News CNCnetPDM About us Support  
         
  

DS_DWNSTART | DATA

Description

Requests CNC to start downloading.
(This function must be executed before ds_download)
This function is only for "Fast Ethernet board". This function is not supported at "Embedded Ethernet" and "Ethernet board".
MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h"

FWLIBAPI short WINAPI ds_dwnstart(unsigned short FlibHndl, char *dtsv_file, short user);

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

dtsv_file   [ in ]
Specify the pointer to the file name in the DATA SERVER.
The specification of the file name of the DATA SERVER is as follows:
  • Use ASCII code.
  • The last character of the file name must be 'NULL'.
  • It is impossible to specify the path.
  • (The file is made in the directory "\NCDATA" of the DATA SERVER)
  • The wild-card('*','?') can be used.
  • Specify the MS-DOS form.
  • (file name 8 char.+'.'+extension 3 char.+'NULL', total is within 13 char.)

    <ex.> "XXXXXXXX.XXX" + NULL

    However, the "O" number is managed as a file name now.

    <ex.> "O0001" + NULL

user   [ in ]
Specify the Task channel of the DATA SERVER.(11-17)
DATA SERVER has 8 Task channels.
The channel that a parsonal computer uses for transferring a file is specified by this "user".
Available number is from 11 to 17.

DATA SERVER can give 8 services for each user(NC, Personal computer, PMC, C-EXE).
In order to decide which channel each user uses, it is necessary that NC parameters(No.941-948) are set with user's number as follows.

  • User's number
  • 0:Invalid
    1:1'st path of CNC
    2:2'nd path of CNC
    3:3'rd path of CNC
    4:4'th path of CNC
    5:5'th path of CNC
    6:6'th path of CNC
    7:7'th path of CNC
    8:8'th path of CNC

    11:Personal computer function No.1
    12:Personal computer function No.2
    13:Personal computer function No.3
    14:Personal computer function No.4
    15:Personal computer function No.5
    16:Personal computer function No.6
    17:Personal computer function No.7

    21:PMC
    31:C-EXE

  • CNC parameters
  • NO.941:For channel No.1
    NO.942:For channel No.2
    NO.943:For channel No.3
    NO.944:For channel No.4
    NO.945:For channel No.5
    NO.946:For channel No.6
    NO.947:For channel No.7
    NO.948:For channel No.8

    NC patameters(No.941-948) must be set before using this function(If these parameters are all invalid, CNC No.1 uses channel No.1).

    When you set this parameter for Personal computer function user(11-17), it is necessary to specify the channel of each path which CNC uses.
    When the user number is not set, the operation between CNC and the DATA SERVER cannot be done.
  • Example
  • 1'st channel(No.941):1 (1st path for CNC))
    2'nd channel(No.942):2 (2nd path for CNC)
    3'rd channel(No.943):11(Personal computer function No.1)
    4'th channel(No.944):12(Personal computer function No.2)

    Return

    EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

    The major error codes are as follows.

    Return code Meaning/Error handling
    EW_BUSY
    (-1)
    ds_dwnstart function has been executed.
    Terminate a downloading by using ds_dwnend function.
    EW_PARAM
    (9)
    Task channel setting error in NC parameter
    - Setting user's number 11-17 for personal computer function to NC parameters(No.941-948) is necessary.
    EW_NUMBER
    (3)
    Task channel setting error in this function
    - Setting user's number 11-17 for personal computer function to argument"chnl" is necessary.
    EW_NOOPT
    (6)
    No option
    - The extended driver/library function is necessary.
    - The DATA SERVER board(10BASE-T) is necessary.
    - Hard disk is necessary on the DATA SERVER board.
    EW_REJECT
    (13)
    CNC execution rejection
    The DATA SERVER is doing another processing.
    EW_DTSRVR
    (14)
    DATA SERVER error
    In order to get more information for this err_no return value, execute cnc_getdtailerr function.
    The following details status will be set onto the member, err_no of ODBERR structure.As for the details, see "Ethernet Board/DATA SERVER Board OPERATOR'S MANUAL".
    0xf000, 0xfe00-:Error code from DATA SERVER
    1 :Time out in DATA SERVER's operation

    As for the other return codes or the details, see "Return status of Data window function"

    CNC option

    For Ethernet connection,

      The ethernet function and the DATA SERVER function are necessary.

    CNC parameter

    This function is not related to CNC parameter.

    CNC mode

    This function can be used in any CNC mode.

    Available CNC

    0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
    M (Machining)X X X X X X X X X E E E E E E X X
    T (Turning) X X X X X - X X X E E E E E E X X
    LC (Loader) - - - - - - X X X X X X X X X - -

    0i-D0i-F16i18i30i-A30i-B
    P (Punch press)X X X X - X
    L (Laser) - - X - - X
    W (Wire) - - X X X X


    Power Mate i-DX
    Power Mate i-HX
    Power Motion i-AX

    "O" : Both Ethernet and HSSB
    "E" : Ethernet
    "H" : HSSB
    "X" : Cannot be used
    "-" : None

    Note) 0i-C does not support the HSSB function.

    See Also

    ds_download   ds_dwnend  

    Privacy notice

    This website uses cookies. By continuing to use it you agree to our privacy policy. 

    https://www.inventcom.net/fanuc-focas-library/data/ds_dwnstart
    Fanuc Focas Library | Data | cnc_clrmsgbuff
    Description Clears the receive buffer or the transmit buffer.... [read more]
    cnc_clrmsgbuff
    Fanuc Focas Library | Data | cnc_dschdir
    Description DATA SERVER Changing a current folder of the ATA card with DATA SERVER function. DATA SERVER Host... [read more]
    cnc_dschdir
    Fanuc Focas Library | Data | cnc_dscopyfile
    Description Copying a file in the ATA card with DATA SERVER function.... [read more]
    cnc_dscopyfile
    Fanuc Focas Library | Data | cnc_dsftpcancel
    Description This function is used to cancel the following operetions.... [read more]
    cnc_dsftpcancel
    Fanuc Focas Library | Data | cnc_dsftpstat
    Description The execution result(EW_OK/EW_DTSRVR) of the following function can be taken out only at once.... [read more]
    cnc_dsftpstat
    Fanuc Focas Library | Data | cnc_dsget_req
    Description Directs to GET a file to from a host computer at DATA SERVER. When this function is normally ended, it starts getting files from host... [read more]
    cnc_dsget_req
    Fanuc Focas Library | Data | cnc_dslistdel_req
    Description According to the list which exists in the ATA card of DATA SERVER functon, two or more files are deleted. When this function carries... [read more]
    cnc_dslistdel_req
    Fanuc Focas Library | Data | cnc_dslistget_req
    Description According to the list file which exists in the connection host of DATA SERVER function, the file transfer of two or more files is continuously carried... [read more]
    cnc_dslistget_req
    Fanuc Focas Library | Data | cnc_dslistput_req
    Description According to the list file which exists in the ATA card of DATA SERVER function ,the file transfer of two or more files is carried out to a connection... [read more]
    cnc_dslistput_req
    Fanuc Focas Library | Data | cnc_dsmget_req
    Description It directs to MGET a file from a host computer to DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]
    cnc_dsmget_req
    Fanuc Focas Library | Data | cnc_dsmkdir
    Description DATA SERVER A new folder is created to the current folder of the ATA card of DATA SERVER function. DATA SERVER... [read more]
    cnc_dsmkdir
    Fanuc Focas Library | Data | cnc_dsmput_req
    Description It directs to MPUT a file to a host computer from DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]
    cnc_dsmput_req
    Fanuc Focas Library | Data | cnc_dsput_req
    Description Directs to PUT a file to a host computer to DATA SERVER. When this function is normally ended, it starts putting files from host... [read more]
    cnc_dsput_req
    Fanuc Focas Library | Data | cnc_dsremove
    Description DATA SERVER The file in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER Host... [read more]
    cnc_dsremove
    Fanuc Focas Library | Data | cnc_dsrename
    Description DATA SERVER Changing the file or folder name which exist in the current folder of the ATA card of DATA SERVER... [read more]
    cnc_dsrename
    Fanuc Focas Library | Data | cnc_dsrmdir
    Description DATA SERVER The folder in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER... [read more]
    cnc_dsrmdir
    Fanuc Focas Library | Data | cnc_dtsvchkdsk
    Description Checks the hard disk on the DATA SERVER whether there is an error sector etc. or not. If this function is executed while... [read more]
    cnc_dtsvchkdsk
    Fanuc Focas Library | Data | cnc_dtsvcnclupdn
    Description Cancels the following if it is being executed. - Download from DATA SERVER to CNC - Upload from CNC to... [read more]
    cnc_dtsvcnclupdn
    Fanuc Focas Library | Data | cnc_dtsvdelete
    Description Deletes the file in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvdelete
    Fanuc Focas Library | Data | cnc_dtsvdownload
    Description Orders the CNC to download the file from the DATA SERVER. Therefore, normal termination of this function shows that downloading the file from the DATA SERVER... [read more]
    cnc_dtsvdownload
    Fanuc Focas Library | Data | cnc_dtsvftpget
    Description Orders the DATA SERVER to get file from the host computer. Therefore, normal termination of this function shows that getting the file from the host computer... [read more]
    cnc_dtsvftpget
    Fanuc Focas Library | Data | cnc_dtsvftpput
    Description Orders the DATA SERVER to put file to the host computer. Therefore, normal termination of this function shows that putting the file to the host computer has... [read more]
    cnc_dtsvftpput
    Fanuc Focas Library | Data | cnc_dtsvftpstat
    Description The execution result of cnc_dtsvftpput ,... [read more]
    cnc_dtsvftpstat
    Fanuc Focas Library | Data | cnc_dtsvgetdncpg
    Description Gets the file name for DNC operation in the DATA SERVER.... [read more]
    cnc_dtsvgetdncpg
    Fanuc Focas Library | Data | cnc_dtsvgetmode
    Description Gets the current mode of the DATA SERVER(storage mode/buffer mode).... [read more]
    cnc_dtsvgetmode
    Fanuc Focas Library | Data | cnc_dtsvhdformat
    Description Formats the hard disk on the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvhdformat
    Fanuc Focas Library | Data | cnc_dtsvmntinfo
    Description Reads the following maintenance information for the DATA SERVER. This is the function for purposes of maintenance.... [read more]
    cnc_dtsvmntinfo
    Fanuc Focas Library | Data | cnc_dtsvrdcram
    Description Reads the contents of the interface buffer for the DATA SERVER. This is the function for purposes of maintenance.... [read more]
    cnc_dtsvrdcram
    Fanuc Focas Library | Data | cnc_dtsvrderrmsg
    Description Reads the message of the error occurred in the DATA SERVER.... [read more]
    cnc_dtsvrderrmsg
    Fanuc Focas Library | Data | cnc_dtsvrdfile
    Description Transfers file from DATA SERVER to hard disk on personal computer. This function is effective for the DATA SERVER board(10BASE-T), and... [read more]
    cnc_dtsvrdfile
    Fanuc Focas Library | Data | cnc_dtsvrdpgdir
    Description Reads the directory information in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvrdpgdir
    Fanuc Focas Library | Data | cnc_dtsvrdset
    Description Reads the setting data in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvrdset
    Fanuc Focas Library | Data | cnc_dtsvsavecram
    Description Saves the contents of the interface buffer for the DATA SERVER to the file by the name of "COMMON.RAM" in the hard disk of the DATA SERVER.... [read more]
    cnc_dtsvsavecram
    Fanuc Focas Library | Data | cnc_dtsvsetdncpg
    Description Sets the file name for DNC operation in the DATA SERVER.... [read more]
    cnc_dtsvsetdncpg
    Fanuc Focas Library | Data | cnc_dtsvsetmode
    Description Sets the current mode of the DATA SERVER(storage mode/buffer mode). If the mode of the DATA SERVER is changed, all the data in hard disk of the DATA... [read more]
    cnc_dtsvsetmode
    Fanuc Focas Library | Data | cnc_dtsvupdnstat
    Description The execution result of cnc_dtsvdownload ,... [read more]
    cnc_dtsvupdnstat
    Fanuc Focas Library | Data | cnc_dtsvupload
    Description Orders the CNC to upload the file to the DATA SERVER. Therefore, normal termination of this function shows that uploading the file to the DATA SERVER has been... [read more]
    cnc_dtsvupload
    Fanuc Focas Library | Data | cnc_dtsvwrfile
    Description Transfers file from hard disk on personal computer to DATA SERVER. This function is effective for the DATA SERVER board(10BASE-T), and 16i/18i/21i, 0i.... [read more]
    cnc_dtsvwrfile
    Fanuc Focas Library | Data | cnc_dtsvwrset
    Description Writes the setting data in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvwrset
    Fanuc Focas Library | Data | cnc_rdcomlogmsg
    Description Reads logging message for DNC2.... [read more]
    cnc_rdcomlogmsg
    Fanuc Focas Library | Data | cnc_rdcomopemsg
    Description Reads operator's message for DNC1,DNC2.... [read more]
    cnc_rdcomopemsg
    Fanuc Focas Library | Data | cnc_rdcomparam
    Description Reads communication parameters for DNC1, DNC2 or OSI-Ethernet function.... [read more]
    cnc_rdcomparam
    Fanuc Focas Library | Data | cnc_rddncfname
    Description Reads the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]
    cnc_rddncfname
    Fanuc Focas Library | Data | cnc_rddsdevinfo
    Description All the number of pages , the use number of pages, the total number of entries, and the numberof use entries are taken out from an ATA... [read more]
    cnc_rddsdevinfo
    Fanuc Focas Library | Data | cnc_rddsdir
    Description DATA SERVER The current folder name of the ATA card of DATA SERVER function is taken out with a full path.... [read more]
    cnc_rddsdir
    Fanuc Focas Library | Data | cnc_rddsdncfile
    Description DATA SERVER The file name set to DNC operation at the time of the Storage mode of DATA SERVER function is taken out with... [read more]
    cnc_rddsdncfile
    Fanuc Focas Library | Data | cnc_rddsfile
    Description DATA SERVER The list of the files in the current folder of DATA SERVER function (a sub folder is included) is taken out.... [read more]
    cnc_rddsfile
    Fanuc Focas Library | Data | cnc_rdrcvmsg
    Description Reads contents of the receive buffer in which received message is stored. When this function is called, receipt status in CNC is... [read more]
    cnc_rdrcvmsg
    Fanuc Focas Library | Data | cnc_rdrcvstat
    Description Obtains receipt status of message for OSI-Ethernet. The receipt status becomes ON when CNC receives a message for OSI-Ethernet, and becomes OFF when... [read more]
    cnc_rdrcvstat
    Fanuc Focas Library | Data | cnc_rdsndmsg
    Description Reads contents of the transmit buffer in which transmitted message is stored.... [read more]
    cnc_rdsndmsg
    Fanuc Focas Library | Data | cnc_sendmessage
    Description Sends message to the host computer.... [read more]
    cnc_sendmessage
    Fanuc Focas Library | Data | cnc_wrcomparam
    Description Writes communication parameters for DNC1,DNC2 or OSI-Ethernet function. When communication parameters are written to OSI-Ethernet board... [read more]
    cnc_wrcomparam
    Fanuc Focas Library | Data | cnc_wrdncfname
    Description Writes the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]
    cnc_wrdncfname
    Fanuc Focas Library | Data | cnc_wrdsdncfile
    Description DATA SERVER The file for DNC operation at the time of the storage mode of DATA SERVER function is set up. DATA... [read more]
    cnc_wrdsdncfile
    Fanuc Focas Library | Data | ds_cancel
    Description The execution of the function for the following DATA SERVER is stopped.... [read more]
    ds_cancel
    Fanuc Focas Library | Data | ds_checkhdd
    Description Whether a defective sector exists in the hard disk is checked.... [read more]
    ds_checkhdd
    Fanuc Focas Library | Data | ds_chghdddir
    Description Change the work directory(current directory) of hard disk in the DATA SERVER. This function is available even to "Fast Ethernet".... [read more]
    ds_chghdddir
    Fanuc Focas Library | Data | ds_copyhddfile
    Description The file in the hard disk of the DATA SERVER is copied. In this function, the control returns to the application without only requesting the copy of the file... [read more]
    ds_copyhddfile
    Fanuc Focas Library | Data | ds_delhdddir
    Description Delete the directory in the hard disk of the DATA SERVER.... [read more]
    ds_delhdddir
    Fanuc Focas Library | Data | ds_delhddfile
    Description The file in the hard drive of the DATA SERVER is deleted. The some files can be deleted simultaneously by specifying wild-card("*","?"). In this function,... [read more]
    ds_delhddfile
    Fanuc Focas Library | Data | ds_delhostfile
    Description Delete the file of host computer. The wild-card("*", "?") cannot be used to specify the name.... [read more]
    ds_delhostfile
    Fanuc Focas Library | Data | ds_download
    Description Outputs data to be registered(downloading). This function is only for "Fast Ethernet board". This function is not supported at "Embedded... [read more]
    ds_download
    Fanuc Focas Library | Data | ds_dwnend
    Description Notifies the end of downloading data to CNC. (This function must be executed after... [read more]
    ds_dwnend
    Fanuc Focas Library | Data | ds_formathdd
    Description The hard disk is formatted(initialization).... [read more]
    ds_formathdd
    Fanuc Focas Library | Data | ds_gethostfile
    Description The file of the host computer is transferred to the hard disk of the DATA SERVER according to the "get" command of the FTP.... [read more]
    ds_gethostfile
    Fanuc Focas Library | Data | ds_ldelhddfile
    Description The files in the hard disk of the DATA SERVER are deleted according to the list file. The wild-card("*", "?")... [read more]
    ds_ldelhddfile
    Fanuc Focas Library | Data | ds_lgethostfile
    Description The files in the host computer are transferred to the hard disk of the DATA SERVER by the processing of FTP according to the... [read more]
    ds_lgethostfile
    Fanuc Focas Library | Data | ds_lputhddfile
    Description The files in the hard disk of the DATA SERVER are transferred to the host computer by the processing of FTP according to the... [read more]
    ds_lputhddfile
    Fanuc Focas Library | Data | ds_makehdddir
    Description Make the directory in the hard disk of the DATA SERVER.... [read more]
    ds_makehdddir
    Fanuc Focas Library | Data | ds_mgethostfile
    Description The files of the host computer are transferred to the hard disk of the DATA SERVER according to the "mget" command of the... [read more]
    ds_mgethostfile
    Fanuc Focas Library | Data | ds_mputhddfile
    Description The files in the hard disk of the DATA SERVER are transferred to the host computer according to the "mput" command of the... [read more]
    ds_mputhddfile
    Fanuc Focas Library | Data | ds_puthddfile
    Description The file in the hard disk of the DATA SERVER is transferred to the host computer side according to the "put" command of the FTP. The wild-card("*", "?") cannot... [read more]
    ds_puthddfile
    Fanuc Focas Library | Data | ds_rddnchddfile
    Description The file name which includes the PATH name in the hard disk which is setted for the DNC operation are acquired.... [read more]
    ds_rddnchddfile
    Fanuc Focas Library | Data | ds_rddnchostfile
    Description The connected host number and the file name in host computer for the DNC operation is acquired.... [read more]
    ds_rddnchostfile
    Fanuc Focas Library | Data | ds_rdfile
    Description Transfers file from DATA SERVER to hard disk on personal computer. This function is effective in only 16i/18i/21i. and, this function... [read more]
    ds_rdfile
    Fanuc Focas Library | Data | ds_rdhdddir
    Description Get the file information at each file. The following information is acquired at each file. - File name... [read more]
    ds_rdhdddir
    Fanuc Focas Library | Data | ds_rdhddinfo
    Description Get the information of hard disk of DATA SERVER. The following information can be acquired. - The remainder capacity of hard disk.... [read more]
    ds_rdhddinfo
    Fanuc Focas Library | Data | ds_rdhostdir
    Description Get the file information of host computer.... [read more]
    ds_rdhostdir
    Fanuc Focas Library | Data | ds_rdhostdir2
    Description Get the number of files and file information of login directory on the host computer. Information acquired in... [read more]
    ds_rdhostdir2
    Fanuc Focas Library | Data | ds_rdhostinfo
    Description Get the information of login directory of the host computer. The following information is acquired.... [read more]
    ds_rdhostinfo
    Fanuc Focas Library | Data | ds_rdhostno
    Description Get the host number of the connected host computer.... [read more]
    ds_rdhostno
    Fanuc Focas Library | Data | ds_rdm198hdddir
    Description The work directory for the M198(subprogram call) is acquired.... [read more]
    ds_rdm198hdddir
    Fanuc Focas Library | Data | ds_rdm198host
    Description Connected host number for the M198(subprogram call) is acquired.... [read more]
    ds_rdm198host
    Fanuc Focas Library | Data | ds_rdmntinfo
    Description The data for troubleshooting is acquired as maintenance information for the file transfer between the DATA SERVER and CNC.... [read more]
    ds_rdmntinfo
    Fanuc Focas Library | Data | ds_rdmode
    Description Get the mode for the DATA SERVER.... [read more]
    ds_rdmode
    Fanuc Focas Library | Data | ds_rdncfile
    Description The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]
    ds_rdncfile
    Fanuc Focas Library | Data | ds_rdncfile2
    Description The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]
    ds_rdncfile2
    Fanuc Focas Library | Data | ds_rdresult
    Description Get the execution result of the function for the following DATA SERVER.... [read more]
    ds_rdresult
    Fanuc Focas Library | Data | ds_renhddfile
    Description The file name in the hard disk of the DATA SERVER is changed.... [read more]
    ds_renhddfile
    Fanuc Focas Library | Data | ds_searchresult
    Description Gets the result of ds_searchword function.... [read more]
    ds_searchresult
    Fanuc Focas Library | Data | ds_searchword
    Description The string of the NC program in DATA SERVER at the running of M198/DNC in MEM/RMT mode is searched. The result of search can... [read more]
    ds_searchword
    Fanuc Focas Library | Data | ds_wrdnchddfile
    Description The file name in the hard disk of the DATA SERVER for DNC operation is set. The current work directory is... [read more]
    ds_wrdnchddfile
    Fanuc Focas Library | Data | ds_wrdnchostfile
    Description The file name of the host computer for DNC operation is set. The current connected host computer is set... [read more]
    ds_wrdnchostfile
    Fanuc Focas Library | Data | ds_wrfile
    Description Transfers file from hard disk on personal computer to DATA SERVER. This function is effective in only 16i/18i/21i. and, this function... [read more]
    ds_wrfile
    Fanuc Focas Library | Data | ds_wrhostno
    Description The host computer which works the FTP server which becomes the other party of the communication of the DATA SERVER is changed.... [read more]
    ds_wrhostno
    Fanuc Focas Library | Data | ds_wrm198hdddir
    Description The work directory for the M198(subprogram call) is set. The current directory in the hard disk of the... [read more]
    ds_wrm198hdddir
    Fanuc Focas Library | Data | ds_wrm198host
    Description Connected host number for the M198(subprogram call) is set. The connected host of now becomes the host for... [read more]
    ds_wrm198host
    Fanuc Focas Library | Data | ds_wrmode
    Description Set the mode for the DATA SERVER. The mode of the DATA SERVER which can be set is shown as follows.... [read more]
    ds_wrmode
    Fanuc Focas Library | Data | ds_wrncfile
    Description The NC program is outputted from the NC to the hard drive. Storage mode : To hard disk(or ATA) of DATA SERVER from CNC... [read more]
    ds_wrncfile
    Fanuc Focas Library | Data | etb_rderrmsg
    Description Get the error message which occurred in the Ethernet board. This function acquires the error message of the Ethernet board... [read more]
    etb_rderrmsg
    Fanuc Focas Library | Data | etb_rdparam
    Description Get the parameter of ethernet board. The following parameter can be acquired by this function.... [read more]
    etb_rdparam
    Fanuc Focas Library | Data | etb_wrparam
    Description Set the parameter for Ethernet board. The following parameter can be set to the Ethernet board. Parameter... [read more]
    etb_wrparam
    Fanuc Focas Library | Data | eth_clrlog
    Description Clear the logs for Ethernet function : Embedded Ethernet[Internal port ,PCMCIA Card], Fast Ethernet board, Fast DATA SERVER board, Windows CE... [read more]
    eth_clrlog
    Fanuc Focas Library | Data | eth_dschkdsk
    Description Check disk of ATA card on DATA SERVER.... [read more]
    eth_dschkdsk
    Fanuc Focas Library | Data | eth_dsformat
    Description Format ATA card on DATA SERVER.... [read more]
    eth_dsformat
    Fanuc Focas Library | Data | eth_rddsformat
    Description Get the format of ATA card on DATA SERVER.... [read more]
    eth_rddsformat
    Fanuc Focas Library | Data | eth_rddsm198dir
    Description Get the work folder for the M198 on DATA SERVER using Strage mode.... [read more]
    eth_rddsm198dir
    Fanuc Focas Library | Data | eth_rddsm198host
    Description Get the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]
    eth_rddsm198host
    Fanuc Focas Library | Data | eth_rddsmode
    Description Get the all channel modes on DATA SERVER.... [read more]
    eth_rddsmode
    Fanuc Focas Library | Data | eth_rddsstate
    Description Get each path of maintenance information on DATA SERVER.... [read more]
    eth_rddsstate
    Fanuc Focas Library | Data | eth_rdhost
    Description Get the host number selected current Ethernet function.... [read more]
    eth_rdhost
    Fanuc Focas Library | Data | eth_rdlog
    MTConnect Fanuc Adapter... [read more]
    eth_rdlog
    Fanuc Focas Library | Data | eth_rdparam
    Description Get the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]
    eth_rdparam
    Fanuc Focas Library | Data | eth_wrdsm198dir
    Description Set the work folder for the M198 on DATA SERVER using Strage mode.... [read more]
    eth_wrdsm198dir
    Fanuc Focas Library | Data | eth_wrdsm198host
    Description Set the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]
    eth_wrdsm198host
    Fanuc Focas Library | Data | eth_wrdsmode
    Description Change the mode for DATA SERVER function.... [read more]
    eth_wrdsmode
    Fanuc Focas Library | Data | eth_wrhost
    Description Set the host number selected Ethernet function.... [read more]
    eth_wrhost
    Fanuc Focas Library | Data | eth_wrparam
    Description Sets the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]
    eth_wrparam
    Fanuc Focas Library | Data | flist_Data
    CNC: Function Reference related to data server,DNC1,DNC2,OSI-Ethernet... [read more]
    flist_Data
    Modified: 2018-06-11