [read more] |  |
Fanuc Focas Library | Data | cnc_dschdir DATA SERVER Changing a current folder of the ATA card with DATA SERVER function. DATA SERVER Host... [read more] | |
Fanuc Focas Library | Data | cnc_dscopyfile Copying a file in the ATA card with DATA SERVER function.... [read more] | |
Fanuc Focas Library | Data | cnc_dsftpcancel This function is used to cancel the following operetions.... [read more] | |
Fanuc Focas Library | Data | cnc_dsftpstat The execution result(EW_OK/EW_DTSRVR) of the following function can be taken out only at once.... [read more] | |
Fanuc Focas Library | Data | cnc_dsget_req Directs to GET a file to from a host computer at DATA SERVER. When this function is normally ended, it starts getting files from host... [read more] | |
Fanuc Focas Library | Data | cnc_dslistdel_req According to the list which exists in the ATA card of DATA SERVER functon, two or more files are deleted. When this function carries... [read more] | |
Fanuc Focas Library | Data | cnc_dslistget_req According to the list file which exists in the connection host of DATA SERVER function, the file transfer of two or more files is continuously carried... [read more] | |
Fanuc Focas Library | Data | cnc_dslistput_req According to the list file which exists in the ATA card of DATA SERVER function ,the file transfer of two or more files is carried out to a connection... [read more] | |
Fanuc Focas Library | Data | cnc_dsmget_req It directs to MGET a file from a host computer to DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more] | |
Fanuc Focas Library | Data | cnc_dsmkdir DATA SERVER A new folder is created to the current folder of the ATA card of DATA SERVER function. DATA SERVER... [read more] | |
Fanuc Focas Library | Data | cnc_dsmput_req It directs to MPUT a file to a host computer from DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more] | |
Fanuc Focas Library | Data | cnc_dsput_req Directs to PUT a file to a host computer to DATA SERVER. When this function is normally ended, it starts putting files from host... [read more] | |
Fanuc Focas Library | Data | cnc_dsremove DATA SERVER The file in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER Host... [read more] | |
Fanuc Focas Library | Data | cnc_dsrename DATA SERVER Changing the file or folder name which exist in the current folder of the ATA card of DATA SERVER... [read more] | |
Fanuc Focas Library | Data | cnc_dsrmdir DATA SERVER The folder in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvchkdsk Checks the hard disk on the DATA SERVER whether there is an error sector etc. or not. If this function is executed while... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvcnclupdn Cancels the following if it is being executed. - Download from DATA SERVER to CNC - Upload from CNC to... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvdelete Deletes the file in the DATA SERVER. If this function is executed while... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvdownload Orders the CNC to download the file from the DATA SERVER. Therefore, normal termination of this function shows that downloading the file from the DATA SERVER... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvftpget Orders the DATA SERVER to get file from the host computer. Therefore, normal termination of this function shows that getting the file from the host computer... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvftpput Orders the DATA SERVER to put file to the host computer. Therefore, normal termination of this function shows that putting the file to the host computer has... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvftpstat The execution result of cnc_dtsvftpput ,... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvgetdncpg Gets the file name for DNC operation in the DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvgetmode Gets the current mode of the DATA SERVER(storage mode/buffer mode).... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvhdformat Formats the hard disk on the DATA SERVER. If this function is executed while... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvmntinfo Reads the following maintenance information for the DATA SERVER. This is the function for purposes of maintenance.... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvrdcram Reads the contents of the interface buffer for the DATA SERVER. This is the function for purposes of maintenance.... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvrderrmsg Reads the message of the error occurred in the DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvrdfile Transfers file from DATA SERVER to hard disk on personal computer. This function is effective for the DATA SERVER board(10BASE-T), and... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvrdpgdir Reads the directory information in the DATA SERVER. If this function is executed while... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvrdset Reads the setting data in the DATA SERVER. If this function is executed while... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvsavecram Saves the contents of the interface buffer for the DATA SERVER to the file by the name of COMMON.RAM in the hard disk of the DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvsetdncpg Sets the file name for DNC operation in the DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvsetmode Sets the current mode of the DATA SERVER(storage mode/buffer mode). If the mode of the DATA SERVER is changed, all the data in hard disk of the DATA... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvupdnstat The execution result of cnc_dtsvdownload ,... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvupload Orders the CNC to upload the file to the DATA SERVER. Therefore, normal termination of this function shows that uploading the file to the DATA SERVER has been... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvwrfile Transfers file from hard disk on personal computer to DATA SERVER. This function is effective for the DATA SERVER board(10BASE-T), and 16i/18i/21i, 0i.... [read more] | |
Fanuc Focas Library | Data | cnc_dtsvwrset Writes the setting data in the DATA SERVER. If this function is executed while... [read more] | |
Fanuc Focas Library | Data | cnc_rdcomlogmsg Reads logging message for DNC2.... [read more] | |
Fanuc Focas Library | Data | cnc_rdcomopemsg Reads operator's message for DNC1,DNC2.... [read more] | |
Fanuc Focas Library | Data | cnc_rdcomparam Reads communication parameters for DNC1, DNC2 or OSI-Ethernet function.... [read more] | |
Fanuc Focas Library | Data | cnc_rddncfname Reads the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more] | |
Fanuc Focas Library | Data | cnc_rddsdevinfo All the number of pages , the use number of pages, the total number of entries, and the numberof use entries are taken out from an ATA... [read more] | |
Fanuc Focas Library | Data | cnc_rddsdir DATA SERVER The current folder name of the ATA card of DATA SERVER function is taken out with a full path.... [read more] | |
Fanuc Focas Library | Data | cnc_rddsdncfile DATA SERVER The file name set to DNC operation at the time of the Storage mode of DATA SERVER function is taken out with... [read more] | |
Fanuc Focas Library | Data | cnc_rddsfile DATA SERVER The list of the files in the current folder of DATA SERVER function (a sub folder is included) is taken out.... [read more] | |
Fanuc Focas Library | Data | cnc_rdrcvmsg Reads contents of the receive buffer in which received message is stored. When this function is called, receipt status in CNC is... [read more] | |
Fanuc Focas Library | Data | cnc_rdrcvstat Obtains receipt status of message for OSI-Ethernet. The receipt status becomes ON when CNC receives a message for OSI-Ethernet, and becomes OFF when... [read more] | |
Fanuc Focas Library | Data | cnc_rdsndmsg Reads contents of the transmit buffer in which transmitted message is stored.... [read more] | |
Fanuc Focas Library | Data | cnc_sendmessage Sends message to the host computer.... [read more] | |
Fanuc Focas Library | Data | cnc_wrcomparam Writes communication parameters for DNC1,DNC2 or OSI-Ethernet function. When communication parameters are written to OSI-Ethernet board... [read more] | |
Fanuc Focas Library | Data | cnc_wrdncfname Writes the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more] | |
Fanuc Focas Library | Data | cnc_wrdsdncfile DATA SERVER The file for DNC operation at the time of the storage mode of DATA SERVER function is set up. DATA... [read more] | |
Fanuc Focas Library | Data | ds_cancel The execution of the function for the following DATA SERVER is stopped.... [read more] | |
Fanuc Focas Library | Data | ds_checkhdd Whether a defective sector exists in the hard disk is checked.... [read more] | |
Fanuc Focas Library | Data | ds_chghdddir Change the work directory(current directory) of hard disk in the DATA SERVER. This function is available even to Fast Ethernet.... [read more] | |
Fanuc Focas Library | Data | ds_copyhddfile The file in the hard disk of the DATA SERVER is copied. In this function, the control returns to the application without only requesting the copy of the file... [read more] | |
Fanuc Focas Library | Data | ds_delhdddir Delete the directory in the hard disk of the DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | ds_delhddfile The file in the hard drive of the DATA SERVER is deleted. The some files can be deleted simultaneously by specifying wild-card(*,?). In this function,... [read more] | |
Fanuc Focas Library | Data | ds_delhostfile Delete the file of host computer. The wild-card(*, ?) cannot be used to specify the name.... [read more] | |
Fanuc Focas Library | Data | ds_download Outputs data to be registered(downloading). This function is only for Fast Ethernet board. This function is not supported at Embedded... [read more] | |
Fanuc Focas Library | Data | ds_dwnend Notifies the end of downloading data to CNC. (This function must be executed after... [read more] | |
Fanuc Focas Library | Data | ds_dwnstart Requests CNC to start downloading. (This function must be executed before... [read more] | |
Fanuc Focas Library | Data | ds_formathdd The hard disk is formatted(initialization).... [read more] | |
Fanuc Focas Library | Data | ds_gethostfile The file of the host computer is transferred to the hard disk of the DATA SERVER according to the get command of the FTP.... [read more] | |
Fanuc Focas Library | Data | ds_ldelhddfile The files in the hard disk of the DATA SERVER are deleted according to the list file. The wild-card(*, ?)... [read more] | |
Fanuc Focas Library | Data | ds_lgethostfile The files in the host computer are transferred to the hard disk of the DATA SERVER by the processing of FTP according to the... [read more] | |
Fanuc Focas Library | Data | ds_lputhddfile The files in the hard disk of the DATA SERVER are transferred to the host computer by the processing of FTP according to the... [read more] | |
Fanuc Focas Library | Data | ds_makehdddir Make the directory in the hard disk of the DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | ds_mgethostfile The files of the host computer are transferred to the hard disk of the DATA SERVER according to the mget command of the... [read more] | |
Fanuc Focas Library | Data | ds_mputhddfile The files in the hard disk of the DATA SERVER are transferred to the host computer according to the mput command of the... [read more] | |
Fanuc Focas Library | Data | ds_puthddfile The file in the hard disk of the DATA SERVER is transferred to the host computer side according to the put command of the FTP. The wild-card(*, ?) cannot... [read more] | |
Fanuc Focas Library | Data | ds_rddnchddfile The file name which includes the PATH name in the hard disk which is setted for the DNC operation are acquired.... [read more] | |
Fanuc Focas Library | Data | ds_rddnchostfile The connected host number and the file name in host computer for the DNC operation is acquired.... [read more] | |
Fanuc Focas Library | Data | ds_rdfile Transfers file from DATA SERVER to hard disk on personal computer. This function is effective in only 16i/18i/21i. and, this function... [read more] | |
Fanuc Focas Library | Data | ds_rdhdddir Get the file information at each file. The following information is acquired at each file. - File name... [read more] | |
Fanuc Focas Library | Data | ds_rdhddinfo Get the information of hard disk of DATA SERVER. The following information can be acquired. - The remainder capacity of hard disk.... [read more] | |
Fanuc Focas Library | Data | ds_rdhostdir Get the file information of host computer.... [read more] | |
Fanuc Focas Library | Data | ds_rdhostdir2 Get the number of files and file information of login directory on the host computer. Information acquired in... [read more] | |
Fanuc Focas Library | Data | ds_rdhostinfo Get the information of login directory of the host computer. The following information is acquired.... [read more] | |
Fanuc Focas Library | Data | ds_rdhostno Get the host number of the connected host computer.... [read more] | |
Fanuc Focas Library | Data | ds_rdm198hdddir The work directory for the M198(subprogram call) is acquired.... [read more] | |
Fanuc Focas Library | Data | ds_rdm198host Connected host number for the M198(subprogram call) is acquired.... [read more] | |
Fanuc Focas Library | Data | ds_rdmntinfo The data for troubleshooting is acquired as maintenance information for the file transfer between the DATA SERVER and CNC.... [read more] | |
Fanuc Focas Library | Data | ds_rdmode Get the mode for the DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | ds_rdncfile The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more] | |
Fanuc Focas Library | Data | ds_rdncfile2 The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more] | |
Fanuc Focas Library | Data | ds_rdresult Get the execution result of the function for the following DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | ds_renhddfile The file name in the hard disk of the DATA SERVER is changed.... [read more] | |
Fanuc Focas Library | Data | ds_searchresult Gets the result of ds_searchword function.... [read more] | |
Fanuc Focas Library | Data | ds_searchword The string of the NC program in DATA SERVER at the running of M198/DNC in MEM/RMT mode is searched. The result of search can... [read more] | |
Fanuc Focas Library | Data | ds_wrdnchddfile The file name in the hard disk of the DATA SERVER for DNC operation is set. The current work directory is... [read more] | |
Fanuc Focas Library | Data | ds_wrdnchostfile The file name of the host computer for DNC operation is set. The current connected host computer is set... [read more] | |
Fanuc Focas Library | Data | ds_wrfile Transfers file from hard disk on personal computer to DATA SERVER. This function is effective in only 16i/18i/21i. and, this function... [read more] | |
Fanuc Focas Library | Data | ds_wrhostno The host computer which works the FTP server which becomes the other party of the communication of the DATA SERVER is changed.... [read more] | |
Fanuc Focas Library | Data | ds_wrm198hdddir The work directory for the M198(subprogram call) is set. The current directory in the hard disk of the... [read more] | |
Fanuc Focas Library | Data | ds_wrm198host Connected host number for the M198(subprogram call) is set. The connected host of now becomes the host for... [read more] | |
Fanuc Focas Library | Data | ds_wrmode Set the mode for the DATA SERVER. The mode of the DATA SERVER which can be set is shown as follows.... [read more] | |
Fanuc Focas Library | Data | ds_wrncfile The NC program is outputted from the NC to the hard drive. Storage mode : To hard disk(or ATA) of DATA SERVER from CNC... [read more] | |
Fanuc Focas Library | Data | etb_rderrmsg Get the error message which occurred in the Ethernet board. This function acquires the error message of the Ethernet board... [read more] | |
Fanuc Focas Library | Data | etb_rdparam Get the parameter of ethernet board. The following parameter can be acquired by this function.... [read more] | |
Fanuc Focas Library | Data | etb_wrparam Set the parameter for Ethernet board. The following parameter can be set to the Ethernet board. Parameter... [read more] | |
Fanuc Focas Library | Data | eth_clrlog Clear the logs for Ethernet function : Embedded Ethernet[Internal port ,PCMCIA Card], Fast Ethernet board, Fast DATA SERVER board, Windows CE... [read more] | |
Fanuc Focas Library | Data | eth_dschkdsk Check disk of ATA card on DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | eth_dsformat Format ATA card on DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | eth_rddsformat Get the format of ATA card on DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | eth_rddsm198dir Get the work folder for the M198 on DATA SERVER using Strage mode.... [read more] | |
Fanuc Focas Library | Data | eth_rddsm198host Get the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more] | |
Fanuc Focas Library | Data | eth_rddsmode Get the all channel modes on DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | eth_rddsstate Get each path of maintenance information on DATA SERVER.... [read more] | |
Fanuc Focas Library | Data | eth_rdhost Get the host number selected current Ethernet function.... [read more] | |
Fanuc Focas Library | Data | eth_rdparam Get the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more] | |
Fanuc Focas Library | Data | eth_wrdsm198dir Set the work folder for the M198 on DATA SERVER using Strage mode.... [read more] | |
Fanuc Focas Library | Data | eth_wrdsm198host Set the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more] | |
Fanuc Focas Library | Data | eth_wrdsmode Change the mode for DATA SERVER function.... [read more] | |
Fanuc Focas Library | Data | eth_wrhost Set the host number selected Ethernet function.... [read more] | |
Fanuc Focas Library | Data | eth_wrparam Sets the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more] | |
Fanuc Focas Library | Data | flist_Data CNC: Function Reference related to data server,DNC1,DNC2,OSI-Ethernet... [read more] | |
| Modified: 2026-03-24 |
| |
