NewsCNCnetPDMAbout usSupport

CNC_SDTENDSMPL2 | MOTOR

Description

The end of sampling is notified.
In case that the error occurred by cnc_sdtreadsmpl2, execute this function.

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI cnc_sdtendsmpl2(unsigned short FlibHndl);

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_REJECT
(13)
CNC execution denied

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

    The extended driver/library function is necessary.

For Ethernet connection,

    The Ethernet function and the extended driver/library function are necessary.

    However, in case of 0i-D/F, Series 30i and PMi-A, the required CNC option is as follows.

    When Embedded Ethernet is used,

    above two optional functions are not required.

    When Ethernet board is used,

    only Ethernet function is required.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X O X X X X X X X X X X X X O
T (Turning) X X X O X - X X X X X X X X X X O
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X X X - X
L (Laser) - - X - - X
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

cnc_sdtclrchnl   cnc_sdtsetchnl2   cnc_sdtstartsmpl2   cnc_sdtcancelsmpl   cnc_sdtreadsmpl2   cnc_sdtread1shot  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/motor/cnc_sdtendsmpl2

Fanuc Focas Library | Motor | cnc_loadtorq

Reads abnormal load torque data (estimated load torque) of servo motors or spindle motors. Data is stored in ODBLOAD structure in signed binary form. motor... [read more]
Fanuc Focas Library | Motor | cnc_loadtorq

Fanuc Focas Library | Motor | cnc_rdctrldi

Reads control input signal for spindle monitor.... [read more]
Fanuc Focas Library | Motor | cnc_rdctrldi

Fanuc Focas Library | Motor | cnc_rdctrldo

Reads control output signal for spindle monitor.... [read more]
Fanuc Focas Library | Motor | cnc_rdctrldo

Fanuc Focas Library | Motor | cnc_rdcurrent

Reads The servo adjustment real current. When the following parameter is '0', '0' is... [read more]
Fanuc Focas Library | Motor | cnc_rdcurrent

Fanuc Focas Library | Motor | cnc_rdfromservoid2

Read specified servo id information from FROM. Each information is stored in member of the ODBCSVID2 structure.... [read more]
Fanuc Focas Library | Motor | cnc_rdfromservoid2

Fanuc Focas Library | Motor | cnc_rdfromspindleid2

Read specified spindle id information from FROM. Each information is stored in member of the ODBCSPID2 structure.... [read more]
Fanuc Focas Library | Motor | cnc_rdfromspindleid2

Fanuc Focas Library | Motor | cnc_rdloopgain

Reads The servo adjustment loop gain.... [read more]
Fanuc Focas Library | Motor | cnc_rdloopgain

Fanuc Focas Library | Motor | cnc_rdnspdl

Reads the number of spindles which CNC can control. It is not the number of mounted spindles.... [read more]
Fanuc Focas Library | Motor | cnc_rdnspdl

Fanuc Focas Library | Motor | cnc_rdopmode

Reads The operation mode for spindle adjustment.... [read more]
Fanuc Focas Library | Motor | cnc_rdopmode

Fanuc Focas Library | Motor | cnc_rdposerrs

Reads The position deflection S for spindle adjustment. The position deflection S is valid only when... [read more]
Fanuc Focas Library | Motor | cnc_rdposerrs

Fanuc Focas Library | Motor | cnc_rdposerrs2

Reads The position deflection S1, S2 for spindle adjustment in the synchronous control mode. The... [read more]
Fanuc Focas Library | Motor | cnc_rdposerrs2

Fanuc Focas Library | Motor | cnc_rdposerrz

Reads The position deflection Z for spindle adjustment in the rigid tapping mode. The position... [read more]
Fanuc Focas Library | Motor | cnc_rdposerrz

Fanuc Focas Library | Motor | cnc_rdservoid2

Read specified servo id information from adaptation device. Each information is stored in member of the ODBCSVID2 structure.... [read more]
Fanuc Focas Library | Motor | cnc_rdservoid2

Fanuc Focas Library | Motor | cnc_rdspdlalm

Reads the alarm number corresponding to the message of spindle alarm for spindle monitor.... [read more]
Fanuc Focas Library | Motor | cnc_rdspdlalm

Fanuc Focas Library | Motor | cnc_rdspindleid2

Read specified spindle id information from adaptation device. Each information is stored in member of the ODBCSPID2 structure.... [read more]
Fanuc Focas Library | Motor | cnc_rdspindleid2

Fanuc Focas Library | Motor | cnc_rdsrvspeed

Reads The servo adjustment real speed.... [read more]
Fanuc Focas Library | Motor | cnc_rdsrvspeed

Fanuc Focas Library | Motor | cnc_rdsynerrrg

Reads The synchronous error for spindle adjustment in the rigid tapping mode. The synchronous error... [read more]
Fanuc Focas Library | Motor | cnc_rdsynerrrg

Fanuc Focas Library | Motor | cnc_rdsynerrsy

Reads The synchronous error for spindle adjustment in the synchronous control mode. The synchronous... [read more]
Fanuc Focas Library | Motor | cnc_rdsynerrsy

Fanuc Focas Library | Motor | cnc_sdtcancelsmpl

Cancel of sampling is notified. If you want to cancel the sampling after sampling starts, execute this function. This function can be... [read more]
Fanuc Focas Library | Motor | cnc_sdtcancelsmpl

Fanuc Focas Library | Motor | cnc_sdtclrchnl

The channel data setting for sampling is cleared. When you change the channel data number for sampling, beforehand execute this... [read more]
Fanuc Focas Library | Motor | cnc_sdtclrchnl

Fanuc Focas Library | Motor | cnc_sdtendsmpl

The end of sampling is notified. In case that the error occurred by cnc_sdtreadsmpl, execute this function.... [read more]
Fanuc Focas Library | Motor | cnc_sdtendsmpl

Fanuc Focas Library | Motor | cnc_sdtread1shot

Read the data for 8 channels that are set by cnc_sdtsetchnl function.... [read more]
Fanuc Focas Library | Motor | cnc_sdtread1shot

Fanuc Focas Library | Motor | cnc_sdtreadsmpl

Reads the sampling data. (The cycle of sampling is 1msec.)... [read more]
Fanuc Focas Library | Motor | cnc_sdtreadsmpl

Fanuc Focas Library | Motor | cnc_sdtreadsmpl2

Reads the sampling data. In case of using cnc_sdtstartsmpl2, acquire data immediately after the function call by this function. Trigger... [read more]
Fanuc Focas Library | Motor | cnc_sdtreadsmpl2

Fanuc Focas Library | Motor | cnc_sdtsetchnl

The channel data for the sampling of various data of Servo and Spindle are set. As for the data which can be acquired, refer to... [read more]
Fanuc Focas Library | Motor | cnc_sdtsetchnl

Fanuc Focas Library | Motor | cnc_sdtsetchnl2

The channel data for the sampling of various data are set. The setting to acquire servo, spindle information and ,in addition, PMC signal and CNC... [read more]
Fanuc Focas Library | Motor | cnc_sdtsetchnl2

Fanuc Focas Library | Motor | cnc_sdtstartsmpl

The start of sampling is notified. When the block of the specified sequence number is executed, sampling is... [read more]
Fanuc Focas Library | Motor | cnc_sdtstartsmpl

Fanuc Focas Library | Motor | cnc_sdtstartsmpl2

The start of sampling is notified. In case of cnc_sdtstartsmpl, start sampling after... [read more]
Fanuc Focas Library | Motor | cnc_sdtstartsmpl2

Fanuc Focas Library | Motor | cnc_wrfromservoid2

Write specified servo id information to FROM.... [read more]
Fanuc Focas Library | Motor | cnc_wrfromservoid2

Fanuc Focas Library | Motor | cnc_wrfromspindleid2

Write specified spindle id information to FROM.... [read more]
Fanuc Focas Library | Motor | cnc_wrfromspindleid2

Fanuc Focas Library | Motor | flist_Motor

CNC: Function related to servo/spindle... [read more]
Fanuc Focas Library | Motor | flist_Motor
Modified: 2023-12-05