News CNCnetPDM About us Support  
         
  

FLIST_POSITION | POSITION

CNC: Function related to controlled axis/spindle

Function Name Brief description
cnc_actf Read actual axis feedrate(F)
cnc_absolute Read absolute axis position
cnc_absolute2 Read absolute axis position 2
cnc_machine Read machine axis position
cnc_relative Read relative axis position
cnc_relative2 Read relative axis position 2
cnc_distance Read distance to go
cnc_rdposition Read position information
cnc_rdaxisdata Read various data relating servo axis or spindle axis
cnc_skip Read skip position
cnc_srvdelay Read servo delay value
cnc_accdecdly Read acceleration/deceleration delay value
cnc_rddynamic Read all dynamic data
cnc_rddynamic2 Read all dynamic data (2)
cnc_acts Read actual spindle speed(S)
cnc_acts2 Read actual spindle speed(S) (2)
cnc_rdspcss Read constant surface speed data
cnc_rdspeed Read speed information
cnc_wrrelpos Set origin/preset relative axis position
cnc_prstwkcd Preset work coordinate
cnc_rdmovrlap Read manual overlapped motion value
cnc_canmovrlap Cancel manual overlapped motion value
cnc_rdhndintrpt Read manual overlapped motion information
cnc_rdspload Read load information of serial spindle
cnc_rdspmaxrpm Read maximum r.p.m. ratio of serial spindle
cnc_rdspgear Read gear ratio of serial spindle
cnc_rdsvmeter Read servo load meter
cnc_rdspmeter Read spindle load meter
cnc_rd3dtooltip Read tool tip coordinates for 3-dimensional handle feed
cnc_rd3dpulse Read handle interrupt pulse amount for 3-dimensional handle feed
cnc_rd3dmovrlap Read handle interrupt move amount for 3-dimensional handle feed
cnc_rd3dofschg Read the modification of tool length compensation amount in tool axis dir. for 3-dimensional handle feed
cnc_clr3dplsmov Clear handle interrupt pulse and move amount for 3-dimensional handle feed
cnc_rdaxisname Read axis name
cnc_exaxisname Read the name of controlled axis and spindle name
cnc_exaxisname2 Read the name of controlled axis and spindle name(2)
cnc_rdspdlname Read spindle name
cnc_rd5axmandt Read the data for the manual feed for 5-axis machining
cnc_rd5axovrlap Read the machine axis movement for the manual feed for 5-axis machining
cnc_clr5axpls Clear the pulse amount for manual feed for 5-axis machining

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/position/flist_position

Fanuc Focas Library | Position | cnc_absolute

Reads the absolute position data of axis specified with axis. The absolute position is stored in data[0] of ODBAXIS. All axes can be read at a time by... [read more]
cnc_absolute

Fanuc Focas Library | Position | cnc_absolute2

Differences between functions of cnc_absolute2 and functions of... [read more]
cnc_absolute2

Fanuc Focas Library | Position | cnc_accdecdly

Reads the acceleration/deceleration delay amount of axis specified with axis. The acceleration/deceleration delay amount is stored in data[0] of... [read more]
cnc_accdecdly

Fanuc Focas Library | Position | cnc_actf

Reads the actual feed rate of the controlled axes of CNC. The actual feed rate is stored in data of ODBACT.... [read more]
cnc_actf

Fanuc Focas Library | Position | cnc_acts

Reads the actual rotational speed of the spindle connected to CNC. The actual spindle speed is stored in data of ODBACT.... [read more]
cnc_acts

Fanuc Focas Library | Position | cnc_acts2

Reads the actual rotational speed of the spindle connected to CNC. The actual spindle speed is stored in data[0] of ODBACT2. All spindle can be... [read more]
cnc_acts2

Fanuc Focas Library | Position | cnc_canmovrlap

Cancel the manual overlapped motion value of axis specified with axis. It is possible to cancel the manual overlapped motion value of all axes at a... [read more]
cnc_canmovrlap

Fanuc Focas Library | Position | cnc_clr3dplsmov

Clears the handle interrupt pulse amount and the handle interrupt move amount. It is only the handle interrupt pulse amount to be able to specify the... [read more]
cnc_clr3dplsmov

Fanuc Focas Library | Position | cnc_clr5axpls

Clears the pulse amount for the manual feed for 5-axis machining.... [read more]
cnc_clr5axpls

Fanuc Focas Library | Position | cnc_distance

Reads the amount of distance to go of axis specified with axis. The amount of distance to go is stored in data[0] of ODBAXIS. All axes can be read... [read more]
cnc_distance

Fanuc Focas Library | Position | cnc_exaxisname

Reads the name of controlled axis and spindle name from 1st by the specified (*num), with supporting extended axis name. After execution,... [read more]
cnc_exaxisname

Fanuc Focas Library | Position | cnc_exaxisname2

Reads the name of controlled axis and spindle name from 1st by the specified (*num), with supporting extended axis name. After execution,... [read more]
cnc_exaxisname2

Fanuc Focas Library | Position | cnc_machine

Reads the machine position data of axis specified with axis. The machine position is stored in data[0] of ODBAXIS. All axes can be read at a time... [read more]
cnc_machine

Fanuc Focas Library | Position | cnc_prstwkcd

Presets the word coordinate selecting in CNC(absolute position). Preset data is specified by data[0] in IDBWRA. It is... [read more]
cnc_prstwkcd

Fanuc Focas Library | Position | cnc_rd3dmovrlap

Reads the movement amount (generally for 5 axes, in case of parallel axis, 5 + 5 = 10 axes) about 3-dimensional handle feed. The number of... [read more]
cnc_rd3dmovrlap

Fanuc Focas Library | Position | cnc_rd3dofschg

Read the modification of tool length compensation amount in tool axis direction. The places of decimal points can be got by... [read more]
cnc_rd3dofschg

Fanuc Focas Library | Position | cnc_rd3dpulse

Reads the handle interrupt pulse amount about 3-dimensional handle feed. The handle interrupt pulse amount in special handle feed mode(G156#0,... [read more]
cnc_rd3dpulse

Fanuc Focas Library | Position | cnc_rd3dtooltip

Reads the absolute position of the tool tip coordinates about 3-dimensional handle feed. The number of each axis and the tool... [read more]
cnc_rd3dtooltip

Fanuc Focas Library | Position | cnc_rd5axmandt

Reads the data for the manual feed for 5-axis machining.... [read more]
cnc_rd5axmandt

Fanuc Focas Library | Position | cnc_rd5axovrlap

Reads the machine axis movement for the manual feed of 5-axis machining. The axis number(axis) should be specified as 1..max controlled axes (for reading... [read more]
cnc_rd5axovrlap

Fanuc Focas Library | Position | cnc_rdaxisdata

Reads various data relating servo axis/spindle axis that is got by... [read more]
cnc_rdaxisdata

Fanuc Focas Library | Position | cnc_rdaxisname

Reads the axis names from 1st axis to the specified axis number. In case that *data_num is bigger than the current controlled axis number, this... [read more]
cnc_rdaxisname

Fanuc Focas Library | Position | cnc_rddynamic

Read various data which changes at CNC operation at a time. The data which can be read is as follows. Data Function... [read more]
cnc_rddynamic

Fanuc Focas Library | Position | cnc_rddynamic2

Reads various data which changes at CNC operation at a time. This function is the improved version of the... [read more]
cnc_rddynamic2

Fanuc Focas Library | Position | cnc_rdhndintrpt

Reads the handle interruption values from 1st axis to the specified axis number. In case that data_num is bigger than the current controlled axis... [read more]
cnc_rdhndintrpt

Fanuc Focas Library | Position | cnc_rdmovrlap

Read the manual overlapped motion value based on the input unit and based on the output unit. All axes can be read at a time by specifying ALL_AXES for... [read more]
cnc_rdmovrlap

Fanuc Focas Library | Position | cnc_rdposition

Reads the positions from 1st axis to the specified axis number. In case that *data_num is bigger than the current controlled axis number,... [read more]
cnc_rdposition

Fanuc Focas Library | Position | cnc_rdspcss

Reads the following data related to constant surface speed control on CNC side. Converted spindle speed value... [read more]
cnc_rdspcss

Fanuc Focas Library | Position | cnc_rdspdlname

Reads the spindle names from 1st spindle to the specified spindle number. In case that *data_num is bigger than all spindle number, this function sets... [read more]
cnc_rdspdlname

Fanuc Focas Library | Position | cnc_rdspdlspeed

This function does the calculation for serial spindle by which the gear ratio was considered against the rotation speed of spindle motor.... [read more]
cnc_rdspdlspeed

Fanuc Focas Library | Position | cnc_rdspeed

Reads the actual feed rate and the actual rotational speed of the spindle. The spindle speed, which can be read in this function, is one of the... [read more]
cnc_rdspeed

Fanuc Focas Library | Position | cnc_rdspgear

Reads the gear ratio of the serial spindle. The gear ratio is stored in data[0] of ODBSPN. All spindle can be read at a time by specifying... [read more]
cnc_rdspgear

Fanuc Focas Library | Position | cnc_rdspload

Reads the load information of the serial spindle. The load information of the serial spindle is stored in data[0] of ODBSPN. All spindle... [read more]
cnc_rdspload

Fanuc Focas Library | Position | cnc_rdspmaxrpm

Reads the maximum r.p.m. ratio of serial spindle. The gear ratio is stored in data[0] of ODBSPN. All spindle can be read at a time by specifying... [read more]
cnc_rdspmaxrpm

Fanuc Focas Library | Position | cnc_rdspmeter

Reads the spindle load meter data and the spindle motor speed data from 1st spindle to the specified spindle number. In case that data_num... [read more]
cnc_rdspmeter

Fanuc Focas Library | Position | cnc_rdsvmeter

Reads the servo load meter data from 1st axis to the specified axis number. In case that *data_num is bigger than the servo axis number, this function... [read more]
cnc_rdsvmeter

Fanuc Focas Library | Position | cnc_relative

Reads the relative position data of axis specified with axis. The relative position is stored in data[0] of ODBAXIS. All axes can be read at a time... [read more]
cnc_relative

Fanuc Focas Library | Position | cnc_relative2

Differences between functions of cnc_relative2 and functions of... [read more]
cnc_relative2

Fanuc Focas Library | Position | cnc_skip

Reads the skipped position of axis specified with axis. The skipped position is stored in data[0] of ODBAXIS. All axes can be read at a time by... [read more]
cnc_skip

Fanuc Focas Library | Position | cnc_srvdelay

Reads the servo delay amount of axis specified with axis. The servo delay amount is stored in data[0] of ODBAXIS. All axes can be read at a time by... [read more]
cnc_srvdelay

Fanuc Focas Library | Position | cnc_wrrelpos

Sets again relative position against the axis specified with type. Preset data is specified by data[0] in IDBWRR. If 0 is... [read more]
cnc_wrrelpos
Modified: 2018-06-11