NON FERROUS CIRCULAR SAWING MACHINES | SAWING AND FILING MACHINES
CNCnetPDM for Non Ferrous Circular Sawing Machines enables to detect the average pass-trough time, find out the time of production when working operator-less and analyze product costing of the shop floor.
CNCnetPDM connects machineslike Sawing and filing machines, Press Brakes Hydraulic, Centerless Polishing Machines or Blasting machines continuous automatic seamlessly with ERP MES f.i. Plex Online (Plex Systems), Prophet 21 (Epicor), Opera (I, II and 3) (Pegasus Software) or CGram Enterprise (CGram Software) and delivers consistent informationMachine Efficiency, Work order or batch Cycle Time (Hours) (Measure and Report), Actual Available Time (Hours) or Shift Scheduled Production in real time.
Automatically acquiresmanufacturer(BBT, TRANSFERTLINE, STAVELEY or VILHELM PEDERSEN...) and controller-specific(HEIDENHAIN TNC 122, BROTHER TC 225, MORI SEIKI MSX-850 MSX-850III or DECKEL FP2 - FP4...) signals and operator input.
Convertsinput(Extended S address selected, Current operating mode, Key signal (output) or Program end, abort; M02, M30) to uniform machine stateslike Idle, Maintenance Assist, Low Material or Blocked (Blocked Down).
Transformsstates(e.g. Idle, Maintenance Assist, Low Material or Blocked (Blocked Down)) to indicators(Production Rejects, Total Pieces, Takt Time or Actual Run Rate).