News CNCnetPDM About us Support  
         
  

CNC_SENDMESSAGE | DATA

Description

Sends message to the host computer. MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h"

FWLIBAPI short WINAPI cnc_sendmessage(unsigned short FlibHndl, char *msg);

Arguments : HSSB

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

msg   [ in ]

Sending message

Message must be terminated with NULL character.
Maximum length of the message including NULL is as follows.
  • Series 15
  • 75 characters
  • Series 16/18, 16i/18i/21i
  • 81 characters

    If the sending message is not terminated with NULL character, the operation of this function is not guaranteed.

    Return

    EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

    The major error codes are as follows.

    Return code Meaning/Error handling
    EW_NOOPT
    (6)
    No option
    The OSI-Ethernet option, and the extended driver/library function are necessary.
    EW_DATA
    (5)
    Data error
    'NULL' character has been sent.
    EW_REJECT
    (13)
    CNC execution rejected(only Series 16/18, 16i/18i/21i)
    OSI-Ethernet is initializing or restarting.

    As for the other return codes or the details, see "Return status of Data window function"

    CNC option

    For HSSB connection,

      This function needs the OSI-Ethernet option and the extended driver/library function.

    CNC parameter

    This function is not related to CNC parameter.

    CNC mode

    This function can be used in any CNC mode.

    Available CNC

    0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
    M (Machining)X X X X H X H H X H H H H H H X X
    T (Turning) X X X X H - H H X H H H H H H X X
    LC (Loader) - - - - - - X X X X X X X X X - -

    0i-D0i-F16i18i30i-A30i-B
    P (Punch press)X X X X - X
    L (Laser) - - X - - X
    W (Wire) - - X X X X


    Power Mate i-DX
    Power Mate i-HX
    Power Motion i-AX

    "O" : Both Ethernet and HSSB
    "E" : Ethernet
    "H" : HSSB
    "X" : Cannot be used
    "-" : None

    Note) 0i-C does not support the HSSB function.

    Privacy notice

    This website uses cookies. By continuing to use it you agree to our privacy policy. 

    https://www.inventcom.net/fanuc-focas-library/data/cnc_sendmessage

    Fanuc Focas Library | Data | cnc_clrmsgbuff

    Clears the receive buffer or the transmit buffer.... [read more]
    cnc_clrmsgbuff

    Fanuc Focas Library | Data | cnc_dschdir

    DATA SERVER Changing a current folder of the ATA card with DATA SERVER function. DATA SERVER Host... [read more]
    cnc_dschdir

    Fanuc Focas Library | Data | cnc_dscopyfile

    Copying a file in the ATA card with DATA SERVER function.... [read more]
    cnc_dscopyfile

    Fanuc Focas Library | Data | cnc_dsftpcancel

    This function is used to cancel the following operetions.... [read more]
    cnc_dsftpcancel

    Fanuc Focas Library | Data | cnc_dsftpstat

    The execution result(EW_OK/EW_DTSRVR) of the following function can be taken out only at once.... [read more]
    cnc_dsftpstat

    Fanuc Focas Library | Data | cnc_dsget_req

    Directs to GET a file to from a host computer at DATA SERVER. When this function is normally ended, it starts getting files from host... [read more]
    cnc_dsget_req

    Fanuc Focas Library | Data | cnc_dslistdel_req

    According to the list which exists in the ATA card of DATA SERVER functon, two or more files are deleted. When this function carries... [read more]
    cnc_dslistdel_req

    Fanuc Focas Library | Data | cnc_dslistget_req

    According to the list file which exists in the connection host of DATA SERVER function, the file transfer of two or more files is continuously carried... [read more]
    cnc_dslistget_req

    Fanuc Focas Library | Data | cnc_dslistput_req

    According to the list file which exists in the ATA card of DATA SERVER function ,the file transfer of two or more files is carried out to a connection... [read more]
    cnc_dslistput_req

    Fanuc Focas Library | Data | cnc_dsmget_req

    It directs to MGET a file from a host computer to DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]
    cnc_dsmget_req

    Fanuc Focas Library | Data | cnc_dsmkdir

    DATA SERVER A new folder is created to the current folder of the ATA card of DATA SERVER function. DATA SERVER... [read more]
    cnc_dsmkdir

    Fanuc Focas Library | Data | cnc_dsmput_req

    It directs to MPUT a file to a host computer from DATA SERVER. A wild card can be used for a file name and the file transfer of two or... [read more]
    cnc_dsmput_req

    Fanuc Focas Library | Data | cnc_dsput_req

    Directs to PUT a file to a host computer to DATA SERVER. When this function is normally ended, it starts putting files from host... [read more]
    cnc_dsput_req

    Fanuc Focas Library | Data | cnc_dsremove

    DATA SERVER The file in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER Host... [read more]
    cnc_dsremove

    Fanuc Focas Library | Data | cnc_dsrename

    DATA SERVER Changing the file or folder name which exist in the current folder of the ATA card of DATA SERVER... [read more]
    cnc_dsrename

    Fanuc Focas Library | Data | cnc_dsrmdir

    DATA SERVER The folder in the current folder of the ATA card of DATA SERVER function delete. DATA SERVER... [read more]
    cnc_dsrmdir

    Fanuc Focas Library | Data | cnc_dtsvchkdsk

    Checks the hard disk on the DATA SERVER whether there is an error sector etc. or not. If this function is executed while... [read more]
    cnc_dtsvchkdsk

    Fanuc Focas Library | Data | cnc_dtsvcnclupdn

    Cancels the following if it is being executed. - Download from DATA SERVER to CNC - Upload from CNC to... [read more]
    cnc_dtsvcnclupdn

    Fanuc Focas Library | Data | cnc_dtsvdelete

    Deletes the file in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvdelete

    Fanuc Focas Library | Data | cnc_dtsvdownload

    Orders the CNC to download the file from the DATA SERVER. Therefore, normal termination of this function shows that downloading the file from the DATA SERVER... [read more]
    cnc_dtsvdownload

    Fanuc Focas Library | Data | cnc_dtsvftpget

    Orders the DATA SERVER to get file from the host computer. Therefore, normal termination of this function shows that getting the file from the host computer... [read more]
    cnc_dtsvftpget

    Fanuc Focas Library | Data | cnc_dtsvftpput

    Orders the DATA SERVER to put file to the host computer. Therefore, normal termination of this function shows that putting the file to the host computer has... [read more]
    cnc_dtsvftpput

    Fanuc Focas Library | Data | cnc_dtsvftpstat

    The execution result of cnc_dtsvftpput ,... [read more]
    cnc_dtsvftpstat

    Fanuc Focas Library | Data | cnc_dtsvgetdncpg

    Gets the file name for DNC operation in the DATA SERVER.... [read more]
    cnc_dtsvgetdncpg

    Fanuc Focas Library | Data | cnc_dtsvgetmode

    Gets the current mode of the DATA SERVER(storage mode/buffer mode).... [read more]
    cnc_dtsvgetmode

    Fanuc Focas Library | Data | cnc_dtsvhdformat

    Formats the hard disk on the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvhdformat

    Fanuc Focas Library | Data | cnc_dtsvmntinfo

    Reads the following maintenance information for the DATA SERVER. This is the function for purposes of maintenance.... [read more]
    cnc_dtsvmntinfo

    Fanuc Focas Library | Data | cnc_dtsvrdcram

    Reads the contents of the interface buffer for the DATA SERVER. This is the function for purposes of maintenance.... [read more]
    cnc_dtsvrdcram

    Fanuc Focas Library | Data | cnc_dtsvrderrmsg

    Reads the message of the error occurred in the DATA SERVER.... [read more]
    cnc_dtsvrderrmsg

    Fanuc Focas Library | Data | cnc_dtsvrdfile

    Transfers file from DATA SERVER to hard disk on personal computer. This function is effective for the DATA SERVER board(10BASE-T), and... [read more]
    cnc_dtsvrdfile

    Fanuc Focas Library | Data | cnc_dtsvrdpgdir

    Reads the directory information in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvrdpgdir

    Fanuc Focas Library | Data | cnc_dtsvrdset

    Reads the setting data in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvrdset

    Fanuc Focas Library | Data | cnc_dtsvsavecram

    Saves the contents of the interface buffer for the DATA SERVER to the file by the name of COMMON.RAM in the hard disk of the DATA SERVER.... [read more]
    cnc_dtsvsavecram

    Fanuc Focas Library | Data | cnc_dtsvsetdncpg

    Sets the file name for DNC operation in the DATA SERVER.... [read more]
    cnc_dtsvsetdncpg

    Fanuc Focas Library | Data | cnc_dtsvsetmode

    Sets the current mode of the DATA SERVER(storage mode/buffer mode). If the mode of the DATA SERVER is changed, all the data in hard disk of the DATA... [read more]
    cnc_dtsvsetmode

    Fanuc Focas Library | Data | cnc_dtsvupdnstat

    The execution result of cnc_dtsvdownload ,... [read more]
    cnc_dtsvupdnstat

    Fanuc Focas Library | Data | cnc_dtsvupload

    Orders the CNC to upload the file to the DATA SERVER. Therefore, normal termination of this function shows that uploading the file to the DATA SERVER has been... [read more]
    cnc_dtsvupload

    Fanuc Focas Library | Data | cnc_dtsvwrfile

    Transfers file from hard disk on personal computer to DATA SERVER. This function is effective for the DATA SERVER board(10BASE-T), and 16i/18i/21i, 0i.... [read more]
    cnc_dtsvwrfile

    Fanuc Focas Library | Data | cnc_dtsvwrset

    Writes the setting data in the DATA SERVER. If this function is executed while... [read more]
    cnc_dtsvwrset

    Fanuc Focas Library | Data | cnc_rdcomlogmsg

    Reads logging message for DNC2.... [read more]
    cnc_rdcomlogmsg

    Fanuc Focas Library | Data | cnc_rdcomopemsg

    Reads operator's message for DNC1,DNC2.... [read more]
    cnc_rdcomopemsg

    Fanuc Focas Library | Data | cnc_rdcomparam

    Reads communication parameters for DNC1, DNC2 or OSI-Ethernet function.... [read more]
    cnc_rdcomparam

    Fanuc Focas Library | Data | cnc_rddncfname

    Reads the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]
    cnc_rddncfname

    Fanuc Focas Library | Data | cnc_rddsdevinfo

    All the number of pages , the use number of pages, the total number of entries, and the numberof use entries are taken out from an ATA... [read more]
    cnc_rddsdevinfo

    Fanuc Focas Library | Data | cnc_rddsdir

    DATA SERVER The current folder name of the ATA card of DATA SERVER function is taken out with a full path.... [read more]
    cnc_rddsdir

    Fanuc Focas Library | Data | cnc_rddsdncfile

    DATA SERVER The file name set to DNC operation at the time of the Storage mode of DATA SERVER function is taken out with... [read more]
    cnc_rddsdncfile

    Fanuc Focas Library | Data | cnc_rddsfile

    DATA SERVER The list of the files in the current folder of DATA SERVER function (a sub folder is included) is taken out.... [read more]
    cnc_rddsfile

    Fanuc Focas Library | Data | cnc_rdrcvmsg

    Reads contents of the receive buffer in which received message is stored. When this function is called, receipt status in CNC is... [read more]
    cnc_rdrcvmsg

    Fanuc Focas Library | Data | cnc_rdrcvstat

    Obtains receipt status of message for OSI-Ethernet. The receipt status becomes ON when CNC receives a message for OSI-Ethernet, and becomes OFF when... [read more]
    cnc_rdrcvstat

    Fanuc Focas Library | Data | cnc_rdsndmsg

    Reads contents of the transmit buffer in which transmitted message is stored.... [read more]
    cnc_rdsndmsg

    Fanuc Focas Library | Data | cnc_wrcomparam

    Writes communication parameters for DNC1,DNC2 or OSI-Ethernet function. When communication parameters are written to OSI-Ethernet board... [read more]
    cnc_wrcomparam

    Fanuc Focas Library | Data | cnc_wrdncfname

    Writes the name of the file in the host computer for DNC operation using DNC1, DNC2 or OSI-Ethernet function.... [read more]
    cnc_wrdncfname

    Fanuc Focas Library | Data | cnc_wrdsdncfile

    DATA SERVER The file for DNC operation at the time of the storage mode of DATA SERVER function is set up. DATA... [read more]
    cnc_wrdsdncfile

    Fanuc Focas Library | Data | ds_cancel

    The execution of the function for the following DATA SERVER is stopped.... [read more]
    ds_cancel

    Fanuc Focas Library | Data | ds_checkhdd

    Whether a defective sector exists in the hard disk is checked.... [read more]
    ds_checkhdd

    Fanuc Focas Library | Data | ds_chghdddir

    Change the work directory(current directory) of hard disk in the DATA SERVER. This function is available even to Fast Ethernet.... [read more]
    ds_chghdddir

    Fanuc Focas Library | Data | ds_copyhddfile

    The file in the hard disk of the DATA SERVER is copied. In this function, the control returns to the application without only requesting the copy of the file... [read more]
    ds_copyhddfile

    Fanuc Focas Library | Data | ds_delhdddir

    Delete the directory in the hard disk of the DATA SERVER.... [read more]
    ds_delhdddir

    Fanuc Focas Library | Data | ds_delhddfile

    The file in the hard drive of the DATA SERVER is deleted. The some files can be deleted simultaneously by specifying wild-card(*,?). In this function,... [read more]
    ds_delhddfile

    Fanuc Focas Library | Data | ds_delhostfile

    Delete the file of host computer. The wild-card(*, ?) cannot be used to specify the name.... [read more]
    ds_delhostfile

    Fanuc Focas Library | Data | ds_download

    Outputs data to be registered(downloading). This function is only for Fast Ethernet board. This function is not supported at Embedded... [read more]
    ds_download

    Fanuc Focas Library | Data | ds_dwnend

    Notifies the end of downloading data to CNC. (This function must be executed after... [read more]
    ds_dwnend

    Fanuc Focas Library | Data | ds_dwnstart

    Requests CNC to start downloading. (This function must be executed before... [read more]
    ds_dwnstart

    Fanuc Focas Library | Data | ds_formathdd

    The hard disk is formatted(initialization).... [read more]
    ds_formathdd

    Fanuc Focas Library | Data | ds_gethostfile

    The file of the host computer is transferred to the hard disk of the DATA SERVER according to the get command of the FTP.... [read more]
    ds_gethostfile

    Fanuc Focas Library | Data | ds_ldelhddfile

    The files in the hard disk of the DATA SERVER are deleted according to the list file. The wild-card(*, ?)... [read more]
    ds_ldelhddfile

    Fanuc Focas Library | Data | ds_lgethostfile

    The files in the host computer are transferred to the hard disk of the DATA SERVER by the processing of FTP according to the... [read more]
    ds_lgethostfile

    Fanuc Focas Library | Data | ds_lputhddfile

    The files in the hard disk of the DATA SERVER are transferred to the host computer by the processing of FTP according to the... [read more]
    ds_lputhddfile

    Fanuc Focas Library | Data | ds_makehdddir

    Make the directory in the hard disk of the DATA SERVER.... [read more]
    ds_makehdddir

    Fanuc Focas Library | Data | ds_mgethostfile

    The files of the host computer are transferred to the hard disk of the DATA SERVER according to the mget command of the... [read more]
    ds_mgethostfile

    Fanuc Focas Library | Data | ds_mputhddfile

    The files in the hard disk of the DATA SERVER are transferred to the host computer according to the mput command of the... [read more]
    ds_mputhddfile

    Fanuc Focas Library | Data | ds_puthddfile

    The file in the hard disk of the DATA SERVER is transferred to the host computer side according to the put command of the FTP. The wild-card(*, ?) cannot... [read more]
    ds_puthddfile

    Fanuc Focas Library | Data | ds_rddnchddfile

    The file name which includes the PATH name in the hard disk which is setted for the DNC operation are acquired.... [read more]
    ds_rddnchddfile

    Fanuc Focas Library | Data | ds_rddnchostfile

    The connected host number and the file name in host computer for the DNC operation is acquired.... [read more]
    ds_rddnchostfile

    Fanuc Focas Library | Data | ds_rdfile

    Transfers file from DATA SERVER to hard disk on personal computer. This function is effective in only 16i/18i/21i. and, this function... [read more]
    ds_rdfile

    Fanuc Focas Library | Data | ds_rdhdddir

    Get the file information at each file. The following information is acquired at each file. - File name... [read more]
    ds_rdhdddir

    Fanuc Focas Library | Data | ds_rdhddinfo

    Get the information of hard disk of DATA SERVER. The following information can be acquired. - The remainder capacity of hard disk.... [read more]
    ds_rdhddinfo

    Fanuc Focas Library | Data | ds_rdhostdir

    Get the file information of host computer.... [read more]
    ds_rdhostdir

    Fanuc Focas Library | Data | ds_rdhostdir2

    Get the number of files and file information of login directory on the host computer. Information acquired in... [read more]
    ds_rdhostdir2

    Fanuc Focas Library | Data | ds_rdhostinfo

    Get the information of login directory of the host computer. The following information is acquired.... [read more]
    ds_rdhostinfo

    Fanuc Focas Library | Data | ds_rdhostno

    Get the host number of the connected host computer.... [read more]
    ds_rdhostno

    Fanuc Focas Library | Data | ds_rdm198hdddir

    The work directory for the M198(subprogram call) is acquired.... [read more]
    ds_rdm198hdddir

    Fanuc Focas Library | Data | ds_rdm198host

    Connected host number for the M198(subprogram call) is acquired.... [read more]
    ds_rdm198host

    Fanuc Focas Library | Data | ds_rdmntinfo

    The data for troubleshooting is acquired as maintenance information for the file transfer between the DATA SERVER and CNC.... [read more]
    ds_rdmntinfo

    Fanuc Focas Library | Data | ds_rdmode

    Get the mode for the DATA SERVER.... [read more]
    ds_rdmode

    Fanuc Focas Library | Data | ds_rdncfile

    The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]
    ds_rdncfile

    Fanuc Focas Library | Data | ds_rdncfile2

    The NC program is inputted from the hard drive to the NC. Storage mode : To CNC memory from hard disk(or ATA) of DATA SERVER... [read more]
    ds_rdncfile2

    Fanuc Focas Library | Data | ds_rdresult

    Get the execution result of the function for the following DATA SERVER.... [read more]
    ds_rdresult

    Fanuc Focas Library | Data | ds_renhddfile

    The file name in the hard disk of the DATA SERVER is changed.... [read more]
    ds_renhddfile

    Fanuc Focas Library | Data | ds_searchresult

    Gets the result of ds_searchword function.... [read more]
    ds_searchresult

    Fanuc Focas Library | Data | ds_searchword

    The string of the NC program in DATA SERVER at the running of M198/DNC in MEM/RMT mode is searched. The result of search can... [read more]
    ds_searchword

    Fanuc Focas Library | Data | ds_wrdnchddfile

    The file name in the hard disk of the DATA SERVER for DNC operation is set. The current work directory is... [read more]
    ds_wrdnchddfile

    Fanuc Focas Library | Data | ds_wrdnchostfile

    The file name of the host computer for DNC operation is set. The current connected host computer is set... [read more]
    ds_wrdnchostfile

    Fanuc Focas Library | Data | ds_wrfile

    Transfers file from hard disk on personal computer to DATA SERVER. This function is effective in only 16i/18i/21i. and, this function... [read more]
    ds_wrfile

    Fanuc Focas Library | Data | ds_wrhostno

    The host computer which works the FTP server which becomes the other party of the communication of the DATA SERVER is changed.... [read more]
    ds_wrhostno

    Fanuc Focas Library | Data | ds_wrm198hdddir

    The work directory for the M198(subprogram call) is set. The current directory in the hard disk of the... [read more]
    ds_wrm198hdddir

    Fanuc Focas Library | Data | ds_wrm198host

    Connected host number for the M198(subprogram call) is set. The connected host of now becomes the host for... [read more]
    ds_wrm198host

    Fanuc Focas Library | Data | ds_wrmode

    Set the mode for the DATA SERVER. The mode of the DATA SERVER which can be set is shown as follows.... [read more]
    ds_wrmode

    Fanuc Focas Library | Data | ds_wrncfile

    The NC program is outputted from the NC to the hard drive. Storage mode : To hard disk(or ATA) of DATA SERVER from CNC... [read more]
    ds_wrncfile

    Fanuc Focas Library | Data | etb_rderrmsg

    Get the error message which occurred in the Ethernet board. This function acquires the error message of the Ethernet board... [read more]
    etb_rderrmsg

    Fanuc Focas Library | Data | etb_rdparam

    Get the parameter of ethernet board. The following parameter can be acquired by this function.... [read more]
    etb_rdparam

    Fanuc Focas Library | Data | etb_wrparam

    Set the parameter for Ethernet board. The following parameter can be set to the Ethernet board. Parameter... [read more]
    etb_wrparam

    Fanuc Focas Library | Data | eth_clrlog

    Clear the logs for Ethernet function : Embedded Ethernet[Internal port ,PCMCIA Card], Fast Ethernet board, Fast DATA SERVER board, Windows CE... [read more]
    eth_clrlog

    Fanuc Focas Library | Data | eth_dschkdsk

    Check disk of ATA card on DATA SERVER.... [read more]
    eth_dschkdsk

    Fanuc Focas Library | Data | eth_dsformat

    Format ATA card on DATA SERVER.... [read more]
    eth_dsformat

    Fanuc Focas Library | Data | eth_rddsformat

    Get the format of ATA card on DATA SERVER.... [read more]
    eth_rddsformat

    Fanuc Focas Library | Data | eth_rddsm198dir

    Get the work folder for the M198 on DATA SERVER using Strage mode.... [read more]
    eth_rddsm198dir

    Fanuc Focas Library | Data | eth_rddsm198host

    Get the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]
    eth_rddsm198host

    Fanuc Focas Library | Data | eth_rddsmode

    Get the all channel modes on DATA SERVER.... [read more]
    eth_rddsmode

    Fanuc Focas Library | Data | eth_rddsstate

    Get each path of maintenance information on DATA SERVER.... [read more]
    eth_rddsstate

    Fanuc Focas Library | Data | eth_rdhost

    Get the host number selected current Ethernet function.... [read more]
    eth_rdhost

    Fanuc Focas Library | Data | eth_rdlog

    MTConnect Fanuc Adapter... [read more]
    eth_rdlog

    Fanuc Focas Library | Data | eth_rdparam

    Get the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]
    eth_rdparam

    Fanuc Focas Library | Data | eth_wrdsm198dir

    Set the work folder for the M198 on DATA SERVER using Strage mode.... [read more]
    eth_wrdsm198dir

    Fanuc Focas Library | Data | eth_wrdsm198host

    Set the connected host number and work folder for the M198 on DATA SERVER using FTP mode.... [read more]
    eth_wrdsm198host

    Fanuc Focas Library | Data | eth_wrdsmode

    Change the mode for DATA SERVER function.... [read more]
    eth_wrdsmode

    Fanuc Focas Library | Data | eth_wrhost

    Set the host number selected Ethernet function.... [read more]
    eth_wrhost

    Fanuc Focas Library | Data | eth_wrparam

    Sets the parameters for Ethernet function : Fast Ethernet board, Fast DATA SERVER... [read more]
    eth_wrparam

    Fanuc Focas Library | Data | flist_Data

    CNC: Function Reference related to data server,DNC1,DNC2,OSI-Ethernet... [read more]
    flist_Data
    Modified: 2018-06-11