News CNCnetPDM About us Support  
         
  

DATA RELATING TO AUXILIARY AXIS J2CT MONITOR | CITIZEN MITSUBISHI COMMANDS

Droop Rotational speed Load current MAX current 1 MAX current 2 Load factor Regenerative load Current station number present location Target station number Command position Position control gain 1 Spe

See: Device Driver for Citizen Mitsubishi controllers

CommandDescription
SECT_J2CT_MON_DRPDroop
SECT_J2CT_MON_REV_SPEEDRotational speed
SECT_J2CT_MON_LOAD_CURRENTLoad current
SECT_J2CT_MON_MAX_CURRENT1MAX current 1
SECT_J2CT_MON_MAX_CURRENT2MAX current 2
SECT_J2CT_MON_MOTOR_LOADLoad factor
SECT_J2CT_MON_C_LOADRegenerative load
SECT_J2CT_MON_CURRENT_STATION_NUMCurrent station number
SECT_J2CT_MON_CURRENT_POSpresent location
SECT_J2CT_MON_INST_STATION_NUMTarget station number
SECT_J2CT_MON_INST_POSCommand position
SECT_J2CT_MON_POS_CONT_GAIN_1Position control gain 1
SECT_J2CT_MON_SPEED_CONT_GAIN_1Speed ??control gain 1
SECT_J2CT_MON_POS_CONT_GAIN_2Position control gain 2
SECT_J2CT_MON_SPEED_CONT_GAIN_2Speed ??control gain 2
SECT_J2CT_MON_INTEG_COMPENSSpeed ??integral compensation
SECT_J2CT_MON_LOAD_INERTIALoad inertia ratio
SECT_J2CT_MON_AMP_TYPE_NAMEUnit type name
SECT_J2CT_MON_SW_VERSIONS / W version
SECT_J2CT_MON_MOTORmotor
SECT_J2CT_MON_ALARM_HISTORY1_NUMAlarm history (hour) 1
SECT_J2CT_MON_ALARM_HISTORY2_NUMAlarm history (hour) 2
SECT_J2CT_MON_ALARM_HISTORY3_NUMAlarm history (hour) 3
SECT_J2CT_MON_ALARM_HISTORY4_NUMAlarm history (time) 4
SECT_J2CT_MON_ALARM_HISTORY5_NUMAlarm history (time) 5
SECT_J2CT_MON_ALARM_HISTORY6_NUMAlarm history (hour) 6
SECT_J2CT_MON_ALARM_HISTORY1_INFOAlarm history (number) 1
SECT_J2CT_MON_ALARM_HISTORY2_INFOAlarm history (number) 2
SECT_J2CT_MON_ALARM_HISTORY3_INFOAlarm history (number) 3
SECT_J2CT_MON_ALARM_HISTORY4_INFOAlarm history (number) 4
SECT_J2CT_MON_ALARM_HISTORY5_INFOAlarm history (number) 5
SECT_J2CT_MON_ALARM_HISTORY6_INFOAlarm history (number) 6

 

Privacy notice

This website uses cookies. By continuing to use it you agree to our privacy policy. 

https://www.inventcom.net/support/citizen-mitsubishi-commands/data-relating-to-auxiliary-axis-j2ct-monitor
Support | Citizen Mitsubishi Commands | Overview
Here yo can find a list of command sections for Mitsubishi CNC controllers on... [read more]
Overview
Support | Citizen Mitsubishi Commands | Axis independent parameter
Axis name Basic Specification Para # 11 abson Absolute position set # 1 SET Absolute position set # 2 base Absolute position set SET_FIN Machine end E - G Axis specification para... [read more]
Axis independent parameter
Support | Citizen Mitsubishi Commands | Axis status
/ * First reference point * / / * 2nd reference point * / / * Third reference point * / / * Fourth reference point * / / * Servo OFF status * / / * In the mirror image * / / *... [read more]
Axis status
Support | Citizen Mitsubishi Commands | Buffer correction
Start buffer correction Buffer correction end Acquire buffer correction status Buffer correction point acquisition (O number) Acquire buffer correction point (block) Buffer... [read more]
Buffer correction
Support | Citizen Mitsubishi Commands | Data on alarm
Absolute value alarm: attribute : Sub 1 : Sub 2 :number Servo alarm: attribute : Sub 1 : Sub 2... [read more]
Data on alarm
Support | Citizen Mitsubishi Commands | Data on arbitrary axis superposition
Arbitrary superimposition control data 1 Arbitrary superimposition control data 2 Arbitrary superimposition control data 3 Arbitrary superimposition control data 4 Arbitrary... [read more]
Data on arbitrary axis superposition
Support | Citizen Mitsubishi Commands | Data on current NC program and running status
O: Program number (main program) N: Sequence number (main program) B: Block number (main program) O: Program number (subprogram) N: Sequence number (subprogram) B: Block number... [read more]
Data on current NC program and running status
Support | Citizen Mitsubishi Commands | Data on date time etc
Power on time Automatic operation time Auto start time External integration 1 hour External integration 2 hours date Times of Day Power-on time (unit: motion cycle) Automatic... [read more]
Data on date  time etc
Support | Citizen Mitsubishi Commands | Data on forced output of device
Modal output device 1 Modal output number 1 Modal output data 1 Modal output device 2 Modal output number 2 Modal output data 2 Modal output device 3 Modal output number 3 Modal... [read more]
Data on forced output of device
Support | Citizen Mitsubishi Commands | Data on I F of super option
Data setting completion flag PC command NC status Point balance Used points Purchase point Subtraction point 1 Subtraction point 2 Warning point 1 Warning point 2 See:... [read more]
Data on I  F of super option
Support | Citizen Mitsubishi Commands | Data on M S T B function
M directive S command (1st spindle) S command (second main spindle) S directive (third spindle) S command (fourth main spindle) S command (fifth spindle) S directive (sixth... [read more]
Data on M  S  T  B function
Support | Citizen Mitsubishi Commands | Data on Machine Para Open I F
Machine para opening I / F 1 Machine para opening I / F 2 Machine para opening I / F 3 Machine para opening I / F 4 Machine para opening I / F 5 Machine para opening I / F 6... [read more]
Data on Machine Para Open I  F
Support | Citizen Mitsubishi Commands | Data on machine specification
Stored stroke limit (+) # 2014 OT + Stored stroke limit (-) # 2015 OT- Axis parameter # 8208 Soft limit + Axis parameter # 8204 Soft limit - Rotational axis # 1017 rot Diameter... [read more]
Data on machine specification
Support | Citizen Mitsubishi Commands | Data on memory read write
Memory read / write 1 byte data Memory read / write 2 byte data Memory read / write 4 byte data See: Device... [read more]
Data on memory read  write
Support | Citizen Mitsubishi Commands | Data on message notification
Message notification information Message notification busy flag Message notification status Driver processing time Message reception function processing time See:... [read more]
Data on message notification
Support | Citizen Mitsubishi Commands | Data on PLC switch load meter display
PLC switch name PLC switch input signal PLC switch input signal (collective) PLC switch output signal PLC switch output signal (collective) Road meter comment See:... [read more]
Data on PLC switch load meter display
Support | Citizen Mitsubishi Commands | Data on position switch
Axis name 1 Dog position 1-1 Dog position 2-1 Axis name 2 Dog position 1-2 Dog position 2-2 Axis name 3 Dog position 1-3 Dog position 2-3 Axis name 4 Dog position 1-4 Dog... [read more]
Data on position switch
Support | Citizen Mitsubishi Commands | Data on power supply monitor servo axis main axis
Power Supply Quantity Power supply name Unit type name Unit serial number S / W version Connected drive Recovered energy Power-supply voltage PN bus voltage MINPN bus voltage Bus... [read more]
Data on power supply monitor servo axis main axis
Support | Citizen Mitsubishi Commands | Data on program correction I F in program check
Reverse Block Stop Request Buffer correctability information See: Device Driver for Citizen Mitsubishi... [read more]
Data on program correction I  F in program check
Support | Citizen Mitsubishi Commands | Data on servo axis name position state etc
Number of axes (reset state) Axis state Machine position (double type) Current position (double type) Work coordinate position (double type) Remaining command Origin Zero... [read more]
Data on servo axis name position state etc
Support | Citizen Mitsubishi Commands | Data on servo monitor servo axis
Number of axes Axis name gain Droop Rotational speed Feed speed Load current MAX current 1 MAX current 2 MAX current 3 Overload Regenerative load Estimated disturbance torque MAX... [read more]
Data on servo monitor servo axis
Support | Citizen Mitsubishi Commands | Data on servo monitor spindle type servo
Number of axes Axis name gain Droop Rotational speed Feed speed Load current MAX current 1 MAX current 2 MAX current 3 Overload Regenerative load Estimated disturbance torque MAX... [read more]
Data on servo monitor spindle type servo
Support | Citizen Mitsubishi Commands | Data on super option
Option bit 1 Option bit 2 Option bit 3 Option bit 4 Option bit 5 Option bit 6 Option bit 7 Option bit 8 Option bit 9 Option bit 10 Option bit 11 Option bit 12 Option bit 13... [read more]
Data on super option
Support | Citizen Mitsubishi Commands | Data on tool life management Lifetime management method I II
Tool life management ?: Time Tool life management ?: Number of times Tool life management ?: Status Tool life management ?: Tool No. Tool life management ?: Status Tool life... [read more]
Data on tool life management Lifetime management method I II
Support | Citizen Mitsubishi Commands | Data on tool offset
Tool correction group number Tool correction amount: Edge wear amount: X Tool correction amount: cutting edge wear amount: Z Tool correction amount: Edge wear amount: Y Tool... [read more]
Data on tool offset
Support | Citizen Mitsubishi Commands | Data on tuning of NC specification
Effective line Inch unit # 1041 I_inch Input unit # 1003 Edit lock B During automatic operation Automatic operation active Machining program tape storage length MACHINE Maker... [read more]
Data on tuning of NC specification
Support | Citizen Mitsubishi Commands | Data on variable
Local Variable Macro Subpro Number of sets of common variable (# 100 ~) Common variable (# 100 ~) Number of sets of common variable (# 500 ~) Common variable (# 500 ~) Custom... [read more]
Data on variable
Support | Citizen Mitsubishi Commands | Data on waveform display screen
Sampling period Sampling type Sampling start trigger signal Sampling start trigger level Sampling data size Waveform display Horizontal scale Sampling data code Sampling data... [read more]
Data on waveform display screen
Support | Citizen Mitsubishi Commands | Data on work offset
G 58 Work coordinate system offset G59 Work coordinate system offset G54 Work coordinate system offset (extension I / F) G55 Work coordinate system offset (extended I / F) G56... [read more]
Data on work offset
Support | Citizen Mitsubishi Commands | Data related to auxiliary axis J2CT control
Number of auxiliary axes Axis valid / invalid information driving Operation adjustment mode Absolute position set Position set state Operation mode Operating parameters... [read more]
Data related to auxiliary axis J2CT control
Support | Citizen Mitsubishi Commands | Data relating to spindle monitor including spindle type servo
Number of axes Axis name gain Droop Rotational speed Load MAX current 1 MAX current 2 MAX current 3 Overload Regenerative load Estimated disturbance torque MAX disturbance torque... [read more]
Data relating to spindle monitor including spindle type servo
Support | Citizen Mitsubishi Commands | Data relating to the operating state etc of the spindle
First spindle rotation speed Second spindle rotation speed Third spindle rotation speed Fourth spindle rotation speed Fifth spindle rotation speed Sixth spindle rotation speed... [read more]
Data relating to the operating state etc of the spindle
Support | Citizen Mitsubishi Commands | Driving state
See: Device Driver for Citizen Mitsubishi controllers... [read more]
Driving state
Support | Citizen Mitsubishi Commands | Event I F
DPRNT function start / end notice DPRNT execution state MelPostMessageEx start notification MelPostMessageEx start end notice MelPostMsgBufferEx start notification... [read more]
Event I  F
Support | Citizen Mitsubishi Commands | Key history data
History function control History data update check Read history data See: Device Driver for Citizen... [read more]
Key history data
Support | Citizen Mitsubishi Commands | Local variable screen invalid state macro
/ * Exact * / / * Override * / / * Feed hold * / / * MST completion * / / * Single block * / See: Device... [read more]
Local variable screen invalid state macro
Support | Citizen Mitsubishi Commands | M600L compatible I F for Citizens group
Network option 06 Network option 07 Network option 08 Network option 09 Network option 11 Network option 11 Network option 12 Network option 13 Network options 14 Network option... [read more]
M600L compatible I  F for Citizens group
Support | Citizen Mitsubishi Commands | MELDAS NET failure diagnosis information
Presence / absence of fault diagnosis information See: Device Driver for Citizen Mitsubishi controllers... [read more]
MELDAS NET failure diagnosis information
Support | Citizen Mitsubishi Commands | MELDAS diagnostic data
Initialization of diagnostic information Check for existence of diagnostic information SRAM maximum size of diagnostic information DRAM maximum size of diagnostic information NC... [read more]
MELDAS diagnostic data
Support | Citizen Mitsubishi Commands | Memory Read Write
See: Device Driver for Citizen Mitsubishi controllers... [read more]
Memory Read Write
Support | Citizen Mitsubishi Commands | NC system information acquired
See: Device Driver for Citizen Mitsubishi controllers... [read more]
NC system information acquired
Support | Citizen Mitsubishi Commands | NC system information setting
APLC token string over APLC token Returned value See: Device Driver for Citizen... [read more]
NC system information setting
Support | Citizen Mitsubishi Commands | Operation mode
/ * Step mode STP * / / * Fast-forward mode RPD * / / * Automatic Dogless type Home Return AST * / / * Home return ZRN * / See:... [read more]
Operation mode
Support | Citizen Mitsubishi Commands | Option check macro for acquisition
See: Device Driver for Citizen Mitsubishi controllers... [read more]
Option check macro for acquisition
Support | Citizen Mitsubishi Commands | Option check macro for setting
See: Device Driver for Citizen Mitsubishi controllers... [read more]
Option check macro for setting
Support | Citizen Mitsubishi Commands | Parameter
G00 dry run Macro single Ignore middle point Machine lock high speed ABS / INC address G04 Time fixed Interference avoidance Command unit 10 times Decimal type 2 G00... [read more]
Parameter
Support | Citizen Mitsubishi Commands | Parameter access level
See: Device Driver for Citizen Mitsubishi controllers... [read more]
Parameter access level
Support | Citizen Mitsubishi Commands | PLC device
Device B (one shot) link relay Device C (one shot) counter input Device C (one shot) counter output Device E (one shot) special relay Device SM (one shot) special relay Device F... [read more]
PLC device
Support | Citizen Mitsubishi Commands | PLC message information macro
/ * PLC alarm message 1 * / / * PLC alarm message 2 * / / * PLC alarm message 3 * / / * PLC alarm message 4 * / / * PLC operator message * / See:... [read more]
PLC message information macro
Support | Citizen Mitsubishi Commands | Simulation I F
Mode set Mode reset Forwarding information Interpolation type Coordinate system type Data precision type Data transfer request See:... [read more]
Simulation I  F
Support | Citizen Mitsubishi Commands | Sub system information acquisition macro
/ * Sub-line identification number * / / * Sub-line calling system * / / * Sub-line calling information * / / * Wait for sub-system completion * / See:... [read more]
Sub system information acquisition macro
Support | Citizen Mitsubishi Commands | System common alarm information acquisition macro
/ * System alarm * / / * Spindle alarm * / / * MCP alarm * / / * Basic PC alarm * / / * User PC alarm * / / * Spindle warning * / / * MCP warning * / / * System warning * / See:... [read more]
System common alarm information acquisition macro
Support | Citizen Mitsubishi Commands | System independent alarm information acquisition macro
/ * System alarm * / / * Servo alarm * / / * MCP alarm * / / * Program error * / / * System warning * / / * Servo warning * / / * MCP warning * / / * Operation error * / / * Stop... [read more]
System independent alarm information acquisition macro
Modified: 2017-09-02