Therefore, normal termination of this function shows that downloading the file from the DATA SERVER has been started.
The result of downloading file must be got by cnc_dtsvupdnstat.
Don't use the data sever function(except DNC operation) at the CNC side until either EW_OK or EW_DTSRVR as the completion status is got by cnc_dtsvupdnstat after this function was finished.
* "Req." shows start request for download by this function.
* "ret=" is the completion status when cnc_dtsvupdnstat is done.
Throughout the prohibition term, the completion status of the following function is EW_BUSY.
Therefore, it is necessary to get either EW_OK or EW_DTSRVR as the completion status by cnc_dtsvupdnstat when this function was executed successfully.
Universal Fanuc Driver
Fanuc Focas Library CD
Arguments : HSSB
Specify the library handle. See "Library handle" for details.
Specify as follows using ASCII code. "O" + <4 figures> + "NULL"
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
In order to get more information for this err_no return value, execute cnc_getdtailerr function. The following details status will be set onto the member, err_no of ODBERR structure.
As for the other return codes or the details, see "Return status of Data window function"
For HSSB connection,
This function is related to the following CNC parameter.
See the manual of DATA SERVER for details.
0020 = 14 (must be set)
0022 = 14 (must be set)
2217#5 (influenced by setting)
0020=5 (must be set)
0900#0=0 (must be set)
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||X|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.