News CNCnetPDM About us Support  
       
  

CNC_RDMAG_PROPERTY | TOOLMNG

TOP

Description

Reads the magazine property data.

MTConnect Fanuc Adapter

Universal Fanuc Driver

Fanuc Focas Library CD

Declaration

#include "fwlib32.h" or "fwlib64.h"

FWLIBAPI short WINAPI cnc_rdmag_property( unsigned short FlibHndl, short *data_num, IODBMAGPRTY * magprty );

Arguments

FlibHndl   [ in ]

Specify the library handle. See "Library handle" for details.

data_num   [ in/out ]

The pointer to the number of reading data. ("1"-"8")
When all data is read, "-1" is set.

The magazine property data that belongs to one magazine number is counted by the set with one reading number.
Set the number of reading data to the data specified with the pointer beforehand.
The number of data actually read is returned to "*data_num" when the execution of this function ends.

magprty   [ in/out ]

The pointer to the structure that storage the magazine property data.
IODBMAGPRTY structure is as follows.
When the number of reading data ("data_num") is not "-1", set the reading magazine numberto the structure data of "mag" beforehand.


typedef struct  iodbmagprty {
    short           mag ;           /* Magazine number           */
    short           reserve ;       /* Reserved                  */
    unsigned char   mag_info ;      /* Magazine information data */
    char            reserve[3] ;    /* Reserved                  */
    short           mt_line ;       /* Matrix line number        */
    short           mt_row ;        /* Matrix line number        */
    long            cstm[4] ;       /* Customize data            */
} IODBMAGPRTY;

Return

EW_OK is returned on successful completion, otherwise any value except EW_OK is returned.

The major error codes are as follows.

Return code Meaning/Error handling
EW_BUSY
(-1)
Wait until the completion of CNC processing, or retry.
EW_LENGTH
(2)
Reading number(data_num) is wrong.
EW_NUMBER
(3)
Magazine number(magprty.mag) is wrong.
EW_NOOPT
(6)
No option
The Tool management function 64-pairs, 240-pairs or 1000 pairs and the tool management extension B function are necessary.

As for the other return codes or the details, see "Return status of Data window function"

CNC option

This function need the following CNC option.

    The Tool management function 64-pairs, 240-pairs or 1000 pairs and the tool management extension B function are necessary.

For HSSB connection,

    The extended driver/library function are necessary.

For Ethernet connection,

    The Ethernet function and the extended driver/library function are necessary.

    However, in case of Series 16i/18i/21i-B, 0i-F and 30i, the required CNC option is as follows.

    When Embedded Ethernet is used,

      above two optional functions are not required.

    When Ethernet board is used,

      only Ethernet function is required.

CNC parameter

This function is related to the following CNC parameter.
See the manual of CNC parameter for details.

Magazine property / pot property (No.13210#1=1)

CNC mode

This function can be used in any CNC mode.

Available CNC

0i-A 0i-B/C(Note) 0i-D 0i-F 15 15i 16 18 21 16i-A 18i-A 21i-A 16i-B 18i-B 21i-B 30i-A 30i-B
M (Machining)X X X O X X X X X X X X X X X O O
T (Turning) X X X O X - X X X X X X X X X O O
LC (Loader) - - - - - - X X X X X X X X X - -

0i-D0i-F16i18i30i-A30i-B
P (Punch press)X X X X - X
L (Laser) - - X - - X
W (Wire) - - X X X X


Power Mate i-DX
Power Mate i-HX
Power Motion i-AX

"O" : Both Ethernet and HSSB
"E" : Ethernet
"H" : HSSB
"X" : Cannot be used
"-" : None

Note) 0i-C does not support the HSSB function.

See Also

cnc_wrmag_property   cnc_delmag_property  

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/fanuc-focas-library/toolmng/cnc_rdmag_property

Fanuc Focas Library | ToolMng | cnc_btlfpotsrh

Searches the empty pot in the same magazine based on the specified pot position.... [read more]
Fanuc Focas Library | ToolMng | cnc_btlfpotsrh

Fanuc Focas Library | ToolMng | cnc_delmagazine

Deletes the registered Tool management data number from the Magazine management table. This function searches at the Magazine... [read more]
Fanuc Focas Library | ToolMng | cnc_delmagazine

Fanuc Focas Library | ToolMng | cnc_delmag_property

Deletes the magazine property data.... [read more]
Fanuc Focas Library | ToolMng | cnc_delmag_property

Fanuc Focas Library | ToolMng | cnc_delpot_property

This function deletes the pot property data within the range specified by s_number and data_num.... [read more]
Fanuc Focas Library | ToolMng | cnc_delpot_property

Fanuc Focas Library | ToolMng | cnc_deltool

Deletes the Tool management data which is specified by the start data number and the number of the data from the Tool management... [read more]
Fanuc Focas Library | ToolMng | cnc_deltool

Fanuc Focas Library | ToolMng | cnc_rdmagazine

Reads the registered Tool management data number from the Magazine management table.... [read more]
Fanuc Focas Library | ToolMng | cnc_rdmagazine

Fanuc Focas Library | ToolMng | cnc_rdpot_property

This function reads the pot property data within the range specified by s_number and data_num.... [read more]
Fanuc Focas Library | ToolMng | cnc_rdpot_property

Fanuc Focas Library | ToolMng | cnc_rdtool

Reads the Tool management data which is specified by the start data number and the number of the data from the Tool management... [read more]
Fanuc Focas Library | ToolMng | cnc_rdtool

Fanuc Focas Library | ToolMng | cnc_rdtoolgeom_tlm

The tool geometry data of number specified by datanum is read from the tool geometry data number specified by snum.... [read more]
Fanuc Focas Library | ToolMng | cnc_rdtoolgeom_tlm

Fanuc Focas Library | ToolMng | cnc_rdtool_f2

Reads the Tool management data which is specified by the start data number and the number of the data from the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_rdtool_f2

Fanuc Focas Library | ToolMng | cnc_regmagazine

Registers the Tool management data number to the Magazine management table. This function searches at the Magazine management table... [read more]
Fanuc Focas Library | ToolMng | cnc_regmagazine

Fanuc Focas Library | ToolMng | cnc_regtool

Registers the Tool management data which is specified by the start data number and the number of the data to the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_regtool

Fanuc Focas Library | ToolMng | cnc_regtool_f2

Registers the Tool management data which is specified by the start data number and the number of the data to the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_regtool_f2

Fanuc Focas Library | ToolMng | cnc_reg_toolstrage

Storage position of magazine number and pot number is registered or released to tool management data. By specifying the storage position of... [read more]
Fanuc Focas Library | ToolMng | cnc_reg_toolstrage

Fanuc Focas Library | ToolMng | cnc_tool_move

The tool management data number is moved specifying the magazine number and the pot number of the source and the destination. When Tool Management... [read more]
Fanuc Focas Library | ToolMng | cnc_tool_move

Fanuc Focas Library | ToolMng | cnc_wrmagazine

Writes the Tool management data number to the entry of the Magazine management table specified by magazine number and pot... [read more]
Fanuc Focas Library | ToolMng | cnc_wrmagazine

Fanuc Focas Library | ToolMng | cnc_wrmag_property

Writes the magazine property data.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrmag_property

Fanuc Focas Library | ToolMng | cnc_wrpot_property

This function writes the pot property data within the range specified by s_number and data_num.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrpot_property

Fanuc Focas Library | ToolMng | cnc_wrtool

Writes the specified Tool management data to the Tool management data table. In case of writing the individual data on the Tool... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtool

Fanuc Focas Library | ToolMng | cnc_wrtool2

Writes the individual data on the Tool management data to the specified Tool management data table.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtool2

Fanuc Focas Library | ToolMng | cnc_wrtoolgeom_tlm

The tool geometry data of number specified by datanum is written from the tool geometry data number specified by snum.... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtoolgeom_tlm

Fanuc Focas Library | ToolMng | cnc_wrtool_f2

Writes the specified Tool management data to the Tool management data table. In case of writing the individual data on the... [read more]
Fanuc Focas Library | ToolMng | cnc_wrtool_f2

Fanuc Focas Library | ToolMng | flist_ToolMng

CNC: Function related to tool management data... [read more]
Fanuc Focas Library | ToolMng | flist_ToolMng
Modified: 2023-12-05