CNC_WRTLCTLDATA | PUNCH

Specify the library handle.
See "Library handle" for details.

Pointer to the IODBTLCTL structure including the tool control data.
The IODBTLCTL structure is as follows.

·Series 16i/18i-P
typedef struct iodbtlctl {
    short   slct;          /* Flag of data selection */
    short   used_tool;     /* Number of used tool */
    short   turret_indx;   /* Number of turret index */
    long    zero_tl_no;    /* Zero point tool number */
    long    t_axis_move;   /* Turret axis movement */
    long    total_punch[2];/* Total number of punch operation*/
    short   reserve[11];   /* (reserve) */
} IODBTLCTL ;
·Series 0i-PD/PF, 30i/31i-LB, 30i/31i-PB
typedef struct iodbtlctl {
    short   slct;          /* Flag of data selection          */
    short   used_tool;     /* Number of used tool             */
    short   turret_indx;   /* Number of turret index          */
    long    zero_tl_no;    /* Zero point tool number          */
    long    t_axis_move;   /* Turret axis movement            */
    long    total_punch[2];/* Total number of punch operation */
    char    t_axis_dec;    /* Decimals places                 */
    char    reserve;       /* (reserve)                       */
    short   reserves[10];  /* (reserve)                       */
} IODBTLCTL ;

slct

Flag of data selection must be set.

bit 0	:	Number of used tool
bit 1	:	Number of turret index
bit 2	:	Zero point tool number
bit 3	:	Turret axis movement
bit 4	:	Total number of punch operation

bit 5,..,15

:

(reserve)

* In order to write the data to CNC, turn on the corresponding bit on this data.

used_tool

Specify Number of used tool. (0,..)

turret_indx

Specify Number of turret index. (0,..)
(This must be fewer than number of used tool.)

zero_tl_no

Specify Zero point tool number. (0,..)

t_axis_move

Specify Turret axis movement.

total_punch

Specify Total number of punch operation.

·Series 16i/18i-P

total_punch[0]	:	Lower (0,..,99999999)
total_punch[1]	:	Upper (0,..,99999999)

·Series 0i-PD/PF, 30i/31i-LB, 30i/31i-PB

total_punch[0]	:	Lower (0,..,999999999)
total_punch[1]	:	Upper (0,..,999999999)

t_axis_dec

·Series 0i-PD/PF, 30i/31i-LB, 30i/31i-PB only

Specify decimals places of Turret axis movement.

The corresponding data is as follows.

decimals places	corresponding data
t_axis_dec	t_axis_move

reserve

(reserve)

reserves

·Series 0i-PD/PF, 30i/31i-LB, 30i/31i-PB only

(reserve)