News CNCnetPDM About us Support  
         
  

CNC_CLR5AXPLS | POSITION

Description

Clears the pulse amount for the manual feed for 5-axis machining.

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI cnc_clr5axpls(unsigned short FlibHndl, short type);

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

type   [ in ]

Specify the type of pulse amount to be cleared.

typePulse amount
1 Tip center (C1)
2 Tip center (C2)
3 Tool axis (TD)
4 Tool axis (R1)
5 Tool axis (R2)
6 Table (VR)
7 Table (H1)
8 Table (H2)
-1 All pulse amount

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_NUMBER
(3)
the clear pulse type(type) is wrong.
EW_NOOPT
(6)
No option
The extended driver/library function and the manual feed for 5-axis machining are necessary.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

For HSSB connection,

    The extended driver/library function and the manual feed for 5-axis machining are necessary.

CNC parameter

This function is not related to CNC parameter.

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X X X X X X X X X X O O O O O
T (Turning) X X X X X - X X X X X X O O O O O
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X X X - X
L (Laser) - - X - - X
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

cnc_rd5axmandt   cnc_rd5axovrlap  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/position/cnc_clr5axpls
Fanuc Focas Library | Position | cnc_absolute
Description Reads the absolute position data of axis specified with "axis". The absolute position is stored in "data[0]" of "ODBAXIS". All axes can be read at a time by... [read more]
cnc_absolute
Fanuc Focas Library | Position | cnc_absolute2
Description Differences between functions of cnc_absolute2 and functions of... [read more]
cnc_absolute2
Fanuc Focas Library | Position | cnc_accdecdly
Description Reads the acceleration/deceleration delay amount of axis specified with "axis". The acceleration/deceleration delay amount is stored in "data[0]" of... [read more]
cnc_accdecdly
Fanuc Focas Library | Position | cnc_actf
Description Reads the actual feed rate of the controlled axes of CNC. The actual feed rate is stored in "data" of "ODBACT".... [read more]
cnc_actf
Fanuc Focas Library | Position | cnc_acts
Description Reads the actual rotational speed of the spindle connected to CNC. The actual spindle speed is stored in "data" of "ODBACT".... [read more]
cnc_acts
Fanuc Focas Library | Position | cnc_acts2
Description Reads the actual rotational speed of the spindle connected to CNC. The actual spindle speed is stored in "data[0]" of "ODBACT2". All spindle can be... [read more]
cnc_acts2
Fanuc Focas Library | Position | cnc_canmovrlap
Description Cancel the manual overlapped motion value of axis specified with "axis". It is possible to cancel the manual overlapped motion value of all axes at a... [read more]
cnc_canmovrlap
Fanuc Focas Library | Position | cnc_clr3dplsmov
Description Clears the handle interrupt pulse amount and the handle interrupt move amount. It is only the handle interrupt pulse amount to be able to specify the... [read more]
cnc_clr3dplsmov
Fanuc Focas Library | Position | cnc_distance
Description Reads the amount of distance to go of axis specified with "axis". The amount of distance to go is stored in "data[0]" of "ODBAXIS". All axes can be read... [read more]
cnc_distance
Fanuc Focas Library | Position | cnc_exaxisname
Description Reads the name of controlled axis and spindle name from 1st by the specified (*num), with supporting "extended axis name". After execution,... [read more]
cnc_exaxisname
Fanuc Focas Library | Position | cnc_exaxisname2
Description Reads the name of controlled axis and spindle name from 1st by the specified (*num), with supporting "extended axis name". After execution,... [read more]
cnc_exaxisname2
Fanuc Focas Library | Position | cnc_machine
Description Reads the machine position data of axis specified with "axis". The machine position is stored in "data[0]" of "ODBAXIS". All axes can be read at a time... [read more]
cnc_machine
Fanuc Focas Library | Position | cnc_prstwkcd
Description Presets the word coordinate selecting in CNC(absolute position). Preset data is specified by "data[0]" in "IDBWRA". It is... [read more]
cnc_prstwkcd
Fanuc Focas Library | Position | cnc_rd3dmovrlap
Description Reads the movement amount (generally for 5 axes, in case of parallel axis, 5 + 5 = 10 axes) about 3-dimensional handle feed. The number of... [read more]
cnc_rd3dmovrlap
Fanuc Focas Library | Position | cnc_rd3dofschg
Description Read the modification of tool length compensation amount in tool axis direction. The places of decimal points can be got by... [read more]
cnc_rd3dofschg
Fanuc Focas Library | Position | cnc_rd3dpulse
Description Reads the handle interrupt pulse amount about 3-dimensional handle feed. The handle interrupt pulse amount in special handle feed mode(G156#0,... [read more]
cnc_rd3dpulse
Fanuc Focas Library | Position | cnc_rd3dtooltip
Description Reads the absolute position of the tool tip coordinates about 3-dimensional handle feed. The number of each axis and the tool... [read more]
cnc_rd3dtooltip
Fanuc Focas Library | Position | cnc_rd5axmandt
Description Reads the data for the manual feed for 5-axis machining.... [read more]
cnc_rd5axmandt
Fanuc Focas Library | Position | cnc_rd5axovrlap
Description Reads the machine axis movement for the manual feed of 5-axis machining. The axis number(axis) should be specified as 1..max controlled axes (for reading... [read more]
cnc_rd5axovrlap
Fanuc Focas Library | Position | cnc_rdaxisdata
Description Reads various data relating servo axis/spindle axis that is got by... [read more]
cnc_rdaxisdata
Fanuc Focas Library | Position | cnc_rdaxisname
Description Reads the axis names from 1st axis to the specified axis number. In case that "*data_num" is bigger than the current controlled axis number, this... [read more]
cnc_rdaxisname
Fanuc Focas Library | Position | cnc_rddynamic
Description Read various data which changes at CNC operation at a time. The data which can be read is as follows. Data Function... [read more]
cnc_rddynamic
Fanuc Focas Library | Position | cnc_rddynamic2
Description Reads various data which changes at CNC operation at a time. This function is the improved version of the... [read more]
cnc_rddynamic2
Fanuc Focas Library | Position | cnc_rdhndintrpt
Description Reads the handle interruption values from 1st axis to the specified axis number. In case that "data_num" is bigger than the current controlled axis... [read more]
cnc_rdhndintrpt
Fanuc Focas Library | Position | cnc_rdmovrlap
Description Read the manual overlapped motion value based on the input unit and based on the output unit. All axes can be read at a time by specifying ALL_AXES for... [read more]
cnc_rdmovrlap
Fanuc Focas Library | Position | cnc_rdposition
Description Reads the positions from 1st axis to the specified axis number. In case that "*data_num" is bigger than the current controlled axis number,... [read more]
cnc_rdposition
Fanuc Focas Library | Position | cnc_rdspcss
Description Reads the following data related to constant surface speed control on CNC side. Converted spindle speed value... [read more]
cnc_rdspcss
Fanuc Focas Library | Position | cnc_rdspdlname
Description Reads the spindle names from 1st spindle to the specified spindle number. In case that "*data_num" is bigger than all spindle number, this function sets... [read more]
cnc_rdspdlname
Fanuc Focas Library | Position | cnc_rdspdlspeed
Description This function does the calculation for serial spindle by which the gear ratio was considered against the rotation speed of spindle motor.... [read more]
cnc_rdspdlspeed
Fanuc Focas Library | Position | cnc_rdspeed
Description Reads the actual feed rate and the actual rotational speed of the spindle. The spindle speed, which can be read in this function, is one of the... [read more]
cnc_rdspeed
Fanuc Focas Library | Position | cnc_rdspgear
Description Reads the gear ratio of the serial spindle. The gear ratio is stored in "data[0]" of "ODBSPN". All spindle can be read at a time by specifying... [read more]
cnc_rdspgear
Fanuc Focas Library | Position | cnc_rdspload
Description Reads the load information of the serial spindle. The load information of the serial spindle is stored in "data[0]" of "ODBSPN". All spindle... [read more]
cnc_rdspload
Fanuc Focas Library | Position | cnc_rdspmaxrpm
Description Reads the maximum r.p.m. ratio of serial spindle. The gear ratio is stored in "data[0]" of "ODBSPN". All spindle can be read at a time by specifying... [read more]
cnc_rdspmaxrpm
Fanuc Focas Library | Position | cnc_rdspmeter
Description Reads the spindle load meter data and the spindle motor speed data from 1st spindle to the specified spindle number. In case that "data_num"... [read more]
cnc_rdspmeter
Fanuc Focas Library | Position | cnc_rdsvmeter
Description Reads the servo load meter data from 1st axis to the specified axis number. In case that "*data_num" is bigger than the servo axis number, this function... [read more]
cnc_rdsvmeter
Fanuc Focas Library | Position | cnc_relative
Description Reads the relative position data of axis specified with "axis". The relative position is stored in "data[0]" of "ODBAXIS". All axes can be read at a time... [read more]
cnc_relative
Fanuc Focas Library | Position | cnc_relative2
Description Differences between functions of cnc_relative2 and functions of... [read more]
cnc_relative2
Fanuc Focas Library | Position | cnc_skip
Description Reads the skipped position of axis specified with "axis". The skipped position is stored in "data[0]" of "ODBAXIS". All axes can be read at a time by... [read more]
cnc_skip
Fanuc Focas Library | Position | cnc_srvdelay
Description Reads the servo delay amount of axis specified with "axis". The servo delay amount is stored in "data[0]" of "ODBAXIS". All axes can be read at a time by... [read more]
cnc_srvdelay
Fanuc Focas Library | Position | cnc_wrrelpos
Description Sets again relative position against the axis specified with "type". Preset data is specified by "data[0]" in "IDBWRR". If 0 is... [read more]
cnc_wrrelpos
Fanuc Focas Library | Position | flist_Position
CNC: Function related to controlled axis/spindle... [read more]
flist_Position
Modified: 2018-06-11