Reads "The synchronous error for spindle adjustment" in the synchronous control mode.
The synchronous error in the rigid tapping mode is able to be acquired by cnc_rdsynerrrg function.
This synchronous error is valid only during the synchronous control mode.
Universal Fanuc Driver
Fanuc Focas Library CD
Specify the library handle. See "Library handle" for details.
Specify the address of the variable to store the synchronous error in the synchronous control mode.
EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.
The major error codes are as follows.
|Return code||Meaning/Error handling|
The serial spindle function and the extended driver/library function are necessary.
As for the other return codes or the details, see "Return status of Data window function"
This function need the following CNC option.
And this function is related to the following CNC option.
- The spindle orientation function
- The rigid tapping function
- The Cs contouring control function
- The spindle positioning function (only Series 16T/18T/21T, 16iT/18iT/21iT, 0i-F, 30i)
- The multi spindle control (only Series 16T/18T/21T, 16iT/18iT/21iT, 0i-F, 30i)
For HSSB connection,
For Ethernet connection,
The Ethernet function and the extended driver/library function are necessary. However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows. When Embedded Ethernet is used,
above two optional functions are not required.
The Ethernet function and the extended driver/library function are necessary.
However, in case of Series 16i/18i/21i-B, 0i-B/C/D/F, Series 30i and PMi-A, the required CNC option is as follows.
When Embedded Ethernet is used,
When Ethernet board is used,
- only Ethernet function is required.
This function is related to the following CNC parameter.
See the manual of CNC parameter for details.
Parameters concerning the spindle control function.
This function can be used in any CNC mode.
|P (Punch press)||-|
|Power Mate i-D|
|Power Mate i-H|
|Power Motion i-A||X|
|"O"||:||Both Ethernet and HSSB|
|"X"||:||Cannot be used|
Note) 0i-C does not support the HSSB function.