CNC_WRPUNCHTL_EX | PUNCH

Specify the library handle. See "Library handle" for details.

Specifies size of data to write (= 8 + (one of 2, 4 and 8)).

Specifies a pointer of the IODBPUNCH1_EX structure which sets the various of tool registration data (the tool number, the tool punch frequency, and the tool shape, etc.).

typedef struct iodbpunch1_ex {
    unsigned short  number ;            /* Data number(N)      */
    unsigned short  attr ;              /* Data attribute(M)   */
    union {
        unsigned short  u2data ;        /* Unsigned 2 bite     */
        short           s2data ;        /* Signed 2 bite       */
        unsigned long   u4data ;        /* Unsigned 4 bite     */
        long            s4data ;        /* Signed 4 bite       */
        unsigned long   u8data[2] ;     /* Unsigned 8 bite     */
    } u ;
    short           decimal ;           /* Decimal places      */
    short           reserve ;           /* Reserve             */
} IODBPUNCH1_EX ;

number

Specify Tool registration number .

attr

Specify kind of Write data.

buf.u

The Write data is stored by each data form.

The kind of the data number that can be specified, the data attribute , and the write data is shown in the following tables.

(a) Without the tool data setting function

Kind of write data	number	attr	Member at storage destination	Range of value
Number of use tools	0	0	u2data	0~136
Number of turret calculations	0	1	u2data	0~136
Starting point tool number	0	2	u2data	0~9999
Amount of turret axis movement	0	3	u4data , decimal	Refer to standard parameter setting table (B)
Total punch frequency	0	4	u8data	0~999999999999999999
Tool number	Nr	0	u2data	0~9999
Punch number	Nr	1	u4data	0~65535
Amount of X axis tool position correction	Nr	2	s4data , decimal	Refer to standard parameter setting table (A)
Amount of Y axis tool position correction	Nr	3	s4data , decimal	Refer to standard parameter setting table (A)
Turret calculation position	Nr	4	u4data , decimal	Refer to standard parameter setting table (B)
Tool number for tool change	Nr	5	u2data	0~9999
Tool life	Nr	6	u4data	0~65535
Tool shape for graphic drawing(C)	Nr	7	u2data	0~99
Size of tool for graphic drawing(I)	Nr	8	u4data , decimal	Refer to standard parameter setting table (B)
Size of tool for graphic drawing(J)	Nr	9	u4data , decimal	Refer to standard parameter setting table (B)
Angle of tool for graphic drawing(K)	Nr	10	u4data , decimal	IS-B????0.0~359.999

Nr: Tool registration number ( =1~136 )

?For multi tool control

Kind of write data	number	attr	Member at storage destination	Range of value
Small tool number	Nm	0	u2data	0~9999
Small tool calculation angle	Nm	1	s4data , decimal	0.0-359.999 in case of IS-B
Amount of Y axis tool position correction	Nm	2	s4data , decimal	Refer to standard parameter setting table (A)
Tool shape for graphic drawing(C)	Nm	3	u2data	0~99
Size of tool for graphic drawing(I)	Nm	4	u4data , decimal	Refer to standard parameter setting table (B)
Size of tool for graphic drawing(J)	Nm	5	u4data , decimal	Refer to standard parameter setting table (B)
Angle of tool for graphic drawing(K)	Nm	6	u4data , decimal	0.0~359.999 in case of IS-B

Nm: Multitool tool registration number + 200( =201~264 )

(b) With the tool data setting function

Kind of write data	number	attr	Member at storage destination	Range of value
Number of use tools	0	0	u2data	0~9999
Number of turret calculations	0	1	u2data	0~9999
Starting point tool number	0	2	u2data/u4data	0~99999999
Amount of turret axis movement	0	3	u4data , decimal	Refer to standard parameter setting table (B)
Total punch frequency	0	4	u8data	0~999999999999999999
Tool number	Nr	0	u2data/u4data	0~99999999
Punch number	Nr	1	u2data/u4data	0~999999999
Amount of X axis tool position correction	Nr	2	s4data , decimal	Refer to standard parameter setting table (A)
Amount of Y axis tool position correction	Nr	3	s4data , decimal	Refer to standard parameter setting table (A)
Turret calculation position	Nr	4	u4data , decimal	Refer to standard parameter setting table (B)
Tool number for tool change	Nr	5	u2data/u4data	0~99999999
Tool life	Nr	6	u2data/u4data	0~999999999
Tool shape for graphic drawing(C)	Nr	7	u2data	0~99
Size of tool for graphic drawing(I)	Nr	8	u4data , decimal	Refer to standard parameter setting table (B)
Size of tool for graphic drawing(J)	Nr	9	u4data , decimal	Refer to standard parameter setting table (B)
Angle of tool for graphic drawing(K)	Nr	10	u4data , decimal	0.0~359.999 in case of IS-B
Small tool calculation angle	Nr	11	s4data , decimal	0.0~359.999 in case of IS-B
Radius of multi tool	Nr	12	u4data , decimal	Refer to standard parameter setting table (B)

Nr: Tool registration number ( =1~Tool registration number )

It is possible to use the tool registration number to write as tool data up to No. 5000, When the multi tool control function is valid and parameter CMT (No.16282#5) is "1" .

?For multi tool control

Kind of write data	number	attr	Member at storage destination	Range of value
Small tool number	Nm	0	u2data	0~9999
Small tool calculation angle	Nm	1	s4data , decimal	0.0~359.999 in case of IS-B
Amount of Y axis tool position correction	Nm	2	s4data , decimal	Refer to standard parameter setting table (A)
Tool shape for graphic drawing(C)	Nm	3	u2data	0~99
Size of tool for graphic drawing(I)	Nm	4	u4data , decimal	Refer to standard parameter setting table (B)
Size of tool for graphic drawing(J)	Nm	5	u4data , decimal	Refer to standard parameter setting table (B)
Angle of tool for graphic drawing(K)	Nm	6	u4data , decimal	0.0~359.999 in case of IS-B
Radius of multi tool	Nm	7	u4data , decimal	Refer to standard parameter setting table (B)
Amount of X axis tool position correction	Nm	8	s4data , decimal	Refer to standard parameter setting table (A)

Nm: Tool registration number of the multi tool + 5000( =5001 to 5000+Items on the tool registration)

When the Graphic function is invalid, the following items cannot be write regardless of the tool data setting function or the multi tool control function.

·Tool shape of graphic drawing(C)

·Tool size of graphic drawing(I)

·Tool size of graphic drawing(J)

·Tool size of graphic drawing(K)