CNC_RDPSCDEDGE | LASER

Specify the library handle. See "Library handle" for details.

Specify the start edge cutting data group number.

Pointer to the number of edge cutting data. Specify the number of edge cutting data to be read before function call, and the number of edge cutting data being read actually is stored after the function call.

Pointer to the IODBEDGE structure including the edge cutting data of the cutting condition file. The IODBEDGE structure is as follows.

typedef struct iodbedge {
    short   slct;       /* Flag of valid data */
    short   angle;      /* Judge angle for edge */
    short   power;      /* Piercing power */
    short   freq;       /* Piercing frequency */
    short   duty;       /* Piercing duty */
    long    pier_t;     /* Piercing time */
    short   g_press;    /* Piercing gas press */
    short   g_kind;     /* Piercing gas select */
    long    r_len;      /* Recovery distance */
    short   r_feed;     /* Recovery feedrate */
    short   r_freq;     /* Recovery frequency */
    short   r_duty;     /* Recovery duty */
    short   gap;        /* Deflection/gap */
    short   reserve[4]; /* (reserve) */
} IODBEDGE ;

slct

Flag of valid data is set.

bit 0	:	Judge angle for edge
bit 1	:	Piercing power
bit 2	:	Piercing frequency
bit 3	:	Piercing duty
bit 4	:	Piercing time
bit 5	:	Piercing gas press
bit 6	:	Piercing gas select
bit 7	:	Recovery distance
bit 8	:	Recovery feedrate
bit 9	:	Recovery frequency
bit10	:	Recovery duty
bit11	:	Deflection/gap
bit12,..,15	:	(reserve)

* When a bit is 0, it means the corresponding data hasno meaning.

angle

Judge angle for edge is set.

(Setting range: 0 to 180, Unit: degree)

power

Piercing power (peak value) is set.

(Setting range: 0 to 9999, Unit: W)

freq

Piercing frequency is set.

(Setting range: 5 to 2000, Unit: Hz)

duty

Piercing duty is set.

(Setting range: 0 to 100, Unit: %)

pier_t

Piercing time is set.

(Setting range: 0 to 999999, Unit: 0.001sec.)

g_press

Piercing gas press (assist gas pressure) is set

(Setting range: 0 to 255, Unit: 0.1Kg/cm2)

g_kind

Piercing gas select (kind of assist gas) is set

(Setting range: 1 to 7, Unit: kind)

r_len

Recovery distance is set.

(Setting range: 0 to 99999, Unit: 0.001mm)

r_feed

Recovery feedrate is set.

(Setting range: 0 to 9999, Unit: mm/min)

r_freq

Recovery frequency is set.

(Setting range: 5 to 2000, Unit: Hz)

r_duty

Recovery duty is set.

(Setting range: 0 to 100, Unit: %)

gap

Deflection/gap is set.

(Setting range: -32767 to 32767)

reserve

(reserve)